How to deal with floor cracks? How to remedy cracks in the floor

Relevant experts pointed out that due to the characteristics of the solid wood floor itself, once the installation and use are improper, even fully qualified products will have quality problems, so the maintenance of the floor is very important.

When maintaining solid wood flooring, we must pay attention to keeping the floor dry and clean. Usually, the moisture content of the floor is generally maintained at 8 13%, and such a floor will generally not have problems under normal circumstances. However, improper laying and use will also cause quality problems of solid wood flooring, such as no moisture-proof treatment when laying; Wet with water or scrub with alkaline water or soapy water, which will destroy the brightness of the paint; The bathroom and the floor of the room are not properly isolated; In summer, the curtains were not drawn, so that the floor in front of the window changed color and cracked after being exposed to scorching sunlight; Or the temperature of the air conditioner is turned on too low, so that the temperature difference between day and night changes too much, causing the floor to expand or contract too violently and cause deformation and cracking.

During the use of the floor, if it is found that the individual floor is warped or falling off, the floor should be picked up in time, the old glue and ash should be removed, the new glue should be coated, and compacted; If the paint film of individual floors is damaged or exposed, you can use No. 400 water sandpaper dipped in soapy water to polish, then wipe clean, wait for drying, carry out local color, after the color is dry, brush and apply a paint, dry for 24 hours, polish with No. 400 water sandpaper, and then wipe the wax for polishing. Waxing once a month is also the best way to maintain it, but wipe off moisture and stains before waxing. (Excerpt from the self-love my home**Net Gusu Decoration Forum).

Wipe it with glass glue of the same color, and that's it.

Only strips of wood can be added, re-planed, polished, painted, painted, and waxed.

1. Heavy pressure and waxing. The remedy should be different according to the size of the crack in the floor, and there are three ways to deal with this slightly warped floor. You can use a heavy object to press on it, if after a period of time, the floor will be restored to level by itself, and then the floor will be waxed, and the waxed floor will basically be almost the same as the original floor.

2. Repaving. If there are cracks and bulging areas in the floor, it may be because the workers ignore the thermal expansion and cold contraction characteristics of the wood material when laying the wooden floor, and the expansion joints are not in place. Find the installation position of the skirting on the wall along the bulging floor, pry the skirting apart, see if the expansion joint has been attached to the wall, and re-lay the warping part.

3. If this situation occurs, it is recommended that you find the manufacturer to seek after-sales service, as long as the floor has not been blistered, during the warranty period (usually the warranty period is one year), the merchant will inspect and repair it for free.

Cracks in the floor should be repaired with touch-up paint and waxing on the surface of the floor.

If there are cracks in the paint layer on the surface of the floor, you can use sandpaper to polish the cracks, then use a rag to clean the floor, then use a dry rag to dry the floor, and finally touch up the paint and wax on the surface of the floor.

If the cracks in the floor are minor, the cracks can be filled with a mixture of wood of a similar color to the floor. If the cracks in the floor are severe, the only way to replace the floor is to replace it with a new one.

If the gap between the floors becomes larger, and the width of the gap exceeds two millimeters, the floor should be disassembled, and then part of the floor should be replaced with a new one, and then the floor should be re-laid on the ground. If the width of the gap in the floor is less than two millimeters, it does not need to be repaired.

When cracks appear in the floor, you need to find a way to deal with them. How do you fix cracks in the floor? PChouse will take you to find out.

1. Repair the cracks in the surface paint layer.

If the surface paint layer has a small area, it can be properly painted and waxed; However, if the area is large or the situation is seriously balanced, it can only be smoothed. The method of fitting the body is to first sand the worn area with sandpaper to remove the dirt, then wipe with a dry soft cloth, recoat or apply the polyester film.

2. Repair cracks in the floor.

For floors with light cracks, some mixed culture mixtures can be used to fill the cracks; If the cracking is severe, the only solution is to replace the cracked part.

3. Repair the gaps between floors.

If the gap between the floors is more than 2 mm, it needs to be repaired. In severe cases, the flooring should be completely removed and some floors should be resurfaced and, where appropriate, replaced. At this point, expansion joints still need to be reserved to prevent the floor from expanding when wet.

<> "How to deal with cracked floors.

1. If only small cracks appear on the paint surface, you can use similar paint to repair and then wax. 2. If the cracking is not serious, some mixture can be used for filling. 3. If the crack exceeds 2 mm, maintenance treatment is required.

4. If it is due to seasonal cracking, the repair time can be slightly delayed.

What are the common problems and solutions to flooring.

1. Wet swelling arch.

In this case, without affecting the use function, it is recommended to wait for the moisture content of the wood floor to maintain a balance with the relative humidity in the gas, and then carry out the disassembly and assembly plan according to different situations, or it can also be completely dismantled and re-paved, so as to facilitate the adjustment of the segmented joints and the expansion joints reserved by the adjacent plates.

2. There is a sound on the wooden floor when walking.

This situation is usually because the moisture content of the keel is too high when paving, and the moisture content will decrease after gradually drying, and then the nail holding force of the wood will be reduced, so that the phenomenon of loosening occurs, it is recommended that before construction, we must pay attention to check the cross-sectional size and moisture content of the keel, so as to avoid the sound when walking to a certain extent.

3. Warping and deformation.

In this case, it is recommended to remove the wooden floor around the room to make it round and rotten to disperse the moisture, which can better alleviate the deformation situation, and for the deformed wooden floor, it is recommended to replace, remove all the paved wooden floors, and wait until the base or keel is dry before re-paving.