What is the importance of tiling in the bathroom?

In order to avoid unnecessary trouble later, there are also bathrooms in addition to paving floor tiles The wall should also use tiles, because this is to prevent water from directly touching the wall, which is also a kind of protection for the wall.

The bathroom is tiled, and it is necessary to ensure that the cement is covered behind each tile. It will be beneficial for drilling holes in the tiles or smashing heavy objects on the tiles in the later stage. The waterproofing and beautiful seams between the tiles of the bathroom must be done.

To buy non-slip tiles. Bathroom tiles need to be purchased non-slip tiles to prevent accidental slipping during the bath.

Bathroom tiles, do pay attention to it, do not pave those bright and smooth tiles, because the bathroom is more humid and easy to slip, so to install non-slip bricks, the choice of tiles can be carried out according to the volume of the bathroom, it is best to choose small pieces not too big.

You need to choose a better quality, must be non-slip, so that you can better use, choose the most expensive, glazed tile.

If the bathroom is tiled, it is still particular, because the bathroom is a place we often use, and there are water stains, so we should choose non-slip.

must be non-slip, only to make, expensive glazed tiles.

1. The wall tiles of the bathroom must be pressed against the floor tiles. To put it simply, it is necessary to pave the wall in the decoration of the bathroom, stop and leave it empty at about 30 centimeters from the ground, and then pave the ground, and finally finish paving the empty wall, so that the bathroom paving process not only makes the bathroom more beautiful, but also more effective drainage and waterproofing.

2. When paving tiles in the bathroom, you should also pay attention to the pattern or texture of the tiles, and you must follow the direction of the texture and do not stick it down.

3. In order to avoid the bathroom tiles falling off and bringing hidden dangers to the future home life, be sure to check whether the wall is smooth and whether there are cracks before paving.

4. Hook joints, we all know that when paving the wall or ground, there should be gaps between the tiles, and the hook joints must pay attention to the timing problem. You can't just finish the paving to go to the joints, you should choose a high-quality material, and then carry out it after the tile is relatively stable and will not loosen.

5. In order to pursue the beauty of the bathroom, many people will choose tiles or set up a waist line, and then they must have a certain understanding of color matching. In general, it will be selected according to the overall decoration of the family, and you can choose dark and light colors in color matching, similar color matching, or color matching of the same color, if you want to pursue individuality, then you can make a bold choice.

6. After the bathroom tile is paved, do not move around immediately, in addition, it is necessary to check carefully, if there is a hollow drum place, it is best to re-pave, the wall or floor tile pattern is clear, the hook joint is relatively smooth and flat, there are no cracks, damage and other phenomena before the real paving is completed, so as to ensure the effect of decoration and bring convenience to the home life after that.

<> "Sanitary nuclear lead room tile paving, there is no need to pursue the wall and the floor too much!

The steps of wall pressing and paving.

Step 1: Vacate a row of wall tiles at the bottom, and start paving from the second piece, which needs to be leveled and difficult to construct.

Step 1: Lay the floor tiles.

Step 1: Lay the last row of wall tiles and press them on top of the floor tiles, which need to be cut at an angle to the ground.

Ground pressure wall paving steps.

Step 1: Lay the wall tiles first, from the bottom to the top, easy to operate.

Step 1: After the wall tiles are laid, lay the floor tiles.

1. Change the floor tiles to press the edge of the wall tiles, commonly known as "ground pressing the wall"; 2. The wall brick presses the edge of the floor tile, commonly known as "wall pressing the ground".

It is generally accepted that it is better for walls to be pressed against the ground than to be pressed against the ground, but the specific benefits are mythologized. Some say it is waterproof, some say it prevents water accumulation, and some say that it has a good drainage effect.

It seems that with the wall tiles and floor tiles, the water problem in the entire bathroom can be solved. But after a closer look at the process, it was found that the wall pressing the floor is not so magical. If you want to talk about the benefits, there is probably only one good-looking!

First of all, we need to know that whether it is a wall tile or a floor tile, next to the most edge of the brick, there will definitely be a big gap. This gap is to prevent the newly laid tiles from squeezing each other due to thermal expansion and cold contraction, resulting in falling off or even damage. Sakura.

The floor pressure wall has a seam facing the sky, and the seam of the floor tile is perpendicular to the ground. The wall is pressed to the ground, there is a joint towards the wall (my own name), the joint of the wall tile is parallel to the ground, unless we lie on the ground, otherwise this joint will be blocked by the wall brick, which is more beautiful. But ah but!

Now it doesn't matter what the big crack is! We all have to do beautiful sewing! It's all waterproof!

And if the bathroom waterproofing is not done well, such a seam will not help in either direction! The wall pressing the ground is more complicated than the ground pressing the wall, and the general decoration workers ask for additional money, so everyone considers it in combination with their own wallets - after all, this kind of construction is not necessary.

1. The choice of color is based on the area of the bathroom, the area is small, and the color is as light as possible, which can achieve a bright and spacious visual effect, such as vitrified tiles; The medium-sized area can choose warm colors, or cold colors can also be destroyed by reeds; The area is very large, and you can use dark colors with some light-colored waistlines, which is beautiful and atmospheric.

2. Don't choose a large tile specification, the bathroom space is limited, there are generally many corners, and waste can be reduced when cutting, and the common specifications are 300mm*300mm, 330*330mm, etc.

3. Choose one with low water absorption, and the bathroom is generally more humid, so it is not easy to affect the tiles.

4. Corrosion-resistant, wear-resistant and dirt-resistant tiles, because the bathroom is often used, confined space, and the environment is humid, it is easier to breed bacteria, and this kind of tile is easy to take care of, like glazed tiles, glass tiles, etc.

5. The texture of the ceramic tile should be as anti-slip as possible, such as the accompanying body brick, glazed brick, etc.

6. Try to choose ceramic tiles with higher hardness and density, which is not easy to hide dirt.

1. Slip resistance.

The bathroom is a place that is in contact with more water, you need to pay attention to waterproofing, there are elderly people and children at home, the non-slip property of the tile is very important, so when we buy bathroom tiles, we can stand up and walk, observe whether there is a feeling of friction, if there is a feeling of friction, the anti-slip of the tile is good.

2. Water absorption.

When the bathroom is in contact with water, the whole tile in good condition almost does not absorb water; We can carry out a drip test to see if the tile absorbs water, the absorbent tile is easy to corrode, and the ground will regain moisture after a long time.

Hello dear, the choice of what floor tile chain should be hidden in the bathroom should take into account factors such as non-slip, wear-resistant, and easy to clean. 1.Slip resistance:

Since the bathroom is relatively humid and the floor is susceptible to moisture, it is important to consider its non-slip performance when choosing floor tiles. It is recommended to choose a floor tile material with a good anti-slip effect, such as ceramic tiles or glazed tiles, and avoid choosing smooth brick surfaces. 2.

Abrasion resistance: The floor of the bathroom is used frequently, and it is necessary to choose floor tiles with good wear resistance to ensure that they are not deformed and damaged for a long time. 3.

Ease of cleaning: Since the floor of the bathroom is easily contaminated by stains and is prone to moisture, it is important to choose an easy-to-clean floor tile material. It is recommended to choose tiles that are easy to clean, waterproof, and corrosion-resistant.

4.Water resistance: The bathroom itself is a humid environment, therefore, the floor tiles in the hygienic room should choose materials with good water resistance, such as tiles, granite, etc., to ensure that long-term use will not be damp.

According to the above factors, it is recommended to choose glazed tiles or porcelain tiles for laying. These two types of floor tiles have good anti-slip effect, wear resistance, easy cleaning, and relatively strong water resistance. In addition, when choosing floor tiles, it is also necessary to take into account their color and pattern to adapt to the decoration style of the entire bathroom.

However, the choice of bathroom floor tiles still depends on personal preferences and actual needs, and the choice is made in combination with the actual situation.

Summary. Hello, dear. Bathrooms are paved with non-slip floor tiles.

The bathroom floor tile selection method is as follows; anti-slip considerations; The bathroom is a bathing space, and the floor will be relatively humid, especially the floor tiles in the shower room. Therefore, it is recommended to choose a good anti-slip effect for the floor tiles in the bathroom to avoid slipping on the soles of the feet when taking a bath, causing potential safety hazards. Smooth drainage; The bathroom is used as a bathing space, and after each bath, the water on the ground should be allowed to flow away as soon as possible and kept dry to avoid moisture breeding bacteria; Therefore, do not choose the floor tiles in the bathroom, and do not choose small holes on the surface, these uneven floor tiles will have water accumulation if the drainage effect is not good.

Hello, dear. Bathrooms are paved with non-slip floor tiles. The bathroom floor tile selection method is as follows; anti-slip considerations; The bathroom is a careful space for bathing, and the floor will be relatively humid, especially the floor tiles in the shower room.

Therefore, it is recommended to choose a good anti-slip effect for the floor tiles in the bathroom to avoid slipping on the soles of the feet when taking a bath, causing potential safety hazards. Smooth drainage; The bathroom is used as a bathing space, and after each bath, the water on the ground should be allowed to flow away as soon as possible and kept dry to avoid moisture breeding bacteria; Therefore, the floor tiles of the bathroom, do not choose small holes on the surface, these uneven floor tiles, the drainage effect is wide, and there will be water accumulation.

Kissing, dirt-resistant and easy to care for; There are two dirt in the bathroom, one is hair and the other is yellowish dirt, so when choosing floor tiles, it is also necessary to consider the problem of dirt resistance and care. Generally speaking, light gray is a more dirt-resistant choice, the hair is not obvious, and the key mountain is not too eye-catching if it is a little dirty. gray matt bricks; Gray is a simple and generous, practical and dirt-resistant floor tile color, the effect is more versatile, and it is also more suitable for use on the bathroom floor; At the same time, if the draft takes into account factors such as the anti-slip effect of only jujube, the choice of gray matte brick for the bathroom floor is a more common solution.

kissing, and messing up light brown vintage bricks; Light brown and light yellow are a more dirt-resistant floor tile color, this kind of floor tile is more common in the traditional decoration style oak lattice, and now many hardcover rooms are the standard configuration, generally this color of floor tiles.

First, choose tiles with low water absorption, generally speaking, high-quality tiles have very low water absorption, so that they can dry quickly. If the tile does not indicate the water absorption, you can use tea or water droplets on the back of the tile, and check the diffusion degree of the water droplets after a few minutes. Tiles with high water absorption rate will be cracked on the surface of the tiles and peeling off the entire wall and floor tiles after thermal expansion and contraction.

Second, choose a tile with high density, when buying tiles, you can observe from the side whether the brick surface is smooth and whether there are pinholes of uneven thickness. At the same time, you can tap the tile to listen to whether the sound is crisp, the more brittle the sound, the higher the texture density of the tile, the better the hardness. Such tiles are laid into the bathroom space, which is not easy to damage and easy to maintain and clean.

Clause. 3. If you choose dry and wet decoration: that is, the separation of the shower area from the toilet and basin area. Through different tile materials and color varieties, a good division can be achieved, so that the two do not interfere with each other, and avoid the embarrassment of splashing and wiping after bathing.

This is a more common decoration method in foreign countries.

The frequency of use of the bathroom is very high, and it is best to lay non-slip and easy-to-care tiles, so that the tiles can be non-slip and clean.

Considering that there will be stagnant water on the ground, the bathroom must consider non-slip when laying floor tiles, followed by dirt resistance.

The bathroom is better to pave iron anti-slip tiles, because there is a lot of water in the bathroom, if the tiles are not non-slip, it is easy to slip and fall, especially the elderly and children, so the bathroom tiles must pay attention to non-slip.

Bathrooms are tiled.

It should be the need for the bathroom first.

Wear-resistant and non-slip. Impermeable looks fresh and clean.

Easy to clean. and so on first.

I think it is better to pave the bathroom with Dongpeng tiles, Dongpeng's tiles are a very famous brand, and its tile quality is very good, and the variety of colors is very good.

In fact, decorating a house is a comprehensive thing, it has to combine all aspects, such as your preferences, your income, and so on. You can't blindly listen to other people's introductions, after all, what suits you is the best.

What kind of tiles are good for the bathroom? It depends on the size of your bathroom, if the bathroom is relatively large, you can choose a larger size of tiles, so that it feels atmospheric and graded, if the bathroom is smaller, appropriately choose smaller specifications of tiles, so that it is more economical, low cost, specific colors and brands can be selected according to their own preferences.

The bathroom area is humid and full of moisture, so you need to choose tiles with good waterproof effect;

Because the floor tiles in the bathroom are damp, it is easy to cause people to slide and cause injury, so it is necessary to choose non-slip and wear-resistant full-body bricks;

The bathroom also pays attention to its aesthetics, and chooses glazed tiles with better anti-fouling ability to make wall tiles, which are shiny and richly patterned.