The Apple system does not have a highway surveying program

Measurement Workflow Essentials:

Measuring instruments and measuring tools shall be equipped with corresponding verification certificates and reported to the supervision team for the record.

A copy of the list of surveyors (professional certificates) of the construction unit shall be submitted to the supervision team for the record.

The person in charge of the surveying of the construction unit shall regularly introduce to the supervisor the changes in the measurement plan, control point and leveling point in the progress of the project.

The measurement records of the construction unit must be recorded in a formal record book and table, and each measurement should be carefully and truthfully recorded in the whole process of measurement without alteration, and the original data should be properly kept.

The original measurement calculation should go through 200 recalculation before it can be put into the actual measurement process, and the field measurement should be checked according to 100 retest, and only after passing the retest by the supervision professional can it be put into the next step of construction.

Wire control: the leveling point (temporary point) must be retested regularly, and the temporary point (leveling point, control fulcrum) must have more than 2 points for inspection.

Leveling point (temporary leveling point should be located on a non-destructible, solid building, it is recommended to retest once every three months, and pay attention to changes that may be affected by the outside world), find that there are changes in time to retest, report to the supervision engineer for retesting and approval.

All kinds of leveling points and encrypted wire points that have not been approved by the supervisors are not allowed to be used, and each temporary wire point or leveling point should be clearly marked and have written records.

Specific requirements for measurement work:

During the measurement, a quality system integrating observation, recording, calculation and inspection is formed according to the specification.

The measuring instruments are equipped with an annual inspection certificate.

The surveyor and measuring instrument are fixed accordingly, and the best time is selected for observation.

Measurement Workflow Essentials:

Measuring instruments and measuring tools shall be equipped with corresponding verification certificates and reported to the supervision team for the record.

A copy of the list of surveyors (professional certificates) of the construction unit shall be submitted to the supervision team for the record.

The person in charge of the surveying of the construction unit shall regularly introduce to the supervisor the changes in the measurement plan, control point and leveling point in the progress of the project.

The measurement records of the construction unit must be recorded in a formal record book and table, and each measurement should be carefully and truthfully recorded in the whole process of measurement without alteration, and the original data should be properly kept.

The original measurement calculation should go through 200 recalculation before it can be put into the actual measurement process, and the field measurement should be checked according to 100 retest, and only after passing the retest by the supervision professional can it be put into the next step of construction.

Wire control: the leveling point (temporary point) must be retested regularly, and the temporary point (leveling point, control fulcrum) must have more than 2 points for inspection.

Leveling point (temporary leveling point should be located on a non-destructible, solid building, it is recommended to retest once every three months, and pay attention to changes that may be affected by the outside world), find that there are changes in time to retest, report to the supervision engineer for retesting and approval.

All kinds of leveling points and encrypted wire points that have not been approved by the supervisors are not allowed to be used, and each temporary wire point or leveling point should be clearly marked and have written records.

Specific requirements for measurement work:

During the measurement, a quality system integrating observation, recording, calculation and inspection is formed according to the specification.

The measuring instruments are equipped with an annual inspection certificate.

The surveyor and measuring instrument are fixed accordingly, and the best time is selected for observation.

If you want to count the road you have walked, ios9 many come with a walk counting function.

If you want to measure the distance, you can use the map, but the starting point can only choose your own location, otherwise you can only find two points by yourself and calculate the approximate location according to the scale in the lower left corner of the map.

Using a computer's map, you can easily measure the distance in a straight line.

The stars in the sky are so beautiful.

Quote][color= 999999]Know Posted on 15 5 30 00:35[ color].

This is Apple's version of He Shudan!

Domestic development is generally based on the Android system, so there are very few Apple mobile phones.

You can go to the forum outside Guohui Qingwai to see that there may be friends under the border.

: iTunes Columbia GPS Pal Free, MotionX is the first choice if you pay for it, and that's what I'm using right now.

Yes, I forgot the name, not at all, I deleted it after using it a few times.

I have, leave an email and I'll send it to you. Remember to give a satisfactory review.

Can be connected to a computer;

2.Open iTunes on your computer, select iTunes Store and log in with your account.

3.Click on it in the bottom right corner. icon to select another country on the refreshed page;

4.Sync with your iPhone in iTunes and disconnect your phone from your computer when you're done.

5.Go to the Store tab in your iPhone's settings and log out of your account.