How to install a bath bomb? How to install a bath bomb?

At. Toilet.

Target. Ceiling.

Fix one (or several) expansion screws on, with. Wire. From.

Bath bombs. Thread through the four mounting holes, then tie it to the expansion screws and fix it.

There are several installation forms of bath bombs: 1. Surface-mounted. It is directly fixed to the ceiling with screws.

2. Wall-mounted. Nail the wall and hang the bath bomb directly on it. The above two forms of bath bombs can be installed by yourself.

3. Ceiling-mounted installation. If you need a suspended ceiling, put the power cord of the bath bomb from the top in advance, and leave a groove on the wall before the wall is tiled, and the line passes through the groove (it is best to find a professional electrician, the brand bath bomb is responsible for installation) This is more beautiful.

Bath bombs are a must-have small household appliance in many families, but some friends don't know much about how to install bath bombs, so let's introduce the installation steps of bath bombs: Step 1 of installing bath bombs: Before decoration, you must buy back bath bombs, and then press the bath bomb pre-flow line (leave a few routes related to the bath bombs you bought, there are several bath bombs on the market now, and the functions are also different.)

Step 2 of installing the bath bomb: According to the size of the bath bomb you purchased, you must pre-flow the installation holes of the bath bomb on the ceiling, and make a frame with wood to fix the bath bomb and set up the exhaust pipe used for the exhaust of the bath bomb. After that, wait for the ceiling to be completed before installing the bath bomb by the way.

Step 3 of installing a bath bomb: You also have to ask an electrician to see if the wiring is enough, or how to adjust it, and ask a carpenter to help you see how to open the ceiling and make a wooden frame to fix the bath bomb.

There are two kinds of bathroom bath bombs, light heating and air heating, there is a big difference in the installation position, if the installation is not right, not only the heating effect is not good, but the bath will be colder and colder!

Hello, bath bomb installation first: 1. Select the positioning Baizhi, measure the size of the edge installation, and excavate the appropriate hole. 2. Install the machine head.

Arrange the line from the power supply to the switch (3 thick wires). 3. Arrange the control line from the head to the switch (generally ask 5 7 cores), and connect the line according to the control function. 4. Power on and test the machine.

Answer: If you find that there is a control error, you can adjust it.

Depending on what style you buy, there are those that are installed on the ceiling, and those that are directly hung on the wall, you must have professional tools, and you will not find a professional on the ceiling.

1. Opening ventilation holes;

2. Install ventilation pipes;

3. Installing the ceiling;

4. installing a switch;

5. Dismantling the panel and bulb;

6. Connection of wiring and ventilation pipes;

7. Install the bath bomb host;

Temporary use of bright and dark lines are OK, with an expansion screw, wire hoisting, Philips quality 130 yuan.

You can consult the bath bomb manufacturer, or you can ask them for after-sales service, or install it under their guidance.

If you install a bath bomb in the bathroom, it plays a very important role. How to install a bath bomb? PChouse will take you to find out.

1. Determine the ventilation holes.

Ventilation holes are an important part of the bath bomb, if there is no ventilation holes, the air inside will not be able to circulate to the outside, so the location of the ventilation holes in the wall should be determined first when installing. This is best above the ceiling, but slightly lower than the air outlet, so that the water in the house ventilation duct can be effectively backflowed.

2. Installation of ventilation fan.

Connect one end of the ventilation pipe to the ventilation window, and then extend the other side from the wall to the air outlet of the external wall, and fill the ventilation holes and the holes in the ventilation duct with cement to avoid rainwater from entering the hole. Secondly, the location of the center of the bath bomb should be within meters from the ventilation hole, because in general, the length of the ventilation pipe is generally between meters.

3. The position of the bath bomb is determined.

After the above procedures are installed, the next step is to determine the location of the bath bomb, and the height of the bath bomb and the ground is best between meters and meters. Secondly, when installing, the light of the bath bomb should be concentrated on the back of the bather, which can prevent the bather from catching a cold during the bathing process.

4. Wiring. After the position of the bath bomb is determined, the next thing is the wiring, first take off the bulb of the bath bomb, then remove the mask and spring, and then connect the line according to the sign in the wiring diagram, and then put the binding post cover after the wire is connected, and then stuff the extra line into the ceiling, which can increase the aesthetics.

5. Ventilation pipe connection.

After the wire is connected, put the ventilation pipe on the air outlet of the ventilator housing, and then plug the entire box of the bath bomb into the reserved position according to the correct position, and fix the bath bomb.

6. Install the mask and light bulb of the bath bomb.

Insert the bath bomb's mask into the positioning slot, then hook the snap hook and finally screw all the bulbs and you're done.

Here's how to install it:

1. Determine the ventilation holes.

The first thing to do is to determine the location of the ventilation hole of the bath bomb on the wall, preferably above the ceiling, slightly lower than the air outlet, so as to prevent the water in the ventilation pipe from flowing backwards.

Second, the installation of ventilation fans.

First, one end of the ventilation pipe is put on the ventilation window, and then the ventilation window extending from the wall at the other end is fixed at the air outlet of the external wall, and then the gap between the ventilation hole and the ventilation pipe is filled with adjusted cement; Note that the center of the bath bomb should be within meters of the ventilation hole, as the length of the ventilation pipe is mostly meters.

3. The location of the bath bomb is determined.

The position of the bath bomb should be at a height of meters from the ground, and it is also necessary to pay attention to the light of the bath bomb as much as possible to focus on the back of our bath when bathing, so as to better avoid catching a cold during bathing.

Fourth, wiring. First, unscrew the bulb of the bath bomb, then remove the spring and mask; Then do a good job of wiring according to the wiring diagram and the sign of the binding post, cover the binding post cover, and it is best to stuff the excess wires into the ceiling.

5. Ventilation pipe connection.

Put the ventilation pipe on the air outlet of the ventilator housing, then select the correct direction to tuck the bath bomb's box into the reserved position, and secure the bath bomb.

6. Install the mask and light bulb of the bath bomb.

Align the bath bomb's mask with the positioning slot, then hook the spring and screw all the bulbs.

The installation steps of the bath bomb are as follows:1Determine the installation location:

Generally, bath bombs should be installed on the top of the bathroom, and the distance from the bathtub or shower should be about 60-70 cm. 2.Mounting Bracket:

Fix the bracket of the bath bomb in the mounting position and fix it with expansion screws or wooden screws. 3.Install the power cord:

Connect the power cord of the bath bomb to the power outlet, pay attention to the correctness of the wiring, and it is best to ask a professional electrician to wiring it. 4.Installing the bath bomb body:

Install the bath bomb body on the bracket, pay attention to the position of the bracket, and then fix the bath bomb body on the bracket. 5.Install the bulb:

Install the bulb on the lamp holder slide of the bath bomb, pay attention to the specifications and power of the bulb, and it is best to choose a bulb that meets the requirements of the bath bomb. 6.Installing the Fan:

If the bath bomb has a fan function, you need to install the fan on the bath bomb body, and then connect the power cable of the fan to the power cable of the bath bomb. 7.Mounting Panel:

Install the panel of the bath bomb on the bath bomb body, and then fix the panel on the bath bomb body. 8.Debug:

After the installation is completed, you need to debug and check whether the functions of the bath bomb are normal, such as bulbs, fans, heating and other functions. Notes:1

You need to pay attention to safety when installing, and it is best to ask a professional to install it. 2.Before installation, you need to check whether the accessories of the bath bomb are complete, such as screws, brackets, bulbs, etc.

3.When installing, you need to operate according to the requirements of the manual, and do not disassemble or change the structure of the bath bomb at will. 4.

After the installation is completed, it needs to be debugged to ensure that the functions of the bath bomb are normal.

Air heater bath bomb installation method:1. Determine the location.

Determine the installation height of the bath bomb, install it on the ceiling above the bathtub or shower room, and keep the air outlet away from the shower position.

2. Leave air outlets.

The air outlet is usually 10 cm in diameter and should be opened before the ceiling is lifted.

3. Leave a special entrance.

According to different gussets, special openings should be reserved for the size of the opening.

4. Fixed bath bomb.

Open the binding post cover on the box, connect the wires according to the wiring diagram and binding post markings, cover the binding post cover, and then fix the binding post cover with screws.

5. Install a bath bomb.

Pull one end of the ventilation pipe into the room, cover it on the air outlet of the centrifugal fan hood, then push the box into the hole, select the correct direction according to the position of the air outlet, and then stuff the box of the bath bomb into the hole; Secure the box with four wood screws with a diameter of 4 mm and a length of 20 mm.