What kind of fishing reel is used for both the rock rod and the sea

Hand sea dual-purpose rod first of all the main body is the hand rod, and then with imitation wheels for fishing when catching big fish for walking fish, generally speaking, the sea rod will not exceed the meter length, too long to use it is not very convenient, subject to the terrain and the surrounding environment is more limited, the wheel is generally more than four axes on it, the rotation is flexible, how to buy a good wheel if the economic conditions are allowed.

First, prepare the appropriate material and model of fishing line, fold it in half, and then fold one end of the wire back to make a coil. Thread the thread into it and repeat this step. When finished, the two sections of the knot are tightened, and the excess threads are cut off.

Then take out the pre-prepared sea rod wheel, open the wire cup holder, put the coil on the ** cup and tighten it. Finally, wrap the fishing line ** cup around it to make it tightly combined, and then it can be used. <

The sea rod is one of the fishing rods, which is a more commonly used rod, especially for fishing in deep waters. There is a sea rod wheel on the sea rod, which is an auxiliary equipment, which can play a role in pay-off, take-up and buffering. When using, you need to install the thread before you can use it.

First of all, you need to prepare the appropriate material and model of fishing line, and fold the fishing line in half. Then, fold one end of the wire back so that you can make a coil. Then, thread the thread end into it so that the two thread ends that are folded in half for the first time can be wrapped.

After that, you need to repeat this step and pull both ends of the knot tight. At this point, there will be extra threads that may hinder the fishing process, and you will need to cut off all of them. Take out the sea rod wheel, open the wire cup holder, put the coil on the ** cup and tighten it.

As mentioned above, reels can play an important role when fishing, so it is necessary to choose the most suitable reel. Specifically, there are many types of sea rod fishing reels, among which the two that have better effects and are very commonly used are double-bearing reels and pressure reels. The characteristics of these two wheels are different and are suitable for different environments, so you can choose according to your needs.

Among them, the former has better performance and is also very common in scope. Their construction is very precise, especially the spindle disc and bearing, which play a major role. This wheel is suitable for fishing in the deep sea or for large fish species in the ocean.

The latter are a more common type of wheel, they are faster and the entanglement of the line is not easy to mess up. They also experience less resistance in the water and are easier to use.

Sea rod reel loading method:

1. Connect the fishing line with the fishing reel. Open the wire cup on the fishing reel, put the fishing line into the reel, tie the end of the fishing line into a "cow rein", and then release the end of the line and pull it outward, so that the fishing line is stuck on the reel.

2. Wrap the fishing line around the fishing reel. Pull back the wire stop cup, hold the fishing wheel seat in your left hand, and shake the fishing wheel handle back with your right hand, and pull the line evenly to the winding spool while the wire cup rotates. The line should not be over-entangled, and it is advisable to wrap two-thirds of the fishing wheel, otherwise it is easy to blow up the line.

3. Tie the connector. Install the fishing wheel on the base of the fishing rod, pass the wire end on the fishing wheel through the wire hole at the lower end in turn, and finally tie a connector.

Precautions: 1. When knotting the fishing line with the fishing wheel, you can also directly tie the knot, as long as the fishing line can be fixed on the ** wheel, there is no knotting method. After all, when we use the sea rod, the knotted part is usually buried at the bottom and is hardly used.

2. If we shake the handle when the fishing line slips, it is recommended to open the wire cup to manually wrap the fishing line a few more times or directly fix the coil with a small piece of tape, so that we can wind the line normally.

3. Try to find a helper when winding the line, and gently hold the fishing line with a soft and slippery towel, so that the fishing line is more compact.

Supplement: When winding the line, we can also install the fishing wheel on the sea rod first, thread the fishing line from the top guide ring in turn, and then tie it to the fishing reel. The difference between them is not huge, just the order.