How to remove the dirt in the iphone6 volume hole?

Go buy the kind of mud that cleans the keyboard to stick to the dirt.

Remember to be gentle, don't press too hard, otherwise you will remove the sludge and press it into the earpiece hole.

You can also turn the ** off and wipe the earpiece with optical alcohol.

Use a paper clip to straighten the head and gently poke it to hook out the debris.

1. If you don't have experience in operation, don't do it yourself to avoid damaging the hardware.

2. It is recommended to take it to a repair shop or after-sales treatment, professional tools can better clean up the dust, and it will not damage the iPhone.

3. If you must get it yourself, you can use a cotton swab to gently wipe the inside of the edge of the sound hole, which is only suitable for the situation with little dust.

If you clean it yourself, you can buy the kind of mud to clean the keyboard to stick to the dirty place, remember to be gentle, don't press hard, otherwise it will remove the sludge and press it in the earpiece hole, or you can turn off the ** and wipe it with optical alcohol.

Ways to clean dust near the speaker and microphone on the top of your iPhone:

1.Find a piece of double-sided tape (transparent glue is also acceptable, but you have to find a particularly sticky one) and tear it into a band.

1. Tear into strips with double-sided tape or transparent glue.

2. Directly attach the transparent glue or double-sided tape torn into strips on the speaker or earpiece, and gently press and smooth it with your hands.

3. Then use your hands to quickly tear off the double-sided tape or transparent glue attached to the speaker and earpiece, and you will see that there is a lot of fine dust on the adhesive tape.

4. Follow the previous three steps to clean up the dust a few more times to complete the cleaning.

5. For obvious external dust, you can try to clean it with some soft small brushes.

6. For some imperceptible or fine dust, you can try to use double-sided tape with good viscosity, tear it into a ribbon, and then stick the double-sided tape on the microphone or speaker, and after easy smoothing, tear off the double-sided tape to stick out a lot of small dust that you haven't noticed.

Note: Do not force the inside of the earpiece, otherwise the membrane inside may be punctured and the earpiece will malfunction or distort the sound. If you have stubborn stains, you can use a cotton swab dipped in anhydrous alcohol to gently wipe them, and then use a brush to clean the dirt on them.

Ways to clean up iPhone 6 screen gaps:

1. Pull a little dough and clean the gap between the screen of the mobile phone. Note: The dough should not be too wet, or it should not be sticky, and it should not be too dry, or the flour will seep out.

2. Use a small brush to clean the computer keyboard and brush the gaps of the mobile phone screen carefully.

3. Use the corner of the A4 piece of paper to gently stroke it along the direction of the gap.

You can use a toothpick to pick out the mouth that made the sound, be careful not to push too hard, and clean it up. Or buy tools to clean up electronics on ** and do a clean up.

First of all, what we need to do is troubleshooting:

Step 1: Judge.

First of all, please make sure that you listen to other people's voices or listen to your voice

Then rule out whether it's because the call volume is set low.

Step 2: You listen to other people's voices to investigate the cause of small problems.

There's a problem with someone else's microphone (or a problem with their call volume setting).

Your handset is blocked, (e.g. a protective film is attached to the handset).

The signal is not good. Problems with your phone's settings.

Well, here's the key point, the workaround:

Step 1: Make sure the call volume is maxed out during the call and see if it can be solved.

Step 2: If the first step can't solve the problem, you can plug in Apple's original earphones to make a call during the call, and then unplug it to see if it can solve the problem of low call sound. If it still doesn't work, see step 3;

Step 3: iPhone 5S and below can cover the small hole next to the camera (noise elimination) when talking to see if it is due to noise.

For iPhone 6 Plus, please refer to the steps below to set it up.

Open Settings - General - Accessibility Function, find ** Noise Clearing, if the sound is loud after turning it off, it is the effect of noise reduction.

If it is water, go to the place where the phone is repaired, and it will be repaired five seconds after opening the cover.

iphone 6 plus

The iPhone 6 Plus is a smartphone launched by Apple on September 10, 2014 Beijing time. With an inch screen[1][2], it became the largest screen phone in Apple's history, and was launched in Chinese mainland on October 17, 2014.

The Chinese name is Apple 6+

Foreign name: iPhone 6 Plus

Developer release time.

At 1 a.m. Beijing time on September 10, 2014.

Availability. September 19, 2014.

**Processor.

64-bit Apple A8 chip + M8 motion coprocessor [3] size and weight.

172g form factor color.

Straight plate, silver, gold, space gray.

Camera: 8 million pixel iSight camera.

Screen size. inch screen resolution.

Memory: 1 GB, storage: 16 GB, 64 GB, 128 GB

Battery 2915mAh non-removable.

Also known as one of Apple's proudest products.

How to clean up the dirty inside the hole of the Apple mobile phone is as follows:

1. Clean up with a cotton swab dipped in alcohol. Or liquor or something, but don't dip too much and don't drip alcohol on your phone.

2. Wrap a piece of gauze with a toothpick, and the gauze is also stained with alcohol, and clean up the stolen goods in the mobile phone hole.

3. Go to a professional mobile phone store to disassemble the mobile phone and clean up the stolen goods in all aspects.