How much does iphone6sp cost to change the screen and home button home button fingerprint is availa

Mine only changed more than two hundred.

By exchange!! Don't change !! There's a way to test it for yourself!

1: Turn off your phone (important step, don't forget to turn it off).

2: Take out an alcohol cotton ball with tweezers and press it on the home button of your iPhone, don't press hard for the time being. The iPhone is at a 45-degree angle to the ground, with the Home button below and the earpiece above (this step ensures that the alcohol does not enter the screen).

3: Wipe the alcohol cotton ball back and forth along the edge of the home, and press the home back and forth to wipe it with the tweezers while holding the alcohol cotton ball firmly to let the alcohol seep out. Wipe about 10 times, remove the alcohol cotton ball, press the home button with your phone, and continue for about 20.

4: Do it again as in step 3. Wipe 5 times and press home10 times or so.

After the 4th step is completed, you will obviously notice that there is no crisp key sound when pressing the home button, then this step is complete. If the sound of pressing the home button is still crisp after step 4 is completed, then continue with step 4 until there is no crisp key sound. ）

5: Once that's all that's done, there's a long wait. (Note: Place the phone diagonally on the desktop, with the home on the bottom and the earpiece on the top, which must be done.) )

6: Press the home button about 10 times every hour for 3 hours, when the crisp key sound of pressing the home button rings again, it is when you turn on the phone. (alcohol volatilization).

7: Power on. Usually this is fine, unless it is broken. If you have to change it, it will cost about 1,000 yuan. However, it is still recommended to ** a startup software such as a multi-to-many launcher, which can do a lot of things in the notification bar, and the home button is ...... to press a few times less and live a few more times

A general copy

The repair point only costs a few dozen dollars.

The home button of the iphone6plus is more troublesome to replace because it is fingerprint recognized.

If it is man-made damage, it will be about 1000 to the official replacement, and if it is not man-made, it will be repaired free of charge after sale.

If you are insured, you can also go to a small shop outside to change,**Not necessarily, there are dozens or hundreds, which will be much cheaper than the official.

If it is the home button to change the copy, it will be attacked after the sale.

It's about 1000+, because it's related to fingerprint recognition and fingerprint information security, so it's very expensive.

Change it outside, it depends on the business, there are cheap, there are expensive, it may not be easy to use after the change, if you have a strong ability to do it yourself, buy it in x treasure, change it yourself, it will be twenty or thirty, but it may not be easy to use after changing.

No need to change!! Don't copy for !! There is a way to test it effectively!

1: Turn off the DU of the phone

Important step, zhi must not forget to shut down).

2: Take out a piece of alcohol DAO cotton ball with tweezers and press it on the home button of your iPhone, don't press hard for the time being. The iPhone is at a 45-degree angle to the ground, with the Home button below and the earpiece above (this step ensures that the alcohol does not enter the screen).

iPhone6Plus's home button is DU for BAI fingerprint recognition, and the fingerprint cable also needs to be changed.

zhi so the exchange of dao back is more expensive, man-made damage, the version of the official change of the right of about 1000, if not artificial, to the after-sales free.

You can also go to a small shop outside to change,**Not necessarily, there are hundreds, and it will be cheaper than the official.

The home button of the iPhone after the iPhone 5s is Touch

id，touch

ID can't be replaced, if your phone is broken, now while it's still under warranty to find an official repair.

The iphone6home button is not man-made damage, whether it is replaced free of charge, depends on whether it is under warranty.

1. During the 1-year warranty period, whether it is a home button problem or a touchid problem, once the non-human damage is detected, Apple will generously replace the official machine, or repair, according to the current situation, direct replacement is more common.

2. During the 1-year warranty period, the official machine has been replaced once, whether it is the home button problem or the touchid problem, due to the introduction of Apple's new warranty policy, it is very likely to become repairable as much as possible, and the warranty period will not be recalculated.

3. After the warranty period, you can only pay for it yourself. About 200 yuan.

First of all, Apple's home button failure must be replaced, and it costs 50 yuan to replace it after sale. Replacement is free of charge during the warranty period.

Because it is fingerprint recognition, the fingerprint cable also has to be replaced, so it is more expensive, man-made damage, the official replacement is about 1000, if it is not artificial, go to the after-sales service for free to see the return to the original factory or go to the mobile phone repair to repair together, the original factory is more expensive, and the mobile phone repair street is about 200.

Simple home button problems, such as unsatisfactory rebound effect; You can directly replace the home button gasket, and there is no TouchID part involved.

The home button module is damaged, for example, it doesn't respond when pressed, and the cable is broken, so you can only find Apple for repair.

The home button is used normally, the touchid does not respond, the fingerprint function is lost, and you can only find Apple for repair.

If you ask for maintenance, fingerprints can't be used.

I dropped a 100 yuan and 100 dollars on the road, and I should have picked up that one.

A five-pointed star screwdriver, tweezers, boot piece or fingernails are required.

Here's how: 1. Unscrew the screws with a five-pointed star screwdriver.

2. With forceps that are bent downward, push downward. Gently pry upwards. Once there is an opening, use your fingernails or a crowbar to slowly cut around it.

3. Note the order of the screws here. Because there is a screw here that is not magnetic.

4. Observe the position and number of all screws. Remember who pressed the baffle on whom.

5. It is recommended to disassemble from the top first. Remove the bezel of the camera and slowly remove the power strip. It's worth noting that note the order of the lines on the left.

6. Remove the home button bezel and slowly tear off the home button cable. Note that you also need to tear off the cables that link the screens!

We replaced the Apple 6 screen assembly, and that's the end of it. Then it is recommended to install it from bottom to top.

7Finally, it is still reminded that the front end of the screen is buttoned first, then the bottom of the screen, and finally the left and right screen edges.

Method steps.

Unscrew the screws with a five-pointed star screwdriver.

With forceps bent downward, push downwards. Gently pry upwards. Once there is an opening, use your fingernails or a spudger to slowly scratch around (the same as the previous Apple 5 Broken Screen Replacement Screen** tutorial.)

Note the order of the screws here. Because there is a screw here that is not magnetic.

Observe the position and number of all screws. Remember who pressed the baffle on whom.

It is recommended to remove it from the top first. Remove the bezel of the camera and slowly remove the power strip. It's worth noting that note the order of the lines on the left.

Remove the home button bezel and slowly tear off the home button cable. Note that you also need to tear off the cables that link the screens!

We replaced the Apple 6 screen assembly, and that's the end of it. Then it is recommended to install it from bottom to top.

Finally, it is still reminded that the front of the screen is buttoned first, then the bottom of the screen, and finally the left and right screen edges.

Precautions. Pay attention to the screen touch, display, camera cable order.

After tearing off the home cable, you have to tear off the cable that connects to the screen, don't forget it.

Snap on the screen, front end, back bottom end, and finally both sides. Don't be reckless brute force,

There are several cases:

1. Change the home button without fingerprint unlocking, and you can spend dozens of dollars.

2. There is a warranty, about 60 to 80.

3. There is no warranty, and if you seriously change the motherboard, it will cost hundreds of dollars.

There are three possible problems with the home button malfunctioning:

1. Home cable (excluding the buttons on the surface);

2.tail plug line;

3.Motherboard menu key L line.

It is recommended to send the mobile phone to the nearest service center for testing, and the service center will determine the specific problems, accessories and other hidden faults of the mobile phone according to the test results, and give specific accessories and repair costs**.

In addition, the official ** is definitely more expensive than the unofficial one, but although the unofficial is relatively cheap, the fingerprint may not be used after replacement.

So the specific cost, you can go to the official to detect the **problem**, ask**, if you think the cost is high, go to the unofficial, but remember to ask if the fingerprint can be used normally after replacement.

Apple 6s home button failure solution:

In this way, the home button has been readjusted in the system and can be used as before.

2. Connect the external power supply to your iPhone, press and hold the Home button until the voice interface appears, and then remove the external power supply. The home button was resurrected immediately, and it was as sensitive as the one I just bought.

Is there a warranty, if there is no warranty, if you want to use the fingerprint function, it will be expensive, because you have to change the motherboard at the same time,。。 It doesn't matter if the fingerprint function is not available. That's cheap, a few dozen dollars is enough.

Hello! iPhone's Home with Touch ID** is not low.

The appearance of 60-80 is slightly different from one repair point**.

1. The home button can be replaced, and it is about 50 yuan to change it after sale.

2. Because iPhone6 has fingerprint recognition function, if you replace the home button, you need to replace it with the screen, and the specific cost can be determined by contacting the manufacturer's after-sales service.

The iPhone 6 Plus is a smartphone launched by Apple on September 10, 2014 Beijing time. The iPhone 6 Plus uses an inch screen, making it the largest screen phone in Apple's history. The iPhone 6 Plus was launched in Chinese mainland on October 17, 2014.

It is recommended to turn on Assistive Touch in the settings after changing the Home button, and the Home button will not be damaged in the future.

You can also turn on the emergency now.

If you change it, you won't need fingerprint recognition.