How to fix iPhone X after water gets in, can you clean it up by yourself?

Don't turn on this iPhone X after it gets into the water, it's best to test it, don't disassemble it yourself, after all, you can't be completely familiar with the removal method.

So the best thing is to take it to the after-sales service.

No, the structure inside the electronic product is very complex, and there is no way to clean it up by yourself, so you must send it to the after-sales maintenance personnel for cleaning.

Remove the battery as soon as the water enters, and then put it in flour or millet to dry and absorb the water.

Do not bake with a hair dryer or stove after turning off the phone immediately after water ingress, so as to avoid liquid being blown into the phone and the high temperature damaging the phone. It's best not to disassemble it yourself, after all, mobile phones are expensive and you're not a professional.

After the mobile phone enters the water, you should turn off the power in time, you clean up by yourself is to use a hair dryer to blow the water inlet part first, and then put it into the rice for 24 hours to let the rice fully absorb the water in your mobile phone, if you feel unsafe, you can go to the mobile phone store to repair it.

If you have strong hands-on skills. It is recommended that you can take the phone apart. And clean the water stains inside. And use the fan cool air stall for air drying.

If you have your own gadgets, you can also use a hair dryer to dry the inside of the phone after you take it apart.

Never turn off your phone after it gets into water. It's okay to clean it up after you get it.

The iPhone X is waterproof, and it is best not to wash it yourself after entering the water, because it is too precise.

A small amount of water inlet type: If there is not much water intake, but there is some water in the surrounding gaps, then you can wipe it with a paper towel after shutting down, and then use the hair dryer at home to blow it gently, and then put it on the paper towel to control the water, and put it in a ventilated place for a day or so. Pay attention to the hair dryer do not use hot air to blow, never use hot air, otherwise it is easy to burn the machine!

If there is a slight water ingress, you can use an electric fan or hair dryer to dry it in time.

You have a rice bucket at home, don't turn on the whole phone, don't move anything, remember to remember! Put the pestle into the bucket of rice, and then don't think about it, see you in a week. When you take it out again, see if you can turn it on. That's how I got my previous iPad, and now I use it normally.

The hair dryer is dry, it will be dismantled and blown, the amount of water inlet is not large, it is normal to enter the motherboard, if the motherboard is flooded, it will be troublesome, it can only be replaced, and it is necessary to check whether the battery contacts are also flooded, otherwise it is easy to bulge.

If it's only a short time into the water, it's fine, because** have a waterproof function, if it's a long time into the water or the water is relatively deep, you have to take it to the maintenance department.

This is not possible, if you disassemble it yourself, it will not be warranted. It is recommended to go to the after-sales service.

After the Apple mobile phone gets into the water, you can clean it up by yourself, that is, quickly turn off the mobile phone, and in the future, let it air dry naturally, and you can start it in the future.

How to deal with the water after the iPhone is ingressive.

1.Turn off the phone as soon as possible, cut off the power, and do not try to turn it on again to avoid causing a short circuit in the motherboard.

2.Remove the SIM card and use a tissue or cloth to remove water from the outside and crevices of the phone.

3.If there is light water ingress, you can wrap the phone with a paper towel, put it in a bag and put it in a small bag of desiccant.

4.The mobile phone cannot be turned on after entering the water, most of the chips such as the motherboard and CPU are short-circuited and burned, and it is recommended to send it to the after-sales service center for repair immediately.

Don't try the following wrong methods after your phone gets into water.

1.Don't shake your phone too hard. Because under the constant shaking, the liquid will swim inside the machine, and the moisture may enter deeper and burn the internal chip of the machine.

2.Don't use the hot air of a hair dryer to dry your phone for a long time. iPhones are now all metal bodies, and metal conducts heat easily, which will blow off the solder joints of the motherboard inside the machine, causing the motherboard to malfunction.

3.Do not attempt to charge a phone that has been flooded. An iPhone that gets into the water may have water stains inside, which can burn out the motherboard when it is powered on and cause a more serious failure.

4.Do not leave your phone in water for a long time. In the case that it cannot be used normally after two or three days after general treatment, it should be sent for repair immediately, and long-term placement will cause the motherboard to be corroded, or even unable to be repaired.

1. Do not move or shake the phone frequently after entering the water, so as to avoid the spread of moisture inside the phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple processing, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. It is recommended to bring your mobile phone to the regular Apple customer service center for inspection and maintenance.

Put it in the rice and bury it. Twenty-four hours later, take it out and you'll be fine.

iPhone water inlet solution:

1.Do not try to turn on the device immediately if there is water ingress. Because the iPhone has a built-in battery that cannot be removed, the motherboard will be short-circuited if it gets into the water, and if it is turned on, the motherboard will be burned, causing irreparable consequences.

2.You can first use toilet paper to dry the water outside the mobile phone, and then place the mobile phone screen horizontally to prevent water from flowing to the motherboard, and then use a blow dryer to dry the water, and turn on the temperature at medium or small temperatures.

3.Wipe down the circuit board with anhydrous alcohol and try to turn it on. Because alcohol volatilizes quickly, the moisture on the circuit board can be volatilized clean.

4.Send it to a repair center for repair as soon as possible. If the motherboard is severely corroded over time, it will cause irreparable consequences.

5.Make an appointment in advance for after-sales repair to waive the mobile phone cleaning fee of 299 (limited-time event).

Fish it out of the water as fast as you can (fast, every second) and turn off your iPhone immediately. Press and hold the power button until it turns off.

Remove all shells right away, as they will trap moisture. The screen protector can be left unpeeled unless you see visible blisters inside.

Dry your iPhone with a cloth, as dry as you can, you can wipe the screen, sides, and back with a cloth (t-shirt, socks, etc.) or absorbent materials. Pay special attention to the power buttons, volume buttons, mute switches, speakers, microphone, and audio output jacks, and try to wipe all visible moisture as much as possible.

Contact the after-sales center immediately for free inspection and repair.

Here's how to deal with iPhone X after it gets water:

1. First, press and hold the power button of your phone until it turns off.

2. Then remove all the shells as they will retain moisture. The screen protector can be left unpeeled unless visible blisters are seen inside.

3. Then wipe the phone screen, side and back. Pay special attention to the power buttons, volume buttons, mute switches, speakers, microphones, and audio output jacks, and try to wipe all visible moisture as much as possible.

4. Finally, put it under a slight heat source such as a desk lamp and spotlight to let the moisture slowly dissipate, and then try to turn it on.

After the mobile phone gets into the water, you should remove the back cover immediately, and it is very important to remove the battery! Then disassemble the phone card and remove the memory card.

Then immediately dry the moisture on the outer surface, if you can disassemble the machine, you can disassemble it and blow it with a hair dryer, to ensure that the motherboard, the surface of the screen is completely free of moisture, and the distance should be far away when blowing, do not blow in one place alone.

At this time, you should turn on the electric blanket, put the mobile phone screen down on the electric blanket (no battery), and then cover it with a quilt and dry it overnight.

If you really can't dismantle it, you can also put it on the electric blanket and dry it overnight!

If the above methods do not work, then you can only send it to the repair shop for repair!

If your iPhone falls into the water, you can go to a phone repair shop to fix it, which is the best and safest solution.

2. Shut down.

After scooping it up, it should be shut down quicklyOperation method:

Press and hold the [Power Button];

If you can't turn off by pressing and holding the [Power Button], you can press and hold the [Home Button] and [Power Button] at the same time to force the shutdown;

3. Remove the phone case.

It is estimated that all friends have protective cases such as mobile phone cases on their iPhones, so they must take off the phone cases after turning them off, which is to prevent the water in the phone cases from seeping into the iPhone and then damaging the motherboard;

4. Wipe the outside of the iPhone body.

After removing the phone case, use a dry towel or other paper towel to dry the water on the outside of the iPhone body.

5. Take out the SIM card.

After completing the above steps, quickly remove the SIM card and place it in a dry and ventilated place;

6. Absorb the accumulated water in the small pores of the iPhone body.

After completing the above operations, remember to blot up the water in the small holes in the external crevices of the iPhone body;

1. Fish the iPhone out of the water as quickly as possible.

2. Turn off your iPhone immediately. Disconnect the power immediately. Because the damage to mobile phones is often not caused by water itself, but by short circuits of internal components triggered by water, or even further cause the components to burn out or the battery**.

3. Remove all parts of the iPhone that can be removed as much as possible, such as the case cover, SIM card, headphone jack plug, etc., so that the moisture in the iPhone can be fully dissipated as much as possible. The screen protector can be left unpeeled unless you see visible blisters inside.

The easiest and safest to go to Apple after-sales disassembly and cleaning immediately after shutting down, if there is not much water, you can shake off the floating water, dry it with a hair dryer, the fastest is to heat the rice cooker (not too hot or the battery can't stand it) Put the phone in the dry pot and cover it for a few minutes to evaporate, if you are not in a hurry, you can also wrap it in paper and put it in a rice bag for a night.

First, natural air drying. Place the phone face down in the balcony sun for at least a week to dry the inside of the machine.

Second, use a hair dryer to blow the air. The temperature of the hair dryer should not be too high, so it is advisable not to burn your hands. Blow for at least ten hours or more.

Don't rush to charge or turn it on, otherwise it will break even worse.

Natural sunlight is the best way to dry it.

The water is generally fine, it is all waterproof glue, wipe off the water, and continue to use it if there is nothing to detect.

I'm afraid that some screens have been removed, and the water is particularly easy to enter.

This is more troublesome, and the motherboard will generally be burned, and the motherboard must be repaired.

Shut down immediately, and then send it for repair.

Here are some suggestions:

1. Drop into clean water when the power is on. Turn off the power as soon as possible. Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen.

If there are water droplets left on the screen, there will be traces after drying. Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours.

Do not use a strong heat source such as a hair dryer in a hurry.

2. Drop into non-corrosive liquid in the case of power failure. Shake it dry, but don't shake it off. If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point.

If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

3. Falling into non-clean water when the power is on. Turn off the power as soon as possible. If you have fallen into corrosive liquid, rinse the machine with clean water immediately.

Or immerse the machine in clean water and try to dilute the corrosive liquid inside. Disassemble the machine as soon as possible. But take your time when disassembling the machine.

Rinse with alcohol or professional washing water. Assemble or pile up the disassembled items to the maintenance point, so that the maintenance point can clean and assemble again.

Apple X is IP67 waterproof, if there is not much water intake, it is no problem at all, such as after taking it back, there is nothing that can be ignored.

However, if you soak in water for a long time or have dismantled the machine before to destroy the watertightness, it will definitely not work.

If there is a black screen, no boot, restart, and the screen does not move after entering the water, it is likely that there is a problem with the screen or motherboard.

Since water ingress is not covered by the after-sales warranty, it can only be repaired at a cost.

Pay special attention to motherboard maintenance, and don't replace the entire motherboard as soon as you hear that the motherboard is broken.

If the motherboard is broken, don't be afraid, the motherboard is not a whole piece, there are many small chips in it, including baseband, CPU, hard disk, WiFi module, touch screen IC and so on.

Many small local masters don't know how to repair chips, so they let the entire motherboard be replaced, which is very expensive.

In fact, you only need to change the chip, which can save more than half.

The yellow chip in the picture below is the most common power supply IC, and if it is burned, the screen will be black and will not turn on, just change it. The cost is 23 hundred, don't listen to what the small store says, change the motherboard of 34 thousand at every turn.

I have been doing mobile phone chip repair, and I know these very well.