A beginner s guide to Dell notebooks, steps to install a Dell notebook system

The cloud disk link has been sent to you in a private message, you can see if it is what you need.

Learning endlessly, I hope it can help you, if you are satisfied, if you are not satisfied, please continue to ask.

Hello, the factory reset method is as follows:

1. Before booting into the system, press F8 to enter the advanced boot options of Windows 7 and select "Repair Computer".

2. Select the keyboard input method.

3. If there is an administrator password, you need to enter it; If you don't have a password, just "OK".

4. Once you are in the System Recovery option, select "Dell DataSafe Restore and Emergency Backup".

6. Select "Restore My Computer" and click "Next".

7. After selecting the correct factory image, click "Next" to start restoring the system to the factory state.

Note that the notebook needs to be connected to an adapter during the recovery process. When you're done, restart your computer.

Hello, my computer is Dell's, I have installed n computer systems, let me tell you how to install the system for dell's notebook.

1.Restart the computer (if the computer is turned off, turn on the computer, hehe)2Put the system disk into the optical drive.

3.Crazy press F12 to select boot from optical drive (cd***-rom)4Then press any key to start booting from the optical drive.

5.If it is to install XP,Then fill in the serial number first (cracked version and pirated do not need to fill in) and then choose which partition to install,Later, as long as the next step is installed on Vista,If it is installed Vista or Win7,After selecting the installation partition,Fill in your information directly in the next step where you should fill in your information,Installing the system is as simple as installing software。

Good luck with the reinstallation of the system

Dell i3 has its peculiarities: using the built-in system can be installed into the hard disk by default (the system disk is loaded into the optical drive. Restart the computer, press F12, and select *** VCD as the first startup in the pop-up window), and install it automatically.

2. Use other tray mounting systems. Remove the hard drive, press it on another computer (desktop, laptop), and load the program into the hard drive. When you are about to boot from the disc and enter the hard disk to boot, quickly cut off the power supply, then remove the hard disk, install it on the original computer, and let it automatically default and restart.

3. After the system is installed, it can be installed on the [Drive Life] automatic detection and installation. b.You can use a U disk (a U disk with a system that has been made), the computer is set to Hard Disk or HDD at the first start, and after entering the system, install the system according to the prompts.

Dear users, hello:

Here's how to do it for your reference:

1.Restart your computer (or turn it on if it's turned off)2Put the system disk into the optical drive.

3.Please press F12 to select Boot from CD ***-ROM)4Then press any key to start booting from the optical drive.

5.If it is to install XP,Then fill in the serial number first (it is recommended that you install it with a genuine system) and then select which partition to install on,Later, as long as the next step is installed on Vista or Win7,After selecting the installation partition,Fill in your information directly in the next step where you should fill in your information,Installing the system is as simple as installing the software。

Dell is here for you.

Start the machine press F12, there are several options, you choose CD *** will appear in a while the disc boot interface, if you repartition all of them, choose PM or DM!

If you distinguish it or not, select one key to install it on the C disk (usually the first item), you don't have to care, and when the copy is finished, the machine will restart by itself, and take out the disc (you can also take it out, press enter out of the interface, and don't care).

Almost twenty minutes, ok

See if the drivers are driven up (right-click on my computer, Properties, Management, Device Manager, see if there is any?) No. or! If not, it's all up!

1.Reboot the machine, press F2 (F12 if not) to enter the BIOS, find the boot order boot sequence, and change the boot order to boot from the optical drive. Exit after saving.

2.Put the system disk into the CD-ROM drive, reboot the machine, the machine will automatically boot the installer from the optical zone, and follow the prompts to perform simple response operations until the installation is completed.

3.Check the driver installation, right-click my computer --Explorer--Driver Manager, see if there is a yellow question mark, if there is a yellow question mark, put the driver disc into the CD-ROM drive, double-click the yellow question mark, let the computer automatically boot and install the relevant drivers, and wait for the installation of each driver to be completed.

What kind of disk are yours?,Take a look.,The disc can be started.,What model are you, I'm dell after-sales.。 If you have any questions, you can tell me.

It is recommended to refer to the manual operation, 1. The use of laptops is very knowledgeable. The operator should cherish and pay attention to maintenance.

2. The battery should not be taken off the computer for a long time, and the charging needs to be fully charged, and the power adapter needs to be unplugged after the charging is full. to extend battery life.

3. The brightness of the display needs to be adjusted to the most appropriate, and the brightness can be maintained at 70% at night, and it can be reduced to 60% during the day. It is mainly to adapt to the vision of your own eyes.

4. After the computer is turned on, it needs to be shut down normally to avoid the forced shutdown process.

5. Clean up the dust in time to increase the heat dissipation effect. The surface of the computer should be well dusted at all times, and the CPU needs to be cleaned once a year. Add thermally conductive silicone.

6. The touchpad also has a lifespan, if there is a mouse, try to use the mouse to avoid damage to the touchpad.

Hello answer, I have seen your question and am sorting out the answer, please wait a moment Hello, it will be a pleasure to answer your question. Personally, I think that way, after inquiry, you can know that life concerns 8, enter the username and password correctly. Just restart your computer.

2.How to use Dell computers The installation process is the same as that of ordinary computers, the only difference is that the biod menu of the old host is different. You boot the computer and press del into the BIOS settings, this should be no problem, and then find advanced or something (seems to be this one of the main options), there is a first boot in it, that is, the default read data path after your computer boots, modify the content of the first boot to cd-rom, and then press F10 to save and exit the reboot.

Put the system disc into the optical drive (note that the disc must be a CD, not ***, otherwise it can't be read), the computer will read the system from the disc after restarting, and then automatically install the system to the C disk according to the prompts. 3.How to connect the new Dell computer to the network I hope it will help you!

I wish you a happy life and a happy day.