What should I do if there is mold in my house? What to do if there is mold in the house?

Why do walls get moldy:1. High humidity 2. There is mold.

In terms of humidity, it can be maintained as follows:

First, heat preservation. For the wall, the concrete and the wall floor, the corner of the wall and floor are easy to condense the area to insulate, and the window is made of double glazing or a condensation sink is added to remove the condensation on the glass.

Second, ventilation. Avoid enclosed areas in small spaces, and consider ventilation when they occur.

Third, lower the indoor temperature.

Fourth, if the above methods can't, you can consider using oil-based coating on the wall, and add a water guide channel at the corner of the wall and ground.

For mold, it is difficult to solve. Mold is usually removed at the turn of summer and autumn, when the weather is hot and dry.

It is recommended to reduce the humidity from the surface.

Mold should not be underestimated, it can cause respiratory problems, ** disease, is also an allergen, to be paid attention to.

Mold on the wall, indicating that the wall is damp, first check whether there is water leakage on the floor, if there is, solve it first;

Secondly, scrape off the mold on the wall and repaint it. It is best not to use medications. General medicines are harmful to the human body, such as air fresheners or insecticides.

The easiest way to do this is to ventilate. Mold lives in a humid environment, so as long as the room is ventilated, it will slowly disperse.

Open the window, spray some perfume or something, throw away the moldy stuff or dry it.

Wash the house, not the kind that splashes water on it, but open the windows and doors to bask in the sun.

The solution to mold in the house is to clean up, ensure that the room is clean, open windows for ventilation, keep it dry, and really help you look forward to it.

In daily life, there may be many people who are troubled by moldy houses. So the question is, do you know what to do if the house is moldy? What are the causes of mold in a house?

1. When mildew has appeared on the wall, you can first use a dry toothbrush to brush off the mildew stains, and then wipe it with a rag dipped in alcohol and wipe it off, which can not only keep the wall dry, but also avoid mold breeding.

2. After mixing bleach + water at a ratio of 1:99, spray it on the moldy wall, which can quickly solve the moldy situation of the wall. Or wipe it with a rag, then wash it with water, and wait until the wall is dry and brush with anti-mildew paint, which can be moisture-proof for a long time.

In addition, there is a convenient waterproof repair agent on the market today, which can be sprayed into the leaking crevice, which is very convenient to operate. Convenient.

3. In the case that the mold is not very serious, 80% alcohol can be used to wash the wall. Wash with ventilation and wear protective gloves, masks and glasses. In order to avoid re-mold, the walls should be thoroughly dried.

4. In addition, in the south wind day, the doors and windows should be opened less, try to keep the house dry, and in wet weather, you can assist dehumidifiers, fans and other equipment to absorb the moisture on the wall. As soon as there is moisture on the wall or furniture, it should be dried with a cloth immediately.

Causes of mold in the house.

1. One of the reasons for mold in the house is that the wall is damp due to water seepage in the drainage pipe or heating pipe, and the wall will naturally become moldy after a long time.

2. The rainwater on the exterior wall seeps into the interior and causes the wall to be damp. Cracks in the joints between the baffle under the balcony window and the wall, or the poor sealing of the window, may cause water seepage.

3. The difference between indoor and outdoor temperature is large due to the poor insulation effect of the wall, and the water in the indoor air will condense to the wall after being cold, resulting in the dampness of the wall.

How to prevent mold in your house.

1. Always open the window for ventilation, or turn on the fan to keep the air circulating indoors.

2. Put an appropriate amount of desiccant in the room to effectively remove the moisture in the room.

Summary: After reading the above introduction, I believe you have a further understanding of what to do if the house is moldy and how to prevent it from becoming moldy. If you need to know more about it, please continue to ******, and more exciting content will be presented to you in the future.

1. If there are mildew spots on the wall, you can first brush off the mildew stains with a dry toothbrush, and then gently wipe it with a cloth dipped in alcohol, which can dry the wall and avoid the continued growth of mold. 2. If the mold problem on the wall is not particularly serious, you can use alcohol to scrub the wall. However, it is necessary to pay attention to the ventilation of the room when washing, and be sure to wear masks and gloves for protection.

In order for the walls to be thoroughly dried and moldy to prevent the occurrence of mold, proper heating and ventilation should be carried out.

1. Generally, because the room is too humid, and there are people who have been in a humid and moldy environment for a long time, it is very bad for the health of the body, people are prone to rheumatism, or cause some diseases, such as eczema, etc., and may cause arthritis.

2. The moldy walls of the home are particularly easy to breed various germs in the home, reduce the body's immunity, and live in this environment for a long time, and the psychology is also easy to produce depression and closure.

3. The moldy wall will emit mold spores, which flow in the air and will enter the human body to invade the respiratory system and multiply rapidly.

4. If the immunity of the family is very low, it may also cause headache, fever, ** or mucosal inflammation, and in severe cases, there will be carcinogenic ingredients.