-
Anonymous users2024-02-07Hare clips are generally 14cm in size.
1. The hare clip has just been bought to deal with it, that is, the edges and corners along the edge of the teeth are rounded with a frustration knife to prevent the edges and corners from being like knives when clamping the prey, and the rabbit's feet will be clamped off and run away.
2. The wire rope and the clamp should be connected with a rotor, which is to prevent the prey from rotating after clamping, and the wire will be twisted off and run away, and the rotor can be made with a 3-inch iron nail. Put the clip is generally chosen on the path that few people walk, in the wasteland, you can find the rabbit road, there is fresh rabbit feces.
place. 3. When putting the clamp, you should dig a pit, large and small, the size of the clip is not higher than the road surface in the pit, it can be a little deeper, open the clamp after the pit is dug, the clip should be placed horizontally, and the pedal should be placed lower, so that it can be clamped deeper.
4. Fix the wire rope on the clip first, and then cover the clip with leaves or vegetable leaves, do not use paper, it is easy to get wet, and then cover the leaves with a thin layer of fine soil, no stones or branches, otherwise the clip will not be closed. Once the clamps are placed, place a small branch on each end of the clip.
5. Therefore, looking for the footprints of the hare should be found on the slope, the hare only walks downhill on the slope, will not go in a straight line, come out of the nest, and like to go back on the old road.
-
Anonymous users2024-02-06Buy rabbit clips at**.
-
Anonymous users2024-02-05Dear, hello, there are five ways to 1, put the clamp to dig a pit, big up and small down, the size of the clip in the pit is not high above the road, but can not fall down as well, the depth of the pit is a little more than a fist. 2. The depth of a clamp, in general, the pit is deeper than shallow, and the pit is dug to open the clip. 3. The clamp should be placed horizontally, and the pedal should be placed lower, lower than the plane of the clip, so that it can be clamped a little deeper, and the wire rope on the clamp should be fixed first.
4. Then cover the clips with leaves or vegetable leaves, do not use paper, it is easy to get wet, and then cover the leaves with a thin layer of fine soil. 5. There can be no stones or branches, otherwise the clips can't be closed, after putting the clips, put a small branch at each end of the clip, and then block it if the road is too wide.
-
Anonymous users2024-02-04The usage of the hare clip is that after the hare clip is opened, there is an iron wire in the middle to line it on both sides. Under the clamp to catch the hare, the clamp is mainly to see the rabbit road, generally early in the morning to see the clearest, generally early in the morning to collect the prey, after the dawn to find the rabbit road, and then make up the clip, the day before the good harvest also do not accept it.
How to place the hare trapWhen putting the hare clip, you have to dig a pit, big up and small down, the size of the hare clip is not higher than the road in the pit, but it can't fall down, the depth of the pit is a fist a little more, and the depth of a hare clip. After the pit is dug, open the hare clip, the hare clip is placed horizontally, and the pedal is placed a little lower, lower than the plane of the hare clip, so that it can be clamped a little deeper.
Fix the wire rope on the hare clip first, and then cover the hare clip with leaves or vegetable leaves. Don't use paper, it's easy to get wet. Cover the leaves with a thin layer of fine soil, and there must be no stones or branches, otherwise the hare will not be able to clamp together.
Place a small branch at each end of the hare clip, and if the road is too wide, it can be blocked.
-
Anonymous users2024-02-03Put iron clips on the road that rabbits often walk.
1. The hare loves to take the old road, that is, the way back, as long as you find the road that the hare has walked, you put the clip on the road it has walked, and it will definitely be clipped. The hare thinks that the path it has traveled is safe, and it will go back and forth that way.
Second, hares love to dig new soil. The hare comes out at night to feed, and the place where it moves all night is very large, and its characteristic is that it loves to dig new soil, and when it sees a place with new soil, it will jump up.
3. We put the clips, don't cover the grass on the clips, cover them with a thin layer of fine soil, and make them fresh.
It is likely that after the birth of the rabbit, people or other animals have come into contact with the rabbit, so that the rabbit has the smell of a person or another animal (this smell can be recognized by the mother rabbit). When the mother rabbit saw the rabbit again, due to the change in smell, the mother rabbit did not know her child anymore and mistakenly thought that the rabbit was an intruder. As an instinctive reaction, the mother rabbit will fight desperately with the "invaders" to protect her child. >>>More
The jacketed heat exchanger is a kind of intermural heat exchanger, which is made by installing a jacket on the outer wall of the vessel, and has a simple structure; However, its heating surface is limited by the wall surface of the container, and the heat transfer coefficient. >>>More
In China, the traditional methods mainly include: bus duct, distribution box, pre-branch cable, groove and wedge clamp, etc., while the insulation piercing clamp is a new cable branch method after the pre-branch cable, which has been widely used in developed countries such as Europe and the United States, and has been running safely and stably on the lines for more than 30 years. >>>More
Whether the hair is soft and shiny.
If the rabbit gets sick, it will lose its hair! >>>More
In addition to Timothy grass, suspend other foods first, and wait for the intestines to recover a little before adding rabbit food.