How to change the network port settings, how to change the network connection port of the computer

It's routing, right? How is it possible for a cat to take four mouths?

That's why the internet speed is so slow!

You can also limit the speed of the network in the route! Minor issues.

1. Find My Computer on the desktop, right-click, select Properties, the System Properties dialog box appears, and select the hardware.

2. Select the "Device Manager" option in the hardware dialog box that appears to enter the next dialog box.

3. Select the "Port" option in the "Device Manager" dialog box, select the port you want to connect to the external device in the drop-down menu, and double-click to select it.

4. Fourth, assuming that you want to modify the port, enter the "Properties" interface, select the port settings, and click OK.

5. Select "Advanced" in the "Port Settings" option and click OK.

6. Enter the "Advanced Settings Interface", select the port number you want to set the corresponding external device in the drop-down menu of "Port Number on com", and click OK.

7. After setting the port number, return to the "Device Manager" window and find that the port number has not changed, at this time, you can double-click the right mouse button in the blank space and select "Scan Detection Hardware Changes (A)" in the drop-down menu.

Steps to change the COM interface on the motherboard to the network port:

1 Open the Device Management Trapper, right-click the computer icon on the desktop to find the Device Manager, and click to open.

2 Find the corresponding COM port, find the port (COM and LPT) in the device manager, and click + to find the current COM port.

3 Locate the port settings for the port properties.

4. Find Advanced in Port Settings.

5 In the advanced settings, you will see the drop-down menu for the setting of the com port number.

6 After clicking Change, you can make sure that Wang Yukai has returned, if there is no change, you can click the scan detection hardware driver in the toolbar.

Computer slippery ports usually don't need to be changed manually. If you need to change the port used by a program or service, you can refer to the documentation or manual for that program or service to learn how to configure the port. In some cases, the port can also be changed in the firewall settings of the operating system.

However, please note that changing the port may affect the stability and security of your application, so you should exercise caution and back up important data.

1. Open the "Control Panel" on the desktop.

2. Go to "Devices and Printers".

3. Select the printer connected to the computer, right-click on the virtual bird, and select "Printer Properties".

4. Switch to the "Ports" window.

5. Click "Configure Port" to change the IP address and port number.

6. In the port window of the printer, you can add or remove ports, that is, the difference can be early.

Summary. Hello dear.

1.Set the IP address of your computer to get it automatically.

2.Open the Internet Explorer, enter or in the address bar, and enter the default value Admin admin. in the username and password box that pops up

3.Once you enter the router settings interface, click "Network Parameters" > "LAN Port Settings" in the left menu bar.4On the LAN port settings screen on the right, change the IP address to the desired CIDR block, for example, subnet mask.

5.When the modification is complete, click SaveUsually, the router will prompt whether to reboot at this point, just click "Yes".

How do I change the network port?

Hello pro 1Set the IP address of your computer to get it automatically. 2.

Open the Pi Potato IE browser, enter OR in the address bar, and then enter the default value admin in the pop-up username and password box After entering the router settings interface, click "Network Parameters" > "LAN Port Settings" in the left menu bar 4On the LAN port setting screen on the right, change the IP address to the desired CIDR block, for example, if the subnet mask is modified, click SaveUsually, the router will prompt you whether to reboot at this time, just click "Yes".

6.The previous 5 steps are only for router setup. If you want Zheng Youjie to log in to the router's web interface at this time, you cannot use login. Instead, you should set the IP address range of your local computer to Yes.

The steps to solve the problem are as follows:

1. Take it as an example, it's not too spring to enter the tomcat installation directory, and the file "installation directory can be opened with notepad").

2. Find and modify the port number in the file in turn.

3. Find and modify in turn in the file, and modify it as:

4. , modified as:

5. The trillion is amended as:

6. Start tomcat and visit http: localhost:8081; If it can be accessed successfully, it means that the modification is successful (the port accessed is based on the connector port set in the configuration file).