How to keep it without water in the car rearview mirror on a rainy day

Method 1: Install a rain shield]**: Principle ranging from a few yuan to dozens of yuan:

The "rain shield", also known as the "rearview mirror rain eyebrow", is made of high-grade resin material, which can be bent arbitrarily and glued to the rearview mirror through special double-sided tape, the effect is like holding up a small umbrella on the rearview mirror. Pros and cons: If the rain falls vertically from the sky, it works well.

However, for the rain that falls obliquely, the effect is poor, which is the same as a person holding an umbrella vertically, and the rain that blows obliquely will still get people wet. [Method 2: Install a heated rearview mirror]**:

Hundreds of yuan to thousands of yuan principle: through heating, so that the raindrops can not stay on the mirror surface of the rearview mirror. When the rearview mirror is heated, the small condensed water droplets are quickly evaporated.

Pros & Cons: **Higher and requires a professional to operate. However, some also come with blue mirrors (i.e., when driving at night, even if the rear headlights shine on your car's rearview mirror, it will not look dazzling and play an anti-glare function), wide-angle (using multi-curved surface technology, a large field of view, and a more realistic image), etc., which increase the function and safety of the car.

You can consider installing rain eyebrows, rain film, and rearview mirrors to make electric home heat.

The rain eyebrows are like a small umbrella for the rearview mirror, which can well shield the baptism of rain and minimize the accumulation of water droplets.

Now the ** of the rearview mirror rain eyebrow is getting cheaper and cheaper, and the ordinary material of the rain eyebrow can be bought for only more than ten yuan, and the installation is simple. Therefore, many drivers believe that this is the most cost-effective and worry-free way to protect themselves from rain in the rearview mirror. However, there are also many drivers who say that if they encounter heavy rain, the effect of rain eyebrows will be greatly reduced, and they cannot completely block the rain at all.

Hydroplaning film. As the name suggests, the wakeboarding film is to condense the raindrops into water droplets, allowing them to flow down without sticking to the lenses, thus reducing the blurring feeling. Such a hydroplaning film will not hinder the aesthetics of the car like rain eyebrows, but its ** is quite high, and the life span is more than a year, treating the symptoms but not the root cause.

Therefore, the most effective way to prevent rain in the rearview mirror is to use heated rearview mirrors. Directly use the smartest way to completely evaporate the rainwater from the rearview mirror. Even in winter, you don't have to worry about the trouble caused by fog and water.

However, the installation process of this method is more, and it needs to be operated by a special person, which is very expensive.

Yes, add a rain shield: economical and practical.

Modified heated mirrors: good effect and high cost.

Apply water repellent: the effect varies depending on the quality.

Rub on the detergent: the emergency effect is average.

Changing to a wide-field rearview mirror: it works.

However, it is still used with hydrophobic film rearview mirrors, waterproof rearview mirrors, and hydrophobic film rearview mirrors.

Car mirrors can be reused to make the following methods without leaving rainwater:

1. The use of the original rearview mirror heating is the most effective. In rainy and snowy weather, the owner turns on the electric heating function of the rearview mirror, and the electric heating sheet will quickly heat up to a fixed temperature within a few minutes, generally between 35-60 degrees Celsius, so as to heat the lens, defog and defrost the effect.

2. When it is about to rain, apply washing spirit to the reflector.

There will always be some blind spots in the visual range that the mirror can provide us, and the driver's head cannot always twist around, which will increase the danger of driving. Hence the idea of a parallel assist.

3. The mirror surface has been treated without water stains through automobile coating. Brighten the car paint, keep the car paint shiny, but from the construction process.

4. The mirror surface has been treated without water stains by car glaze.

5. Apply detergent, soapy water, shampoo and a layer of car wax to the car mirror.

There are the following ways to keep your car mirrors water-free:

1. Try to destroy the surface tension of water droplets.

Use dish soap or soap, which contains surfactants, which can greatly reduce the surface tension of water droplets, and the rainwater will adhere evenly to the glass surface after use, although there is water, but it will not affect the sight.

2. Waxing increases its surface tension to achieve the effect of lotus leaves.

We all know that it is difficult to accumulate water droplets on the lotus leaf, because its surface fluff greatly increases the tension of water droplets, and waxing on the glass can achieve the same effect, after waxing, the surface tension of water droplets increases dramatically, and the water droplets are gathered into particles as much as possible, and the adhesion on the glass is greatly reduced, and the vibration or air flow during driving can easily make the water droplets fall.

3. Install a rain shield, which is available on a certain treasure, which is relatively cheap and can play a certain role in retaining rainwater.

It is a more common practice to install rain eyebrows on the rearview mirror, which is convenient and cheap, and the effect is more obvious, especially suitable for car owners who live in rainy areas. However, there are also certain limitations to the rain eyebrows, because in terms of style, there are usually two types of rain eyebrows: outer installation and inner installation. The outer side is glued directly to the rearview mirror, while the inner side is inserted into the gap between the rearview mirror and the frame.

The rearview mirror does not stick to the rain

Water method du

There are: 1. Install a rain shield. The rain shield is generally divided into two.

One is glued to the inside of the rearview mirror, and the other is inserted in the gap between the rearview mirror and the frame. It is recommended to choose a rain shield, because it is not only easy to install, but also only needs to do some simple degumming treatment after removal. If the latter kind of rain shield is installed, it is not easy to judge its thickness before unpacking.

Sometimes the rain shield you buy is too thick, which will hinder the rotation of the rearview mirror after installation.

2. Coated detergent. Applying detergent, soap, shampoo and wax to your car's mirrors is a simple way to temporarily fix the problem of foggy mirrors. Generally speaking, after applying a layer of detergent to the rearview mirror, it can keep the mirror clear for 1-2 hours in heavy rain.

If you use soapy water, shampoo, etc., and apply wax to the rearview mirror, it will last longer.

3.Install a rearview mirror with a heating function, this function is already available in many cars, but if you don't have it in the car you bought, it is not recommended that you install it, after all, the cost is relatively large, and you can use traditional methods.

Awesome, 48V modified 60V speed increased to 50 yards electric car without changing the controller God!

One of the easiest ways to keep the mirrors safe from rainwater is to apply a waterproof membrane to the mirrors.

Because the lens surface is coated with multiple layers of anti-reflective coating, the lens is particularly susceptible to stains, which can destroy the anti-reflective effect of the anti-reflective coating. Under the microscope, we can see that the anti-reflective coating has a porous structure, so oil stains are particularly susceptible to infiltration into the anti-reflective coating. But there are other ways:

1.Turn on the rearview mirror heating function. Now most cars have this function, which can evaporate the water vapor on the mirror by heating. Please refer to the manual for the specific opening button.

2.Installing rain eyebrows, which is available on a certain treasure, is relatively cheap and can play a certain role in retaining rainwater.

3.Soapy water, apply soapy water all over the mirror, rain touching soapy water will destroy the surface tension, and water droplets will not remain on the mirror. However, this one has a disadvantage, that is, it can only last for 1-2 hours.

4.Garlic. That's right, you read that right, garlic will work too. Crush the garlic and spread the juice evenly in the rearview mirror for 3-5 hours longer than soapy water.

When the lens surface is coated with multiple layers of anti-reflective coating, the lens is particularly susceptible to stains, which can destroy the anti-reflective effect of the anti-reflective coating. Under the microscope, we can see that the anti-reflective coating has a porous structure, so oil stains are particularly susceptible to infiltration into the anti-reflective coating.

The solution is to coat the anti-reflective coating layer with a top film with anti-oil and water-resistant properties, which is the so-called waterproof membrane. And this film must be very thin so that it does not alter the optical properties of the anti-reflective coating. At the same time, it does not allow rainwater to condense on the mirror.

The rearview mirror can be said to be an important part of the rear of the vehicle when people are reversing or changing lanes. However, on rainy days, the rearview mirror is prone to rain adhesion, which obstructs the view and affects the driving. There are many ways to keep the rearview mirror from rain, so let's take a look.

The best way to remove water from the rearview mirror.

1. Soap. It is more practical to put a piece of soap in the car, before traveling in rainy days, evenly apply the soap on the rearview mirror of the car, after the soap hardens, wipe it off with a towel, and a layer of wax will be formed on the surface of the glass, which has good water repellency, which can effectively prevent the blurred vision caused by fogging and water droplets in the rearview mirror, and can also increase the fragrance and taste.

2. Toothpaste. The use of toothpaste is the same as soap, apply the toothpaste evenly on the rearview mirror of the car, wipe and rinse with a towel, can effectively prevent the problem of fogging the rearview mirror.

3. Waterproofing agent.

Buy and use special waterproofing agent, now the waterproofing agent on the market is generally divided into spray type and smearing type, the waterproofing agent will be evenly sprayed or smeared on the rearview mirror, the surface of the rearview mirror will form a protective film, this protective film also has good hydrophobicity, can effectively prevent the rearview mirror from fogging or hanging water droplets, to ensure that the rearview mirror is clear.

4. Rain shelter and electric heating.

Install a rain shield for the rearview mirror to block the rain and prevent the rain from falling and hanging on the mirror surface. However, the rain shield can not solve the problem of fogging the rearview mirror, you can add electric heating to the rearview mirror, and the heating wire can increase the temperature of the mirror surface of the rearview mirror, effectively preventing fogging, and the two cooperate with the rain and anti-fog.

5. Waterproof membrane.

The waterproof membrane of the rearview mirror has good hydrophobicity, which can effectively prevent rainwater from adhesion and avoid rain blocking the rearview vision, thereby improving the safety factor of driving in rainy days. A good quality film has high definition, and it also has the functions of waterproof, anti-fog, dust-proof, anti-scratch, anti-fingerprint, etc., which can keep the mirror clear at all times, so as to relieve the trouble of driving in rainy days.

You don't get muddy at the audition after the car, just add some toothpaste and rinse it off with a paper towel.

You can apply soap or toothpaste on the rearview mirror, you can also spray waterproofing agent, and you can also install a rain shield, electric heating or waterproof membrane, which can be waterproof and anti-foggy, avoid rain blocking the rearview vision, and then improve the safety factor of driving in rainy days.

Now there is a special anti-fog towel that will help after wiping.

Or install two rearview mirrors to protect against the rain, which are generally available in auto parts stores.

Rain eyebrows can only be effective for light rain, and it is useless for heavy rain, unless your rearview mirror has a heating function.

It's good to add something like that to it, and car boutiques should have it.

The existing products on the market, including rearview mirror heating, rain eyebrows, and crystal plating, prevent the rearview mirror from hanging water, compared with our clear No. 1 rainproof and anti-fog film, the rearview mirror heating power consumption and effective process is too long, and a shower may have ended, and the rearview mirror heating will start to work, and the additional products may also damage the car line; Yumei, car owners who have used it should know that the effect of blocking the rain is not obvious, and it basically does not work in heavy rain; Crystal plating, the aging is only one month, and the project is complicated. In comprehensive comparison, our rain film has a very obvious effect regardless of the size of the rainfall, and the aging is as long as 1-3 years, and the installation is convenient, which can be said to be better than similar products.

The button for removing rain in the rearview mirror is on the air conditioning control panel, which is the same button as the rear windshield defogging. The button with a square and three airflow arrows on it is the rain removal button in the rearview mirror. Press it will heat the rearview mirror, so that the temperature of the rearview mirror surface increases, the water droplets on the rearview mirror become smaller and smaller because of the evaporation of the temperature, and the fog will slowly disappear, which plays a role in removing rainwater and effectively improves the problem of blurring the mirror surface of the rearview mirror.

The rearview mirror is very important for the driving of the vehicle, when the car is driving, not only look ahead, but also observe the driving situation of the vehicle behind the vehicle through the rearview mirror, if it is raining in the rearview mirror, the safety of the people in the car is greatly reduced. Rearview mirrors have rainwater treatment methods are:

1. By heating the rearview mirror, many vehicles have the rearview mirror heating function, when the rearview mirror has rain or fog, you can use this function, which can solve this problem very well;

2. Install a rain shield on the rearview mirror to prevent rain drops from falling on the rearview mirror;

3. Apply soap or dish soap to a wet towel to wipe the rearview mirror or apply some special water repellent agent, so that the rearview mirror has a waterproof effect and can effectively weaken the rain on the rearview mirror.

When driving in rainy weather, always control your speed and keep your distance from the vehicle in front of you. Try not to overtake, watch out for pedestrians and non-motorized vehicles on the road, and don't splash stagnant water on the road. If the rain is particularly heavy and the windshield wipers cannot clean the rainwater on the windshield in time, it is recommended that the driver should not continue driving, park the vehicle in a safe place, and wait for the rain to light up or stop before continuing to drive.