Now that cable TV is going to convert to digital TV, what should I do if I can t see cable TV?

Digital TV is much clearer than the analog signal of cable TV, my home has just changed, the set-top box is about 300 yuan a year, and cable TV is more than 100, after the installation of digital signals can be more than the original more than 40 channels, very good, you may say that it is useless to have so many channels, but since you want to install cable TV in a unified manner, there is no way. But there should be another way, and that is Ann"pots"The satellite network is also available, and there is no charge, many small hotels are using this, but I still recommend that you save money on the set-top box, because the satellite signal is expressly forbidden by the country, and the signal will be very unstable. Anyway, you should think about it.

In fact, when we installed digital TV at home, the staff said that it was free to watch for three months! After that, it was broken! If you want to see it again, you have to pay for it!

But! I don't know why it's been almost a year on our side, and no one collects money! It's not broken!

I'm still looking at it! I don't know if that's the case over there! If you can watch it for free for three months, then install it first!

It's free anyway! I'll figure it out in three months! Maybe it's the same as us!

After three months, no one will care!

If there is a cost to install a set-top box, it should be borne by the landlord, and it seems that there is no money yet.

The set-top box is free to distribute and install, but the fee is expensive, just let your landlord take the cable TV certificate at the time and add the ID card to handle it, and then the cable TV fee paid before becomes the digital TV fee, ****, the rest remains the same!

However, there is only one free distribution, if you still have a TV at home, and you also want to watch digital TV, you have to pay for a new set-top box, otherwise you won't be able to watch it!

If your TV supports cable reception, you can switch your digital TV to cable TV by the following methods:

Locate the "Input" or "Source" button on your TV panel or remote.

Select the appropriate wired input channel. You may need to press the "Enter" button several times to find the corresponding entry lane.

If you already have your cable receiver connected to your TV, turn on your cable receiver and select the desired channel.

Note that digital TV and cable TV use different sources, so you'll need to switch the TV receiver port to the appropriate input channel.

Hope mine can help you.

Here's how to switch from digital TV to cable TV:

Point the TV remote at the TV and press the source button on the remote control to bring up the source menu.

In the source menu option of the TV, find the TV mode, and press the confirm button to switch to the active TV mode. Hail destroys leaks.

Digital electro-material infiltration supports wired interfaces that can be plugged in as needed, and then switches modes to cover and balance, and you can see the TV programs received through the lead antenna when you search the station.

Summary. 、The set-top box does not perform the automatic search and there is no program, you can press the menu key of the set-top box remote control to find the automatic search station, press the confirm button to perform the automatic search station, and the TV program can be displayed after the search station.

2. It may also be that there is a problem with the connection line between the set-top box and the TV, which causes the TV to display no program, you can reconnect it again, pay attention to the connection cable and interface to be plugged in firmly.

3、The signal source of the TV is not switched to the matching mode, resulting in the TV displaying no program,You can press the signal source button of the TV remote control,After popping up the signal source menu option,Switch the signal source mode one by one,Until the TV shows the picture of the set-top box。

4. In addition, it may also be that the set-top box is not renewed in time when the authorization period expires and the service provider is shut down, resulting in no program. In this case, you will need to contact your local TV service provider to renew your subscription in order to return to normal.

5. Or there is no program due to communication link failure, server failure, or set-top box failure, which also needs to contact the local TV service provider for troubleshooting and repair.

What's the matter with cable TV not having channels.

、The set-top box does not perform the automatic search and there is no program, you can press the menu key of the set-top box remote control to find the automatic search station, press the confirm button to perform the automatic search station, and the TV program can be displayed after the search station. 2. It may also be that there is a problem with the connection line between the set-top box and the TV, which causes the TV to display no program, you can reconnect it again, pay attention to the connection cable and interface to be plugged in firmly. 3、The signal source of the TV is not switched to the matching mode, resulting in the TV displaying no program,You can press the signal source button of the TV remote control,After popping up the signal source menu option,Switch the signal source mode one by one,Until the TV shows the picture of the set-top box。

4. In addition, it may also be that the set-top box is not renewed in time when the authorization period expires and the service provider is shut down, resulting in no program. In this case, you will need to contact your local TV service provider to renew your subscription in order to return to normal. 5. Or there is no program due to communication link failure, server failure, or set-top box failure, which also needs to contact the local TV service provider for troubleshooting and repair.

What to do if cable TV does not have channels.

So let's see if there's a problem with the collection? Is the connection of the machine not plugged in?

The lines are all right, but they don't come out of the channel.

If it's okay now, it's that there's a problem with the pot.