The scanner fails to start Emergency The scanner starts successfully, right click on the scanner wit

Updated on technology 2024-03-26
5 answers
  1. Anonymous users2024-02-07

    Immediately after booting, press f8 and do not move to the advanced option appears in the let go, select "the latest correct configuration" enter to repair, and press f8 to enter.

    Safe mode. Restore the system or reinstall the system (if the reinstallation is also the case, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, and uninstall all the inappropriate things before the accident, or.

    Restore the system. Or reinstall, if your computer is win8, you can't enter the system is not able to enter the safe mode, only reinstall).

    In there is that the hardware is induced, deducted.

    Motherboard battery. Put it down, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

    If you can't reinstall it yourself, go to the maintenance there to find a repairer to help you. If you can't turn on the machine by any method, this is caused by a sudden shutdown, caused by disk damage, one is to deduct the motherboard battery and put it on for a while, and the other is to put it on for a period of time to try to turn it on, or you can't repair it.

    One is to leave it for half a day or a day and sometimes recover on its own, and the other is to reinstall the system.

    Just watch out for your own computer no.

    Card machine. Blue screen.

    Shut down suddenly, and it won't be like this when you turn it on.

  2. Anonymous users2024-02-06

    Hello, there is a scanner failure, it means that your printer scanner is not in the initial position, the tablet all-in-one machine (including the laser all-in-one machine is prone to scanner failure), it is recommended that you restart the printer twice, if you still can't restore the initial position, please replace the scanner (which component will emit light).Hope it helps.

  3. Anonymous users2024-02-05

    The scanner is connected to the computer to take a look, and I suspect that it is just a scanner problem!

  4. Anonymous users2024-02-04

    1. Turn on the computer, then win+r keys to open cmd, auspicious omen run input, open the service;

    2. Find the windowsimageacquisition(win) service, select the service point, right-click, and start;

    3. If it shows that the startup is successful, you can go to the device and printer to take a look, right-click the printer icon to scan the option, it should have come out.

    If it shows that the boot file is unsuccessful, "Failed to start, windowsimageacquisition(win) service error 1068 dependent service or group could not be started", then continue reading. WindowsImageAcquisition(Win) has 2 dependent service items CHD and RPC, checks the running status of RPC and CHD, and changes the startup type to manual. Right-click to turn on, try to start the WindowsImageAcquisition(Win) service, right-click to open the properties, and switch to "Dependencies".

    Enable all the system components that the service depends on, and there will be a scan option.

  5. Anonymous users2024-02-03

    The scanner starts successfully, right-click on the scanner without it.

    Hello dear [open Chong Zhaoxin], the scanner is successfully activated, right-click on the scanner and there is no scanner. You can give it a try, 1. First press "win+r"."key to open "cmd" to run, enter. 2. Open the service, then find the Windows Image Acquisition (WIA) service, select the service point, right-click, and click "Start".

    3. If the startup is successful, go to the device and printer, right-click the printer icon to scan and select the hunger clearance item, and the scanning option should have come out at this time. 4. If the startup is unsuccessful and cannot be started, prompt"Windows Image Acquisition (WIA) Service Error: 1068, Dependent Service or Group Failed to Start", continue with the next operation.

    5. Windows Image Acquisition (WIA) has 2 dependent service items, Shell Hardware Detection and Remote Procedure Call, check the running status of Remote Procedure Call (RPC) and Shel Hardware Detection, and change the boot type of these two items to "Manual"."。6. Then right-click "On", then try the Windows Image Acquisition (WIA) service, right-click the Windows Image Acquisition (WIA) service to open its properties, and switch to "Dependencies". 7. Enable all the system components that the service depends on, and there will be a scan option after the service is started.

Related questions
Mobile phone becomes scanner? How to use a mobile phone scanner
11 answers2024-03-26

In fact, it is to use the software to take a picture of the required file, and then form an electronic file of text.

How do I scan documents with a scanner?
19 answers2024-03-26

CamScanner can scan multiple pages into a file, is a software that scans various office documents and other documents, when we use it, we occasionally encounter problems, so, how to use CamScanner? Let's take a look at a small method below. >>>More

The computer does not detect scanner 10
10 answers2024-03-26

A: You can check it by following these steps:

1.Make sure that the power is turned on in the correct order. You should power on the scanner before you start the computer, or the system won't detect the scanner. >>>More

How to scan a paper document into a word document with a scanner (scanner HP laserJet 3052).
4 answers2024-03-26

1.First, install your scanner to your computer and install the scanner drivers. >>>More

How a scanner scans a document into an electronic document 5
12 answers2024-03-26

Scanners generally come with drivers and text recognition software, such as Shangshu and Chinese, which can recognize the scanned copy into reproducible text, but only if the scanned manuscript is a printed manuscript or a lead script, etc. How: >>>More