-
The 691 error indicating that the broadband cannot be connected is caused by the inconsistency between the broadband password input and the application. Main content: Error 691 Causes of occurrence:
1) Network fee arrears, ADSL broadband will appear 691 error when arrears 2) **Arrears, many broadband networks are bound with **, if **card arrears, the network will also appear 691 error 3) Username and password error, there will also be 691 error 4) MAC address error 5) After the system is reinstalled, there will also be 691 error, you can add [China Telecom Guizhou Customer Service] WeChat *** through WeChat, select"I" can provide faults. Check your progress related services. We will provide the most professional treatment plan for the test results.
Customer service 21 will answer for you. Broadband service can be self-service troubleshooting, simple and easy to operate, in addition to work order inquiry, ITV repair, broadband application and password service, convenient and fast, more functions please pay attention to China Telecom Guizhou customer service.
-
Error 691 is not just a mistake in the username and password, any item that cannot be verified in the operator's billing authentication system will be reported as error 691, and the possible reasons are as follows:
1. The username and password are incorrect.
2. Abnormal fees.
3. Bind the MAC address.
4. There is an error with CHAP and other protocols on the computer.
5. Hang up. (A start packet is sent to the server every time a dial-up is made, and a stop packet is sent when the request is interrupted.) If it's an abnormal operation.
For example, power outages and the like, this stop packet can't be sent, at this time your computer has been disconnected, but the server still thinks your **, so it can't be dialed. )
6. The operator's IP address pool is full, and there are no extra addresses assigned to you.
Broadband connection is a relative way of describing the continuation of the number or the electronic line containing or being able to handle a wide range of frequencies at the same time, and the larger the frequency range, that is, the higher the bandwidth, the relatively higher the transmission of data. It is bounded by the upper limit of 56kbps for dial-up Internet speed, and is called lower than 56kbps"Narrow band", which is called above"Broadband"。For home users, it means that the transmission rate exceeds 1m, which can meet the needs of a large amount of information transmission such as voice and image.
Including fiber, XDSL (ADSL, HDSL), ISDN, etc.
-
Small u live broadcast room official dry goods, how to solve broadband error 691
-
It may be that the number has been stolen, call 10000 and ask customer service to help you reset the password. After reset, this software dialupass Chinese version can not be connected to the time through this to see the password。
-
You're using the Starry Sky Extreme client, right?
Set up a broadband connection again.
If the broadband Internet shows the fault of "error 711", it is caused by the computer using the win7 system and updating the system patch KB917606. You can do this in the following ways: >>>More
1. First confirm that the adsl modem dialing is normal, because the IP automatically obtained by the network card is not cleared, so the network card cannot get the new IP address when dialing again, the operation method is: turn off the adsl modem, enter the network connection of the control panel and right-click the local connection to select disable, right-click the local connection to select enable after 5 seconds, and then turn on the adsl modem dial-up; 2. If the first step is invalid, then in the case of turning off ADSL MODEM, still disable the local connection (network card), restart the computer, then start the local connection (NET CARD), and then turn on ADSL MODEM to solve the problem; 3. If the above steps can not be solved, check whether the network card light is on, if the network card light is not on, refer to the dispatch knowledge base: "the network card light is not lit or often does not light up" solution 4, if the network card light is normal 1, 2 steps can not be solved, then lead the user to uninstall the network card driver, reinstall the network card driver, if the user XP system according to: >>>More
1. Definition of Dialing Error:
Error 678 is one of the faults of broadband. The implication is that the remote computer is unresponsive. To put it simply, the network is not working. >>>More
Error 629, disconnected from the other computer.
Please double-click on this connection and try again. >>>More