What should I do if the Win10 system can t connect to the hidden wireless network?

The solution to the hidden wireless network is as follows:

If the win10 notebook can't connect to wifi, you should first enter the device manager to see if the network adapter, whether the built-in wireless network card driver of the notebook is normal, and whether the wireless network is disabled. If the NIC driver is not installed properly, the wireless NIC will not be found here or there will be a yellow exclamation mark on it.

If the wireless network card driver is normal, you can go to the network adapter and look at the wireless network properties and other information. The specific method, in win10 in the lower right corner of the "network icon" on the right click, and then click "open network and sharing center", and then click to enter the left side of the "change adapter settings", here you can mainly see the status of the wireless network and other information. If you have a network cable plugged into your computer and you are not using a wireless network by default, you can unplug the network cable plugged into your computer, and if wireless is turned on, it will automatically switch to the wireless option.

If you encounter a win10 notebook that can't connect to the wifi wireless network, just look at whether the network card driver in the device manager is normal, and then see if the network connection settings are normal.

To connect to a hidden wireless network, you need to know the SSID (hotspot name) and password of this wireless network, and do the following:

Win8 system:

1) Press the win+i shortcut key to open the computer settings;

2) Click Network, select the hidden network in the pop-up interface, and click Connect;

3) Enter the network name and click Next.

4) Enter the password, click Next, if the password and name are correct, the connection will be successful.

Win10 system:

1) Click on the network icon in the status bar.

2) Select the hidden network in the pop-up interface and click Connect;

3) Enter the network name (SSID) and click Next.

4) Enter the password, click Next, if the name and password are correct, the connection will be successful.

Probably because the name of wifi is Chinese, it would be good to change it to English or numbers.

In the Windows 10 operating system, it is possible to connect to a hidden wireless network in the following waysThe specific steps are as follows:

1. Tap Settings - Select Network & Internet to open the Network & Sharing Center. (Right-click on the network connection icon in the bottom right corner);

<> you can connect to the hidden wireless network in the above way.

The specific steps are as follows:

1. Click the wireless wifi icon in the lower right corner of win10 and click "network settings";

2. Click "WLAN" - Network and Sharing Center;

3. Click "Set up a new connection or network";

4. Select "Manually connect to the wireless network" and click "Next";

5. Enter the hidden wifi name after the "network name" or on the combat surface, change the "security type" and "encryption type" under the "wireless security shirt source settings" option in your wireless router, that is, it must be consistent with the security type and encryption type on your router - "security key" fill in the password for hiding wifi - check "automatically start this link", "connect even if the network is not broadcasting" - click "next".

It should be noted that if the security type in the router is WPA-PSK WPA2-PSK, WPA2-Personal should be selected when setting it in Win10 PC. If you can't connect, please try a few more decryption types, and if you can enter the router, you can also see what type you have set.

If the laptop can't connect to the hidden wifi, it may be that the wifi network name is Chinese, and you need to change the SSID to the English name.

The premise is to know the name of the hidden wireless network and the secret pants size.

After turning on the wifi, there is an other in the mu segment below the searched wifi list, click in, enter the name of the hidden wireless network hotspot, select wpa wpa2 psk for security, enter the password, and click OK.

This issue occurs due to an incorrect setting, and the following steps can be used to resolve the issue

1. First of all, click "Network and Sharing Center" as shown in the image below, and then go to the next step.

2. Secondly, in the pop-up window, click on the "Set up a new connection or network" option as shown in the image below, and then proceed to the next step.

3. Then, in the pop-up window, select "Manually connect to the wireless network" and click "Next" as shown in the image below, and then proceed to the next step.

4. Then, in the pop-up window, enter the wireless network information you want to connect to, and click "Next" as shown in the image below, and then go to the next step.

5. Finally, the system will prompt that a wireless network has been added, as shown in the following figure. In this way, the problem is solved.

Win10 even hidden wifi I've added,Or keeps showing that can't connect is caused by the wrong setting,The solution is:

1. Click "Network & Sharing Center".

2. Click "Set up a new connection or network".

3. Select "Manually connect to the wireless network" and click "Next".

4. Click on the wireless network you want to connect to, and click "Next".

5. After that, you will be prompted that you have added the wireless network (when the wireless network is turned on, the computer will automatically connect to it).

It's possible that your wireless card only supports the frequency, while the hidden network frequency is 5GHz. To solve this problem, the only way to solve this problem is to buy a new wireless network card that supports 5GHz, and buy a dual-band wireless network card online.

1. Turn off the hidden SSID of the router first, display the SSID, and then try to connect with the computer to see if it can connect normally.

2. If you can't connect, and other wireless devices can be connected normally, computer problems, reinstall the wireless network card driver to try. If it still doesn't work, reinstall the system with the original system disk, and then reinstall the wireless network card driver. Still doesn't work, try replacing the wireless network card.

3. If you can connect normally, hide the SSID of the router and connect again.

In order to prevent others from connecting to their own wireless network, some friends usually hide their SSID when setting up a wireless router. In this case, the device will not be able to search for a wireless signal and will need to be connected manually. So, how to connect to the hidden wireless network under the win10 system?

Below, we will share the method of manually adding a hidden wireless network configuration to achieve the purpose of automatic connection at boot.

Recommended:

The details are as follows:

1. Right-click the network icon of the wireless signal in the lower right corner of the computer desktop, click to open the network and sharing center (or the network on the desktop with the right coarse key, click Properties, and enter the network and sharing center page), as shown below.

2. And click to set up a new connection or network, as shown below

5. After the wireless profile is added, click Close, as shown in the following figure:

PS: When the router is not connected to the external network, the wireless signal will be displayed as limited, then the wireless connection between the computer and the router is connected, and the computer can log in to the management interface of the router. As shown below:

The above is the specific method of connecting the windows10 system to hide wireless wifi for everyone, and win7 win8 is almost the same as the same, interested friends may wish to learn it.

Sometimes, many users will hide the wireless network in order to prevent the wireless network from being rubbed, but if we want to be inWin10 system:How do I add a hidden Wi-Fi network? Next, I will bring you the method of adding a hidden wireless network to the win10 system.

1. First of all, before adding, we need to know the password, SSID, and encryption method of the wireless network. information about wireless networks;

2. We click on the wireless network icon on the taskbar;

3. If there is a hidden wireless network nearby, it will automatically detect it;

4. We click "Hide Wi-Fi" and then click "Connect";

5. Then, we enter the name of the network. It's the name of our wireless network;

6. Then we enter "Network Security Dust as a Key". It is the dense hail code that we set up the wireless network;

7. He will have a prompt to choose according to his needs, and I choose "yes";

8. In this way, we have added successfully;

9. When we look at the wireless network icon on the taskbar, it does not show a cross, but shows that it is connected.

The method of adding a hidden wireless network to the win10 system will be introduced to you here, and users who need it can follow the above methods and steps to operate.

1. In the lower right corner of the win10 system screen, click on the wireless network icon - > select "Network Settings", as shown in the figure below.

2. Click "WLAN" - Network and Sharing Center;

3. Click "Set up a new connection or network";

4. Select "Manually connect to the wireless network" - Next".

5. Enter the hidden wifi name after the "network name" (in this case teteng-2) - security type, "encryption type", please check under the "wireless security settings" option in your wireless router, that is, it must be the same as on your router'If the security type and encryption type are the same, > the security key" to fill in the password to hide the wifi - > check "Start this link automatically", "Connect even if the network is not broadcasting" - click "Next".

6. Click "Close".

Pay attention to the problem

1) If the security type in the router is WPA-PSK WPA2-PSK, when setting it in the win10 computer, you should select WPA2-personal.

2) If the connection is unsuccessful, please try to change the security type in win10.

Go to the Control Panel.

Go to Network & Internet and tap Set up a new connection or network.

Tap Manually connect to a wireless network.

Enter the network SSID and secret key.