What kind of cleaning agent is generally used for cleaning Tinno fume purifier?

Oil fume purifier cleaning.

1. The core component of the oil fume purifier is the high and low voltage electric field, and the oil fume purifier filter produced by various manufacturers generally has three or four layers. The first layer is the pre-filter, which is made of different materials by each brand, but its function is the same, mainly to remove large oil beads. The second layer is a high- and low-voltage electrostatic electric field that adsorbs respirable particulate matter with a diameter of microns to 20 microns.

This layer of filters filters out the particles that consumers are generally concerned about today. The service life of this layer of filter is generally a few years. If the filter is filled with dust and oil particles after a long period of use, these accumulations are likely to cause fire hazards due to the static electricity of the purifier's electric field.

2. The dust removal filter or dust collection plate in the oil fume purifier should be cleaned frequently, generally once every 1 or 2 months, and the high and low voltage electric field of the purifier should be washed off with caustic soda solution before drying before use, so as to keep the air flow smooth and hygienic. When there is a lot of dust on the electrodes of the purifier chassis and oil fume purifier, it should be removed, and it is generally maintained once every six months. You can use a long-bristled brush to remove dust from each electrode and wind blade.

Clean the machine housing and reducer every 2 months to ensure the purifier is operating at peak performance. If the purifier is used in a dusty environment, clean it frequently.

3. When the humidity of the fume pipe is very high, sometimes there will be water droplets on the electric field collection board of the fume purifier, and then the red and green indicator lights on the panel of the purifier box will flash back and forth, and the ammeter pointer will jump back and forth at the same time. The failure of the oil fume purifier occurs in a short time, and it is easy to burn out the power supply after a long time. Therefore, when the fume purifier is installed, the steam pipe must be discharged separately from the fume pipe.

When the fume purifier is not in use, it should be cleaned and packed into a packaging box and stored in a ventilated and dry place. Attention should be paid to moisture-proof at ordinary times, so as not to reduce the use efficiency or damage due to moisture.

The oil fume purifier has a good development prospect, the oil fume purifier uses the air to continuously ionize, produce a large number of negative ions, which are sent out by the micro fan to form a negative ion airflow, so as to achieve the purpose of cleaning and purifying the air. To clean the fume purifier, you need to know more knowledge to find a way to clean, if you are not completely sure, please ask a professional for advice. If necessary, you can go to the point of leopard to grab an order.

What aspects should be paid attention to when cleaning the oil fume purifier?

1.Prepare the items needed for washing. Prepare protective tools, waterproof gloves, fume purifier cleaner, water tank with a volume larger than the electric field, 、..

2.Open the machine cabinet door. Use the special triangular key configured with the fume purifier to unscrew the electric field door of the fume purifier;

3.The device is discharged. There may be some weak current left in the electric field of the oil fume purifier, touch the electric field with a screwdriver prepared in advance.

4.Take out the electric field. Lift the electric field slightly and pull it out of the box (handle it gently to avoid deformation);

5.Configure the cleaning agent. Pour the detergent into a water tank with 60 lukewarm water and stir well (detergent: water = 1:25);

Is it true that the cleaning of the oil fume purifier generally requires a screwdriver, well, because it is necessary to open these things?