How to make the bark texture of cement fake trees

The simple production process of cement rockery is as follows:

1. Fake tree frame production: use 4cm 4cm angle steel and paint rust paint for anti-rust treatment.

2. Tie barbed wire: the hot-dip galvanized barbed wire is covered on the frame of the fake tree.

3. Fake tree modeling treatment: No. 325 cement is used for modeling, and 1:2 cement mortar is used as the base for the first plastering, and 1:1 cement mortar is used for the second plastering. The third plastering is formed by a 1:1 cement mortar brush.

4. Fake tree surface coloring and accessories:

Color matching materials: 2 parts of cooked brown, 1 part of raw brown, 1 part of Heshi, appropriate amount of gasoline, appropriate amount of alkyd varnish.

For the detailed production process of cement rockery, readers can go to (Zhumu Garden Network) to see the article "Cement Artificial Tree Production Process".

The production method of cement fake tree texture is more complicated, if you want to do it well, you need to have a certain amount of work experience, and the basic production method is as follows:

The modeling is made of No. 325 cement, and the 1:2 cement mortar is used as the base for the first plastering, and the second plastering is trimmed with 1:1 cement mortar. The third plastering is formed by a 1:1 cement mortar brush.

For detailed production methods, you can go to the Wood Gardens Network to view the article "Cement Fake Tree Production Method".

This is a secret! Those who have learned art generally use tools and hands to shape directly!

If you don't have a foundation in art, you can use molds to press out textures! It can be fake!!

How to make a mold, I won't tell you haha.

1. After the cement fake tree model passes the acceptance, it enters the first step of production, welds the frame of the cement fake tree with steel bars, welds the main keel with thick steel bars, and then welds the shape of the cement fake tree with thin steel bars, including the trunk and branches of the cement fake tree.

2. After the shape of the cement fake tree is welded, you can tie the galvanized wire mesh on the shape, and Beijing Vale uses a net gun to tie the wire mesh, which is strong and durable, and the density of the binding is about 10 cm.

3. The cement artificial tree can be plastered after the completion of the wire net, and in order to make the cement artificial tree more solid, Beijing Vale added the stub wire of the appropriate ratio in the first cement line, and then entered the second and third plastering sculpture procedures. The surface texture of the cement fake tree is depicted with cement.

4. After the cement fake tree makes the surface texture, you can color the surface texture, before the coloring, we will polish the surface of the cement fake tree finely, and then color, and use non-toxic acrylic for coloring, because it is a cement fake tree used in the children's room, so it is fluorescent.

5. The surface treatment of cement artificial trees is very important, Beijing Vale adopts the method of multi-time coloring, so that the coloring of cement artificial trees is very layered, and the color protection agent should be painted on the surface of the cement artificial tree after the color is qualified, so that the color is not faded.

6. After the cement fake tree is made, there are many parts to decorate, there are many small details, such as lighting decoration, etc., only these small details are in place, in order to become a good cement fake tree.

1. Positioning and lofting are carried out according to the drawings, models and site conditions. Determine where the fake tree occupies and how much space it covers.

2. Laying the foundation. Commonly known as "laying a foundation", like repairing a house, making cement fake trees is easy to collapse or fall if the foundation is not laid. The foundation is generally laid with 18-22 rebar (customized according to the size of the fake tree) plus concrete to fix the roots.

3. Skeleton welding production.

The main material of the trunk is 50 50 5 angle steel, and the branches are made of round steel or small rebar, (Note: all steel bars need to be painted with rust paint for anti-rust treatment). According to the drawings, the general shape of the fake tree was welded with a welding machine.

4. Tie the steel wire mesh evenly on the top of the fake tree that has been welded, and then tie it with the steel wire, which must be tied tightly to avoid falling off.

5. Plastering. After the installation of the barbed wire sheet is completed, the base layer is plastered with 1:1 cement mortar, and the thickness is about about that; After the first time is completed, a second plastering is carried out, and the cement is adjusted to the color of the trunk with yellow powder, and the thickness is about . After the completion of the two layers of plastering of the exposed part of the fake tree, the mortar inside the fake tree is plastered in time, with a thickness of about 1cm.

6. Modeling. According to the model and the type of tree to be built, the fake tree is modeled to create wood veins and stripes. Use a pull (a tool used to hook joints in construction) or a small shovel to press the texture of the tree one by one or on the mud, and do not die of mud between the strips, leaving natural operation joints.

7. Coloring. Plain cement (do not use yellow sand), iron oxide red powder and construction glue to mix into a viscous form, to be very thick, plain mortar is: cement + pigment powder or color paste + construction glue + a small amount of water. The pigment powder will float, so you can get drunk with white wine before adding it.

The modeling ability is strong, the color is accurate, and it can be done very realistically.

The cement is tuned to the color of the trunk with yellow powder, the skeleton of the tree is made with steel bars, the shape of the tree is made with cement, and the wood grain is carved on the surface with iron nails.

Wire rod No. 425 cement, barbed wire, swords, fuel, etc., the key is the art modeling, the color, the texture, the texture!

We are an art sculpture team and a large can be found in us.

Made of reinforced concrete. Near Beijing-Tianjin-Hebei to the site of construction, 8,000 up.

Is there any indoor artificial tree in Chengdu or Longquan? How much?

Tools used to make fake trees from cement: scaffolding, trowels, rags, brooms, spray cans, etc. Materials required: cement, sand, fiberglass, alkali-resistant mineral pigments, steel bar.

The fake tree production process can be roughly divided into four steps: fake tree frame production, barbed wire tieing, fake tree modeling, and fake tree coloring.

First, the fake tree frame production, second, tie barbed wire, third, the fake tree modeling treatment, fourth, the surface of the fake tree color and accessories.

Materials: cement, sand, fiberglass, alkali-resistant mineral pigments, steel bars;

Tools: scaffolding, trowels, rags, brooms, spray cans, etc.

The tools and materials for making cement artificial trees are as follows: (The specific production method of cement artificial trees can be viewed on the Zhumu Garden network).

Artificial tree production materials: steel (including profiles, wire), channel steel, angle steel, rebar, wire rod, wire mesh, iron wire, cement, yellow sand, fiber wire, paint or acrylic paint.

Fake tree making tools: welding machine, shovel, pliers, vise, electric box, electric pen, scaffolding, wrench, hammer, large and small iron plate (plastering tools), brush, roller, spray gun, pail, etc.

Answer: You can use iron oxide yellow, iron black (or graphite powder), iron red (or purple earth), three pigments and cement to make a similar color with a brush, let it dry for a day, and then brush it once or twice with a matte varnish.

Color is made up of three primary colors: red, blue, and yellow (excluding white) that can form a kaleidoscopic array of colors.

Red + Blue = Purple.

Red + Yellow = Orange.

Yellow + Blue = Green.

The color above each component change point appears: grass green, emerald green, medium green, vermilion, bright red and other colors yellow skin color:

Add a generous amount of white with red (a little) and a little more golden (a quarter of red) and stir evenly with some water.

White: White, after painting, then apply some pink on the cheeks (to be even and detailed) Black: It is best not to paint all black when drawing, it is best to be black brown.

Description: Adding white to any color in the pigment will make it pink and lightened.

Pigments can be used in any mixture between pigments, and if you want to dilute them, you only need to add a little water.

Pigment palette.

Ripe brown = lemon yellow + pure black + rose red pink rose red =

Pure white + rose red.

Vermilion = Lemon yellow + rose red.

Deep Red = Rose + Pure Black.

Purple Red = Pure Purple + Rose Red.

Hope it helps, dear