The computer system disk has adjusted the partition size, what should I do after the boot shows BAD

Open the Easeus Partition Master partition tool;

Purpose: To free up 20GB of free space for disk C to be used on disk D.

Step 1: Free up 20G space on the D drive.

In the pop-up window, you can see the detailed information of the partition, such as the use of space and the remaining space, because it is to divide a part of the space to the C disk, so it is necessary to divide it in front of the D disk, so that the D disk will free up 20G space, and the 20G space will be integrated into the C disk;

Step 2: Integrate 20G of unallocated space into drive C. Right-click on the C drive and select Adjust Move Partition;

You can see that the C drive is partitioned, and the blank area behind it is the 20 unallocated space vacated by the D drive in step 1.

At this point, all operations are done, and you need to click Apply to make it take effect;

A confirmation prompt pops up, click Yes;

All the above operations are carried out under the system, and the partition in use cannot be adjusted in the system, so you need to restart to adjust the partition, click [Yes];

The system will adjust the partition when the computer is turned on, as shown in the figure below, when the progress bar is completed, it will automatically restart, enter the system, and then all the partition adjustments will be completed.

end precautions.

In step 10, when adjusting the partition, do not power off, and do not force the shutdown or restart, otherwise the partition will be lost or the hard disk will be damaged.

It can be formatted in PE mode.

Once the system is installed, you generally need to repartition if you want to resize the partition, but repartitioning will destroy all the data in the hard disk, which often makes us in a dilemma. If you don't have a second hard drive to transfer data, you can consider using partitionmagic, which can resize hard drive partitions and copy, merge, split, and convert partitions without damaging data. Unlike other tools, tools like partitionmagic should be used sparingly, as any operation with hard disk partitions can be quite dangerous.

PartitionMagic, while powerful, can only be used when you have to, because the more you use it, the greater the risk, and the consequences can be catastrophic if you encounter a power outage while using it. 1. Adjust the partition capacity Due to the lack of consideration when the original partition, the application has new needs or a new operating system to be installed, there is often a situation where the capacity of a partition is insufficient, especially the C disk is often troubled by the lack of remaining space, then partitionmagic can show its skills. 1.

Select Hard Disk and Partition Run partitionmagic, select "Adjust the capacity of a partition" in the taskbar on the left side of the software window, the "Adjust Partition Capacity Wizard" will pop up, click "Next", first select the hard drive you want to adjust the partition, and then enter the next step to select the partition you want to adjust the capacity of the partition branch 2Resize the partition The dialog box that appears next shows the size of the current hard disk capacity and the minimum and maximum allowable capacities. You can enter the size of the changed partition in the value box for "New capacity of the partition".

Note: The maximum value cannot exceed the maximum capacity allowed in the prompt above. Then in the next dialog box, select which partition you want to reduce the capacity to replenish the partition you are adjusting. Finally, you need to confirm the changes made on the partition.

In the dialog box, there will be a comparison between the before and after adjustments, and after the check, you can click the "Done" button to return to the main interface. 3.Perform the action The above is just a plan for the partition adjustment, and in order for it to work, you need to select the "Apply" button in the lower left rail.

An Apply Changes dialog box pops up, select Yes to start making adjustments, and the Process dialog box pops up. There are three progress bars that show the operation process, and you will only be done by restarting your computer when you are done. Hint:

If the two partitions you are adjusting have important data, remember to back them up. During the adjustment process, do not read or write to the partition where the operation is performing. In addition, it takes a long time to operate the Bizi bend, so be sure to take care of the children at home, as well as cats and dogs, and never let their hands get close to the computer, and pray that the power will not be cut off.

Absolutely! I used Sakurabu! I don't talk too much about it!

partition magic

1.However, please be reminded that you should plan the operation steps yourself, not too many, too many operation steps will take a long time!

2.Also, it is best not to lose power halfway, after the power is off, it may lead to data loss, but not absolutely!

3.If the hard drive disappears, that is, it is hidden, a simple recovery method to restore the system partition!

You first use the C disk backup to make an image file (**gho) and put it in other disks, and then split the C drive to the size you want, and finally restore the backup C disk image file to the past. It is worth noting that your C drive still has enough capacity, and it is best to have 5G for slow silver marking. Disturbance.

This method can be done unscathed!

PQ Partition Magician can do it.

Computer hard drive partition resizing requires specialized software, taking Partition Assistant as an example:

2. After installation, open Partition Assistant.

Take resizing the G disk as an example:

a, first left-click the disk you want to adjust, and then click the partition you want to adjust:

b. In the open dialog window, press and hold the button to adjust the movement with the left mouse button to move to the left;

c, move to g: disk size is: , release the mouse button, click: OK;

d. Go back to the partition helper window, left-click the submit button on the toolbar, and then click: execute (p) to start the adjustment.

e, the computer restarts, after the startup to perform the operation of adjusting the moving partition, after the operation is completed, the computer restarts again, into the system. Open the computer and see that the size of disk g: has been adjusted to:;

f. The adjusted unallocated disk can be used to create a new disk or to expand the partition of other disks.

Yes, choose to repartition the next time you install the system.

You can choose to divide it into several zones and the size of each zone can be set.

You toss so many times, of course the recovered data is bad, you should rescue when there is an error in the partition, instead of asking for help now, the data may be basically damaged, it is basically impossible to recover completely, you change the recovery software to try it, when you reply, you must restore it to an external device, such as a mobile hard disk or another hard disk, if you have recovered to the original hard disk, then there will be a lot of data damage.

After partition 1, lossless resizing will move the data, and the data will be damaged, and the data will be damaged after the partition is turned on, and the read and write data will damage part of the data.

3. You use software to recover by yourself, if it is installed on the hard disk, then it will damage part of the data, 4. Restore it to the hard disk by yourself, and it will damage part of the data.

So if you understand, ask for help as soon as there is a problem.

Now workaround.

1. Change the software to recover to other hard drives.

2. Shut down and find a data recovery center, and give money to recover, ** is not expensive, according to the capacity of the hard disk.

Before you are familiar with this kind of software, you should not use disks with important data to do experiments;

You've made it like this, and it's probably irreparable;

Data is so important that it can only be taken to a company that specializes in data recovery.

If you should use diskgenius to resize the partition, resize the partition losslessly;

If you can't open the data recovery now, it may be that the file is damaged, you can change the data recovery software and try again, you can try the data recovery wizard; After the scanning, like **, office documents can be previewed, and those that can be successfully previewed can be recovered;

If you try it, the effect is still like this, then send the disk to a professional data recovery company to help recover it, ** will be slightly higher, but the effect should be okay;

Remember to back up important data in time in the future.

It cannot be restored after partitioning. This one is a one-off.

Now in this case, it's better to find a data recovery company

Shore a deletion software on the computer that can make the deleted things back back as you try it.

C: Don't be too big Only scan the C disk when you boot The larger the C drive, the slower the boot will Develop a good habit Don't install software on the C disk Temporary files are moved out of the C drive In short: Don't enlarge the C drive is right.

It doesn't seem to be, and things will be gone after the split. To buy a plate, you must have a partition function.

There are specialized disk utilities that can do this, but when it comes to the C drive, it is easy for the system to crash.

45g is enough and it is not recommended to try it.

partition magic, resize the partition, separate 100g and merge with the C drive.

There's plenty of space on the C drive, so why bother.

Big brother: What do you want so many g for your system disk? 45g is enough, 100g is too much.

Do you put all the software data on the C drive?

This is unscientific, the general children's shoes that play with the computer will not install the software data on the C disk, because this not only slows down the system, but also is not good for the data, because you can't tell when to install the system, your data will be gone.

Therefore, 45G is enough, and the C disk space occupied by the general system is only about 4G, and Win7 may be more, but it will only be one or two more G at most

In this way, your C drive still has a lot of space.

Besides, if the hard disk is to be repartitioned, all the data in your disk, including the data in the CFF disk, will be gone, that is to say, the entire hard disk will be formatted, and then partitioned.

You can't partition without formatting, because when you partition, it will automatically format it for you.

Besides, after repartitioning, your system will have to be reinstalled.

In this way, your C drive will be formatted 2 times, which is not good for the hard disk.

Because when you install the system, you will also format the C disk first, and you will write to the new system, but when you install the system, you will not have the information of the other disks.

Go to ** diskfix,This software can automatically find the lost partition,I've used this software to help my classmates recover twice,The data has been found,If you have a disc that talks about liquid rain forest wood,Boot select "DOS universal toolbox",Then enter"diskfix"(Some of them may not have this software), it will help you get back your lost partition. This picture is entry"DOS Universal Toolbox" (the name may not be exactly the same).

Right click my computer, management, disk tube buried grinding, see if there is no partition, if there is a new partition of the liquid pie, pq for Chinese support is not good, partition is easy to laugh He problems,

Try recovering a partition table with DiskGenius.

Under this software, reformat the recovered partition.

Press the F12 key to enter the quick boot menu when the power is turned on, and select ***-rw Enter.

Here I select the disc to boot because the pratition tool is on this disc.

Select Paragon Partition Manager

If you want to expand the C drive, you can adjust the capacity of the E drive first, and then adjust the capacity of the D drive.

Here, because I am installed according to the regular win7, the C drive is a reserved partition, the D disk is actually the C disk, the E disk is actually the D disk, and the F disk is actually the E disk.

Note: To expand the capacity of the C disk, you must first adjust the back disk, and then adjust the previous partition disk. This is important to remember.

Select the E drive, right-click and select [Move to resize partition].

Hover over the left edge of the E area, and then there will be a prompt icon of the left and right arrow keys, after this icon appears, pull the area to the right to vacate the left area, and the capacity of the left area is to be expanded to the C drive.

Press [Yes] and select the D drive, right-click and select [Move to resize partition].

At this time, you can see that the right area of the D drive is the left area of the E drive just now, and similarly, hover the mouse over the right edge of the left area of the D drive, and pull it to the bottom when the arrow key icon appears.

Press [Yes] and then click [Apply] to start adjusting the capacity of the D drive and the E drive.

2. Adjust the partition capacity.

1. Open the main interface of the partition tool, and in the "Select a task" area in the left pane, select "Adjust the capacity of a partition", and then select Next.

2. In the "Select Partition" interface, select "C", and then go next.

3. In the "Select New Partition Capacity" interface, specify the new capacity of the partition, and then step up.

4. In the "Confirm Partition Capacity" interface, click "Finish" to return to the main partition interface.

5. In the main partition interface, right-click the "Unassigned" partition in the right pane, and select "New" in the open menu to open the "Create Partition" interface.

6. In the "Create Partition" interface, carefully select and fill in the requirements, and then click "OK".

7. Hit "Apply" in the lower left corner.

8. In the "Apply Changes" confirmation, hit "Yes", and then "OK".

9. Automatic restart, at this time, you should wait patiently for the system self-test, and after the self-test is completed, restart the computer to see if the C is separated.

Note: In order to ensure that the C disk files are not lost, to move the files that need to be saved in the C disk to the U disk, and at the same time it is best to delete the files other than the system, after removing and deleting, if the total amount of Chinese parts in the C disk is 5G, the capacity of the C disk after setting the partition should be more than 5G, it is recommended that the capacity of the C disk is 10-15G.