What do you look at home to know if fiber is shared or exclusive?

If you need to determine whether your home is dedicated or shared, you can use the following methods to determine whether your home is dedicated or shared.

1, ** a broadband detection software, detection in different time periods every day, if the bandwidth can reach the user's bandwidth standard, it means that the user is using exclusive broadband, if part of the time can not reach the standard bandwidth, it means that the user handles the shared broadband.

2. Directly consult the customer service of the operator to which your broadband belongs, and ask them to help you inquire about the broadband provided.

The fiber broadband installed by regular operators must be exclusive.

The optical fiber network is a fiber optic line, which is pulled from the splitter box to your home, connected to the optical modem, and then connected to the router or Yushan former computer, which is the optical fiber network access mode of regular operators.

If your home is connected with a 4-core or 8-core network cable and plugged directly into the router or computer, it is a fake broadband, shared network.

Hope it can help you.

For the current optical fiber network, according to different situations, it is described as follows:

Fiber Broadband Network: 1) The primary switching network from your home to the operator is exclusive to you, but it will be shared in the future. 2) After the switching node, everyone shares an uplink fiber to reach the operator's network.

3) This switching node may be a passive fiber node, an active fiber node, or an optical switch or other equipment. 4) Technically, the bandwidth of an optical fiber can reach 10 Gigabit or even higher, but when it reaches the operator's network control unit, it is controlled according to the user's promised rate;

Optical fiber leased line: 1) In the enterprise external network, generally speaking, the operator's optical fiber leased line is rented to connect to other networks, and such a private line network is exclusive, and the corresponding bandwidth resources are reserved for you regardless of whether the operator is used or not. 2) Note that the exclusive may be an optical fiber or a committed bandwidth.

3) Fiber dedicated line not only guarantees your rate, but also has the corresponding routing service, generally speaking, you are given at least 2 IP addresses in order to connect to the external network and realize routing services;

Since fiber broadband is shared, while private line is exclusive, fiber broadband is much cheaper than fiber dedicated line.

The access segment is 4 Mbit/s dedicated, and the upper-layer network is shared by all GE or 10 GE links. Carriers' public broadband access can ensure exclusive bandwidth in the access segment. Bandwidth sharing is also a feature of IP networks.

If you're a Northern Unicom, you're going to have 4MB exclusively

What this means is that even if the whole building is connected, every single one of them is installed.

You're still that fast, you can't be fast, you can't be slow.

Only a local operator can give you an accurate answer to this question!

Everyone else is talking about the general situation, and only they know the specifics.

1. Shared bandwidth: It means that users who share bandwidth share the network speed of this 10m optical fiber.

Generally speaking, the whole community is a local area network, and the total bandwidth outlet connected to the telecommunications backbone network is 10m, that is to say, if there are 100 people in the community at the same time, then there are 100 people sharing the bandwidth of 10m, therefore, the broadband access under the shared bandwidth may be reduced when there are more Internet users.

2. Exclusive bandwidth: When the user's computer accesses the Internet through broadband Internet access, the bandwidth of data transmission is connected to the network separately without going through any other links, which is the exclusive bandwidth.

The concept is similar to that of adsl.

Telecom will generally pull a total optical fiber for a cell, if it is 100m, then the people in this community will share the 100m fiber to access the Internet.

If there are only 10 people in the community who are online, each person can share about 10m equally, and if there are 20 people online, they will share about 5m equally.

Anyway, these 100m, you use it together, the network speed is slower when there are more people, and the network speed is faster when there are fewer people.

The main difference is that home fiber is smaller and lower than shared fiber in terms of flow, quality, and so on.

How can business and home be a home.

Commercial** is more than ten times or even dozens of times that of household use.

Because commercial broadband is a business cost for enterprises, it is necessary to make a profit; Home networking is consumption. It's not a concept at all.

One, literal understanding:

Sharing, that is, multiple people working together.

Home fiber is exclusive, that is, used alone, and only used by yourself.

Second, the difference between sharing and exclusivity.

The exclusive one is definitely more expensive. Shared ones are relatively cheaper.

In terms of bandwidth, the shared in-Internet summit card, which everyone uses, makes the total bandwidth smaller.

The shared data transmission is prone to vulnerabilities, interception by others, or the spread of viruses.

There are a few differences: one is that the broadband uplink is different, and the other is the fixed IP and unlimited broadband sharing.

The company should be consistent with the top and bottom. Upside is important.

The company should have a fixed Internet IP address... This one is very valuable.

Neither of these is available at home.

And they're all right, but operationally, it's like this:

Unit optical fiber occupies an exclusive switch or router equipment port in the operating business room, with relatively strong processing capacity and fast speed. This is why the charges are high, because it is exclusive to resources, including fiber resources, data ports, IP resources (you must know that IP resources are very valuable in the IPv4 world) and so on.

Home fiber is a port that everyone shares as a unit, so the processing power and speed are not guaranteed. Moreover, the fiber road is relatively short and still shares the main line, so it is relatively cheap.

To put it simply, there is an optical fiber from the operator's equipment room to a certain place, and if it is a unit user, it occupies this optical fiber alone. If it is a residential area, all users can basically use this article. The construction of optical fiber resources is relatively time-consuming, labor-intensive and costly, so it can be imagined.

In fact, when we rent a server, broadband is one of the very important reference data, and what is the difference between broadband sharing and exclusivity, for which Xiaoyi will summarize in detail for you.

What is Server Shared Bandwidth?

In the computer room, the service provider will equip each rack with a certain amount of bandwidth resources, and all the servers in the rack share these bandwidths, regardless of the specific bandwidth usage of each server, which we call shared bandwidth.

The advantage of shared bandwidth is that it is cost-effective, which is suitable for small and medium-sized customers who do not have special requirements for bandwidth; The disadvantage of shared bandwidth is that when some servers in a rack occupy a relatively large amount of bandwidth, it will affect the bandwidth usage of other servers in the same rack.

What is Dedicated Server Bandwidth?

The advantage of dedicated bandwidth is that customers can freely use the amount of bandwidth. China Telecom's exclusive broadband has been in the leading position among domestic operators. In terms of broadband quality, China Telecom continues to promote 100 Gigabit fiber to the home, and in order to allow more users to experience the convenience of 100 Gigabit broadband, it has also launched the "on-demand broadband" service, which can enjoy 100 Gigabit network speed for 1 yuan a day. By the end of 2017, China Telecom had more than 50 users with more than 100 Mbps and an average broadband access rate of more than 60 Mbps.

At the same time, China Telecom has launched gigabit broadband networks in more than 150 cities. In terms of service, China Telecom has always adhered to the principle of "same-day installation, same-day repair, and slow compensation", and has won praise from users in service details.

Through the above introduction, you should also have some understanding of the shared bandwidth and exclusive bandwidth of the server. Therefore, when renting a server, if it is only a small and medium-sized ** hosting and there is no special requirement for bandwidth, renting a relatively cheap shared bandwidth server can meet the requirements, if it is the kind of bandwidth that has certain requirements, it is recommended to choose a telecom bandwidth server.

There is no need to distinguish, your optical fiber is shared, and the current user broadband optical fiber is shared, and the exclusive one is called a private line.