What is the shortcut key for N95 phones?

The method of N95 hard grid machine:

Turn off the power first, press and hold the dial key, "* key, "3" key while turning on the power, turn on the power until the word "nokia" appears, you can't release any button during this process, wait a few seconds until "formating...... appears", then you can release the button. 3 After 5 minutes, the system format is completed, the phone will automatically restart and enter the standby screen, and re-enter the phone time;

There are several points to pay attention to: keep the power absolutely sufficient, do not try to shut down the machine on the way, do not plug in the charger, etc., if it is violated, it may cause serious consequences such as burn-in. There is also a hard grid may be a little damage to the hardware of the machine, not to be foolish, do not use the hard grid when the machine can not be turned on, and one thing to note is that the line 2 will disappear after the grid, and it must be restored to the kf flash.

The easiest, use the "Factory Reset" feature in your phone's settings and follow the prompts.

Hard * plus 3 keys plus dial number key, press not to go to press the power button, wait until the two-hand icon appears, OK

Soft grid: enter "*" in standby mode, prompt whether to restore all original phone settings, select "Yes", prompt to enter password, the original password is "12345", the phone will automatically restart after entering, and the format will be completed after booting;

Hard grid: After powering off, press and hold the "*" 3" and "green call button" at the same time, and then press the power button to turn on the phone, until the screen appears "formating...".If you let go of the wording, the screen will turn black from left to right, and it will automatically restart after it is completely black, and the formatting will be completed.

Press the 3, green button desperately, and then ask others to help press the boot button, don't let go until the boot is successful. I probably don't have to press it that long, but I usually do it that way, and I never fail.

Do you keep pressing the answer button 3 * and then press the power button until you enter the autoformat, remember to hold it down.

Press and hold at the same time.

Key 3 key. Dial the power on key.

* It is to restore the factory settings (soft grid, the contents of the C disk will be all emptied, and then the system information will be newly written).

It is also a factory reset (this is different from the grid machine, after the execution changes, the display will not clear the C drive file).

Hard grid, operation steps: turn off first, press the dial key +*+3 in the shutdown state, remember to hold these three keys at the same time, and then press to turn on, until the reset time zone appears, it means success.

If you want to enter the password after the grid: Nokia initial code is: 12345

There are two ways to format a machine for n95:

1. Soft grid: enter * in order under the standby screen, and then display the phone to factory settings, and ask you to enter the lock code, the initial password is: 12345, if you have changed the phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, 1, 2 minutes later, the grid will be completed, re-enter the time zone and time of the phone;

2. Hard grid: turn off the computer first, and then press and hold the dial key, * key and number 3 key at the same time before turning on the phone, and turn on the power, this process can not release any button, wait a little 1, 2 minutes until the time of entering the mobile phone time and time zone, you can release the button, at this time has been hard formatted.

There are several points to note about the above two types of grids: keep the power absolutely sufficient, the grid machine can not be tried to shut down on the way, if it is violated, it may cause serious consequences such as burn-in, remember to back up important files and data before formatting the machine, formatting is an irreversible operation, once the phone is formatted, so the later installation, copy of the file will be lost.

Please see my tutorial,Grid machine is generally in the case of too many junk files on the mobile phone,Serious errors can not be recovered or the phone is abnormal,The grid machine will clear all the contents of the C:disk,Then write new system information,So please back up the data and information you need before the machine。 There are three types of lattice machines:

1. Soft grid: enter * on the mobile phone, after which you are asked to enter the lock code, the initial password is: 12345, if you have changed the mobile phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, 3 5 minutes later, it will be completed, and the mobile phone time will be re-entered after the grid; 2. Hard grid:

Turn off the power first, press and hold the dial key, "* key, "3" key while turning on the power, turn on the power until the word "nokia" appears, you can't release any button during this process, wait a few seconds until "formating...... appears", then you can release the button. 3 After 5 minutes, the system format is completed, the phone will automatically restart and enter the standby screen, and re-enter the phone time; 3. Through the software grid: install the system tools software, there is a formatting option in it, you can enter the lock code to grid the machine.

There are several points to pay attention to in the above grid: keep the power absolutely sufficient, do not try to shut down the grid on the way, do not plug in the charger, etc., if it is violated, it may cause serious consequences such as burn-in. There is no harm in the lattice machine.

Save the contents of the machine first, and as soon as you format it, there will be nothing.

Then press *, then OK.

1. Single recovery setting, enter * in standby case, password 12345;

2.Soft grid, enter * in standby situation, password 12345;

3. Hard grid: press and hold the dial key, "* key, "3" key at the same time, and then press and hold the hang-up button to turn on the power until the word "nokia" appears, this process can not release any button, wait a few seconds until "formating...... appears", then you can release the button. 3 After 5 minutes the system formatting is complete.

I remember it was the AFK button plus snowflake plus 3!

Or just take the computer and check it!

Dial key +*+3

Try a few more times, and I used to too. This method is the right one.

Method: a. Soft grid machine.

1. The easiest, use the "Factory Reset" function in the phone settings, and follow the prompts.

2. Enter * - soft reset of the mobile phone (save ** number, information, incoming and outgoing caller numbers, etc.) after the grid).

3. Enter *, the original password is 12345. Will your phone prompt you to restore all factory settings? The phone will restart, select Yes, and then enter the lock code, the default is 12345, and select Confirm after entering.

Note: If you boot up and start the e-disk software (such as call enhancement, screen saver, etc.) and Q9 and T9 fonts, it is invalid to format them with this method. Therefore, before the soft grid, close all these software, and delete the Chinese font file before the format can be successful.

Font files are generally under system fonts, please change the name to the fonts directory to delete the font file, and then delete!

b. Hard-grid machine.

This method is generally used when the system is so chaotic that it can't be turned on

After powering off, press and hold the call button, the number 3 button, and the * button at the same time, and then press power on. Don't let go, at this point the phone has already started to format (some older models will have an English waiting note when the grid is displayed). Press one piece, don't let go of one, and wait for the phone to automatically turn on and ask for the input time to complete the grid.

This formatting is more thorough and does not cause invalid formatting.

Other: Turn off and press the * + power on button, and start the grid without any prompt.

Precautions: Sufficient power must be guaranteed when formatting, and generally it should be operated under full power. It's a good idea to uninstall all the software and see if you get any similar "system errors".

If there are no similar "system errors", then proceed to the grid. Do not attempt to shut down the machine during the grid, do not plug in the charger, etc. Also, try to give priority to the soft grid.

The software part that was originally installed on the expansion card will be affected, so under normal circumstances, the important data of the expansion card will be backed up and then formatted, and all the programs saved in the E disk will be reinstalled after the format of the mobile phone is completed.

In short, the most thorough formatting steps are: uninstall all the programs that can be uninstalled in the program management - take out the extension card - check whether there are any system errors - format the phone - install the extension card - format the expansion card - (the mobile phone at this time is the purest basic system) - install the programs that need to be installed - restore the address book - complete.

c. Preparation before the grid machine and resume work after passing the machine.

1. Back up your address book - open the card holder - Options - Mark All - Copy - to memory card.

2. Format the mobile phone See a and b above for the operation method.

3. Restore Contacts Open the business card holder - Options - Copy - From memory card.

4. Use a card reader to back up the files that need to be backed up in the extension on your computer.

5. Format the expansion card with your phone.

6. Restore the English-Chinese dictionary thesaurus.

9. Adjust your phone settings.

10. Settings - Data Management --- Memory Card - Options - Backup Phone Storage, keep a relatively clean backup of phone settings on the expansion card.

11. Install the required software.

12. Done.

There are two ways to format a machine for n95:

1. Soft grid: enter * in order under the standby screen, and then display the phone to factory settings, and ask you to enter the lock code, the initial password is: 12345, if you have changed the phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, 1, 2 minutes later, the grid will be completed, re-enter the time zone and time of the phone;

2. Hard grid: turn off the computer first, and then press and hold the dial key, * key and number 3 key at the same time before turning on the phone, and turn on the power, this process can not release any button, wait a little 1, 2 minutes until the time of entering the mobile phone time and time zone, you can release the button, at this time has been hard formatted.

There are several points to note about the above two types of grids: keep the power absolutely sufficient, the grid machine can not be tried to shut down on the way, if it is violated, it may cause serious consequences such as burn-in, remember to back up important files and data before formatting the machine, formatting is an irreversible operation, once the phone is formatted, so the later installation, copy of the file will be lost.

1. * Factory reset (this is different from the grid machine, the display and settings are changed after execution, and the C drive file will not be cleared).

2. Hard grid machine, operation steps: turn off the machine first, and press the dial button in the shutdown state.

3 buttons, remember to hold these three keys at the same time, and then press to turn on until the screen shows formatimg.

S60 hard grid machine method: in the case of power off, press and hold the call button, 3 button, * word key, and then press and hold the power on until the screen of starting grid machine appears. It's a good idea to have enough power and unplug the memory card beforehand.

The soft grid is useless, the hard grid is to press *3 to boot the machine and don't let go and wait for it to appear.

Grid: Menu - Tools - Utilities - Memory Card - Options - Format Memory Card.

Soft-grid phone: Standby screen input*

You can't just have a soft-grid mobile phone without a card, usually you have a card and then a soft-grid phone.

Truth be told, there is no difference between hard and soft cells, which are rewriting indexes, and hard cells are complete repartitions of the data store in flash memory.

Generally, when you encounter a small problem, you will have a soft grid, that is, *, and you will brush the machine directly when you encounter a big problem. The so-called hard grid is, what do you say to hurt the CPU or something, what basis do you ask him? I had this saying when I played 7610, it's okay, don't care.

I've always been a small problem with a soft grid, and a big problem directly brushes the machine. As long as the grid machine is not regular, it is fine. Personally, I feel that the phone will slow down after the number of times the grid machine is more.,At this time, you can solve it by swiping the machine.。

Pure hand-played, I hope it helps you.

If you want to say that the grid machine still chooses the hard grid.

The hard grid is like the first installation of the system on the computer, and the benefits are:

1: Completely delete all data, including viruses, (phone memory) 2: Completely rearrange the built-in storage, so that the original files are arranged neatly, there is no fragmentation in the storage, and there is no waste of space.

It is equivalent to doing a disk defragmentation) 3: Of course, the system instability caused by unreasonable installation files or settings before the grid will be eliminated.

Not to mention the soft grid, it is just a factory reset, and it cannot achieve the effect of defragmentation.

It is recommended to check the card first and then the machine, after turning off, press and hold the call key, 3 key, * key at the same time, and then press the power on do not let go, at this time the mobile phone has begun to format together and press it together, do not let go, and wait for the mobile phone to turn on and require the input time grid machine to complete. Back up before the grid, the mobile phone is very tired of typing, and you can try to be different if you don't have a grid.