If the mobile phone gets into the water, turning it on and turning it off will definitely burn the m

Yes, the mobile phone will generate current when it is turned on and off by water, which may burn the motherboard. If the phone gets into water, immediately open the back cover and unplug the battery. Once the motherboard is burned, it won't turn on.

If the phone gets into the water, the first thing to do is to take the battery immediately.

Come out and wait until the phone water is completely clean.

Put the battery on and try to see if it is damaged, and if it is broken, it will be repaired.

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not use a hair dryer to blow or bake at high temperature (including microwave heating) after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. The mobile phone is composed of precision electronic components, and there is a potential risk after water ingress, so please keep the mobile phone turned off.

4. If you don't have a backup data, there may be a risk of data loss during repair.

It won't necessarily burn the motherboard, but there is a high chance that it will do.

After the mobile phone is turned on after water is in, the water in the electrical device will cause a short circuit and burn the electrical device. In addition, water will produce an electrolytic reaction under the action of electricity, which accelerates the corrosion of electrical devices and motherboard electric cover pants. Even if there are no electrical devices and motherboards are burned by luck, it will cause corrosion of electrical devices and motherboard circuits.

Therefore, the mobile phone cannot be turned on immediately after entering the water. Only when the water is dry and cleaned can it be turned on for testing.

How to deal with water after the phone is ingressive:

1. Quickly remove the battery or shut it down.

2. Remove the water on the surface, and remove the water inside as much as possible.

3. Put the phone and battery in a cool and ventilated place and let it dry. If possible, you can use a fan or fan to blow the mold dry. (Note: The fan should be at room temperature, not hot air.) The hot air will cause the water to seep into the motherboard to expand and damage the motherboard. ）

4. The mobile phone can be disassembled and hung with strong hands-on ability. And you can use a soft cloth to wipe off the water.

5. It is best to place the battery for 48 hours before using the pure wheel.

Operating phone: iphone13

Operating system: ios13

The phone can be turned on after 12 hours of water ingress and shutdown.

This is directly related to the material of the mobile phone, the mobile phone in the process of use, if the water is in, it will cause serious damage to the motherboard battery and circuit of the mobile phone, if the power is turned off and the water must be thoroughly controlled after the water is cleaned, so that the motherboard and the line can return to normal application state, this time takes about 12 hours to turn on.

The reasons why the phone can't be charged after water is in the water are as follows:

1. The system of the mobile phone is faulty, which causes problems with the battery level display. This kind of problem is the easiest to solve, you can directly shut down and restart, which is equivalent to data refresh, and the general power display will return to normal.

2. The charger is faulty. This malfunction is the main reason why the phone cannot be charged. So how to judge the quality of the charger.

It's actually very simple, try it with another charger. If it can be charged, then it can be concluded that the charger is faulty. When you encounter this kind of problem, you have no choice but to buy another charger.

3. Poor contact between the charger and the mobile phone. This is also a common occurrence of the charger not being plugged in due to the carelessness of the mobile phone user. The solution is simple, it is to switch sockets back and forth.

4. There is a problem with the mobile phone battery. Generally speaking, it is rare to have problems with your phone's battery. But once there is a problem, it is a big problem and must be taken seriously.

Therefore, when it is found that the charger and mobile phone system are not faulty, you should focus on checking the battery. If you find that the battery is swollen, then it means that there is a problem with the battery and you must stop using it immediately. Do not disassemble the battery indiscriminately.

Because a swollen battery can easily cause **, bringing serious consequences.

5.There are quality issues with the phone itself. If you buy a copycat phone, then there is a high probability that the mobile phone will malfunction. If it is a brand machine, it needs to be returned to the original factory for processing. <>

If you can turn it on, you can use the phone's own heat to evaporate the water. If you can't turn it on, bury your phone in the rice for a while to absorb the water and then turn it on.

1. After the mobile phone enters the water, cut off the power immediately, and do not turn it on for use.

2. Shake dry vigorously to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3. Put it under a slight heat source such as a desk lamp and spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry.

4. If there is something left on the screen and it is very serious, do not deal with it according to the first point and paragraph 3, because although the electronic circuit after this treatment can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

5. If it is dropped into corrosive liquid (such as toilet, seawater, etc.), immediately rinse the machine with clean water. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

6. Disassemble the machine as soon as possible and clean it with alcohol or professional washing water. If you can't disassemble the machine yourself, it is recommended to send it to a repair shop.

1. After the mobile phone enters the water, cut off the power immediately, and do not turn it on for use.

2. Shake dry vigorously to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3. Put it under a slight heat source such as a desk lamp and spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry.

4. If there is something left on the screen and it is very serious, do not deal with it according to the first point and paragraph 3, because although the electronic circuit after this treatment can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

5. If it is dropped into corrosive liquid (such as toilet, seawater, etc.), immediately rinse the machine with clean water. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

6. Disassemble the machine as soon as possible and clean it with alcohol or professional washing water. If you can't disassemble the machine yourself, it is recommended to send it to a repair shop.

At this time, it is necessary to shut down immediately and put it in the sun, otherwise it is easy to be damaged.

If you just fall into it, take it out immediately and dry it with a hair dryer, but if it has been taken out for a few minutes, then you need to go to the after-sales service or repair the mobile phone as soon as possible, and clean the motherboard and small board with alcohol after disassembling the mobile phone, otherwise even if you can turn on the machine temporarily, there will be a large degree of various failures in the next few days, the reason is that the motherboard is corroded, and then the cost of repairing it will be most.

After the mobile phone is flooded, most of the cases cause failures such as failure to turn on, abnormal display of the mobile phone and noise on the call.

1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;

2.Take out the SIM card and memory card of the mobile phone in time, and remove the battery if the mobile phone is a removable battery;

3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;

4.If it is not cleaned after liquid ingress, it will accelerate the oxidation and damage of the vertical parts of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and maintenance as soon as possible.

Notes:

1.Please do not open or charge the Yuxiang rubber machine after water ingress, at this time, powering may cause short circuit damage to the mobile phone components;

2.Please do not try to shake off the moisture by shaking the phone, this operation may cause the liquid to seep into other components;

3.Please do not use a hair dryer or oven to bake the mobile phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (after the moisture inside the mobile phone is heated into water vapor by the hair dryer, etc., it may seep into other components of the screen, which will make the hand banquet block damp and damage the electronic components).

After-sales method: Please bring the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing by professional engineers. If the phone cannot be used normally, the mobile phone data cannot be backed up, and you can recall whether you have migrated the data to other devices or whether you have the function of using cloud services, and if so, you can keep it in advance.