My computer is ASUS X550, how do I reinstall the system?

Updated on number 2024-03-26
7 answers
  1. Anonymous users2024-02-07

    There are three ways to install it:

    1. Hard disk installation method:

    3. Find it in the E drive.

    ghost image installer. exe (which could also be.)

    Or. Hard drive installer. exe or.

    setup-

    Or. Install the system. exe, etc.), double-click to run. If it is in ISO format, you can install it by decompressing it and running it directly.

    4. Click OK in the open window, click OK when you encounter anything, and start the installation (you may restart the computer, don't worry).

    2. U disk (PE installation method):

    2. Prepare a USB flash drive (8G or larger is recommended) and follow it.

    Just follow the methods and steps inside, and it's very detailed.

    3. Disc installation method:

    Press the del key when you boot up, enter the BIOS, set it to boot from the optical drive, exit after saving, put in the disc and restart the machine, select the installation system option after entering the installation screen, after installation, before restarting, use the previously mentioned method to change the boot mode to start from the hard disk, and restart the machine.

    Special note: If there is an accident in the installation process or the installation of individual machines is not ideal or ideal, or some hard disks have reserved or hidden partitions (left by the system with win7 or better version, usually 100-hundreds of megabytes), please enter the PE system to format them and repartition them before installation.

  2. Anonymous users2024-02-06

    2. Click Environment Detection.

    3. After the environment is detected, there will be a reinstallation type, one is pure reinstallation, that is, a new system is installed, the contents of the C disk will be updated, and the other disks will be fine. The other is a reserved reload. That is, the original data file settings are retained after reinstallation.

    Here it is recommended to select Keep to try reinstall.

    Note: Back up your data before reinstalling.

  3. Anonymous users2024-02-05

    Summary. Steps to reinstall the ASUS laptop system.

    1. Preparation before reinstalling the system:

    1. At least 4G USB flash drive.

    2. Ultraiso floppy disk.

    2. ASUS Laptop Reinstall Win7 Win8 System Installation Tutorial:

    1. Start the software ultraiso2 with administrator privileges, and find the location of your installation image in the local directory of the open interface.

    3. Double-click the installation image to pop up the detailed details.

    4. Click Boot - Write Hard Drive Image in the menu, open the interface, and select the USB flash drive you want to use as the boot disk. If there is something in the USB flash drive, click Format first and then write, otherwise, click Write directly, wait for the writing to complete, you can close the software, at this time, the startup disk is completed.

    5. After setting up according to the operation, restart, and enter the U disk to restart.

    6. Boot F2 (different computers, see instructions) Enter BIOS - select "Hard Disk Drives" under the "Boot" menu - set "1stDrive" to your USB flash drive - return.

    How to reinstall ASUS ASUSX515.

    Hello, dear, it's a notebook. Yes. ok

    Steps to reinstall the ASUS laptop system.

    1. Preparation before reinstalling the system: 1. At least 4G size U disk 2, ultraiso floppy disk pass 3, system installation image (recommended to Doudou system** latest version) 2, ASUS laptop reinstall win7 win8 system installation tutorial: 1, start the software with administrator privileges ultraiso2, find the location of your installation image in the local directory of the open interface3, double-click the installation image, and the detailed details will pop up4. In the menu of Chaos Honghe, click Boot-Write Hard Drive Image, open the interface, and select the USB flash drive you want to use as the boot disk.

    If there is something in the out-of-draft U disk, click Format first and then write, otherwise, click Write directly, wait for the writing to be completed, you can close the software, this uproar, the boot disk will be completed5, after the operation is set up, restart, you will enter the U disk to restart 6, boot F2 (different computers, see the instructions) Enter the BIOS - select "Hard Disk Drives" under the "Boot" menu - set "1stDrive" to your U disk - return.

    How do you divide the plate when you press F2 when you boot up?

    ASUS Laptop Remount I can't find where that disk is.

    Hello dear, you need to prepare this plate yourself.

    How to get this plate.

    Hello dear, you can go to the mobile phone store to buy one.

  4. Anonymous users2024-02-04

    Preparation before installing the system:

    g a USB flash drive and make a good startup program;

    The steps to reinstall the system are as follows:

    2. When the boot screen appears in the notebook, press the ESC key, press enter after moving to the USB flash drive, and select Start from the USB flash drive;

    3. After choosing to boot from the U disk, entering PE will appear as shown in the figure below. Move the up and down keys to select the first one and press enter;

    4. Press the Enter key to enter the following PE interface, and an automatic ghost box will automatically pop up;

    5. Select the system that is copied in the USB flash drive, and then click OK after selecting to install the system on the C disk;

    6. After confirmation, wait for the progress bar to be full, and then shut down and restart.

  5. Anonymous users2024-02-03

    1. Pre-installed genuine Windows system, you can restore the system by pressing F9 at boot;

    2. You can also install the system by yourself;

    3. F9 to restore the system or install the system yourself, you can refer to:

    Or call ASUS Customer Service**400-600-6655 to speak with an engineer to help you solve your problem!

  6. Anonymous users2024-02-02

    The first is to put the disc into the optical drive,When booting up,Choose to start from the optical drive,You can enter the system interface,Mainly how to choose to start from the optical drive,Different models of computers,Enter the different keys for startup selection,Generally when booting up,There will be a prompt in the lower left corner,Press which key can enter the BIOS option and boot option,Generally the key behind the prompt,Just press it quickly,The speed has not caught up,Wait for the boot and restart again,After entering the boot option, Press the up and down buttons to select the optical drive, and then press the OK button to enter the system interface.

    What do you think of the leftovers?

  7. Anonymous users2024-02-01

    Hello! 1. Startup items, press the ESC key when booting up, and generally directly select the non-UEFI startup item to start.

    2. How to install Recover System Detailed Tutorial:

    3. X550C or X550V can install Windows7 or Windows8 64-bit system, and driver support is provided.

Related questions
19 answers2024-03-26

First use the recovery *** asustek computer inc :*** system recovery disk to restore the system, and then use the notebook series support CD: the missing drivers of the system to install all the drivers. >>>More

18 answers2024-03-26

Dear ASUS users, Hello!

Generally, it won't be installed.,What system is best installed on the driver in the system provided by the official website.,Or can't reinstall the system.,Try again.。 >>>More

15 answers2024-03-26

The system installation generally defaults to the C disk,D disk as long as the data inside is not formatted, it is still retained,Of course, it is best to back up the data with a USB flash drive before reinstallation。

4 answers2024-03-26

System BSOD issue caused by memory incompatibility! It is recommended that the landlord check what kind of memory model his machine is suitable for, and then buy the corresponding memory.

6 answers2024-03-26

Hello, the factory reset method is as follows:

1. Before booting into the system, press F8 to enter the advanced boot options of Windows 7 and select "Repair Computer". >>>More