How to reinstall win10 system for beginners?

<>2. After waiting for the computer to detect the basic configuration information, click "Next" to continue the operation.

<>4. In the following interface, check the installation software and important files according to your needs for backup, and finally click "Start Installation".

<>7. After the computer is successfully restarted, enter the startup manager interface, and select PE mode to enter.

8. After the computer successfully enters the PE system, it will start to install the system automatically, we only need to wait patiently for the installation to be completed.

9. After the system is successfully installed, start to "restart" the computer immediately or wait for the computer to restart by itself.

Open and run the installation bar to reinstall the system software with one click, and close all antivirus software before opening to avoid the failure of the reinstallation process due to interception;

After opening the software, the one-click installation interface will be opened by default, and the system reinstallation is selected here;

Detect the system and hardware environment of the computer, you can see some information about your computer here, click Next;

Here select the Windows 10 system that needs to be reinstalled, and click Next;

You can choose to back up the data of the system disk, if there is no important data, it is recommended not to back up, so as not to waste a lot of time, click Next and click Install the system;

Install the system on the Internet, if you want to activate it without activation, you can use it when you install it: 2. Extract the ** file to the E disk (or D, F), it is best to decompress it directly to the disk, do not decompress it to any folder (because some friends will not choose or do not understand the problem in the following operations). 3. After unzipping, find the ghost image installer.

exe (or possibly a hard disk installer, etc.), double-click to run. 4. Click OK in the open window, click OK when you encounter anything, and then start the installation (you may restart the computer during this process, don't worry).

The specific tutorial shares the system package, just follow the steps to install it.

You need to bring your own win10 installation disk (U disk).

When the logo appears at boot, you can continuously click ESC to select the startup item (the product line is different, the entry shortcut key of the startup item is different, ASUS notebook is pressed ESC, desktop or motherboard is pressed F8).

Windows 10, like Windows 8, supports UEFI or non-UEFI boot (Windows 7 does not support UEFI boot).

For this installation of Windows 10, we recommend choosing UEFI mode boot, so that the subsequent partition format is a more advanced GPT format, if you choose non-UEFI mode boot (the fourth item in the figure below), the subsequent partition format is MBR, and up to 4 primary partitions will be created.

Install the system. After selecting Start USB flash drive in the startup item, the boot image begins.

Once you've selected settings such as language, keyboard, etc., select Next

Click "Install Now".

The installer is starting.

In the stage of verifying the key, you can enter the key directly, or you can choose to skip it temporarily.

Agree to the license terms.

Select Custom

Next, partition, [Windows 7 needs to click "Drive Options (Advanced)"].

Click New to allocate the size of the C disk, here 1GB=1024M, and allocate the size according to your needs.

If you need to allocate 100GB for the C drive, then it is 100 1024=102400, and in order to prevent it from becoming, you can add 5-10MB more

Here divide the 127GB hard drive into a partition, click New and click Apply.

Windows will automatically create a boot partition, select OK here.

After the C disk is created, the system reserved disk is automatically generated, so you don't have to worry about it. This partition will be automatically hidden after the system is done, then select the path of system C installation, and click Next.

If you have a lot of areas, don't choose the wrong installation path.

Files are being copied and prepared, and most of the next stages are automated.

Each step in the following figure is done automatically, and then it will be automatically restarted.

Windows will restart automatically, and the USB flash drive can be unplugged at this time.

Windows still loads the process automatically after restarting. During this period, it will be restarted several times, and the setup is being prepared.

When it is ready, it will restart, and it is time to verify the product key, and you can enter it directly if you have a key, or you can temporarily choose to talk about it later.

Quick to get started interface, choose to use Quick Settings.

Wait a moment. <>

At this point, the system is almost installed, create an account and password for this computer, and leave the password blank means that you have not set a password.

Next, Windows this settings app.

Wait for the final configuration to be prepared.

Windows is installed, so please enjoy it.

Automatically jump to the desktop.

1. Use the decompression tool to extract the Win10 original image file to a partition other than the C drive, such as the D drive. Then open the folder by clicking on it.

2. Enter the installation wizard and check the installation environment.

3. In order to speed up the installation process, it is recommended not to update, and set it up later if necessary.

4. Select the version you need to install.

5. Click on the "I Accept" option.

6. It depends on the individual's need to choose whether to keep the personal files for installation.

7. Click on the "Install" option.

8. Start installing the system, there will be multiple restarts during the period, please wait patiently.

9. In this interface, select the "China" option and click "Next".

10. Select this place according to your needs and click "Next".

11. In this interface, click "Skip".

12. Set it according to personal usage.

13. Create one or use an existing one, you don't need to fill in the password.

14. Click on the "Do it later" option.

15. Set up the computer according to your needs.

16. Look at a few slides, do not turn off the computer.

17. Look at a few slides and do not turn off the computer.

18. Look at a few more slides.

19. After a while, you will enter the win10 interface. Congratulations, you have completed the installation of win10 system.

2. Then Cloud Knight will prioritize checking whether the local environment meets the installation conditions, and click Next in the lower right corner after the test is completed.

3、Then you will enter the interface of selecting the system,Select and install win10 home version 64-bit system here,Then click Next。

4. Cloud Knight will recommend common software for installation, and you can choose the software freely, and the selected software can help users install it together when reinstalling.

6. The preparation for system reinstallation has been completed, and then it will enter the installation and deployment state, and after the installation and deployment is completed, click "Restart Now" in the following interface or wait for the computer to restart by itself.

7. Restart the computer and select Yunqishi PE to enter the system.

8. After waiting to enter the system, no need to operate, the cloud knight will automatically open to install the system, you can wait patiently.

Ask a question and then what?

Then use the arrow keys to select up and down, use the enter key to confirm, the software will be installed automatically, press enter to confirm.

Then the reload is complete. It was usable.

Thank you for asking a question [Bixin].

Question: Okay, hard work [agree].

The steps for newbies to reinstall the win10 system are as follows:

Operating environment: Honor Magic Book2020, Windows11 system, System Home Installation Master Edition, etc.

1. **[System Home Installation Master]. **After finishing, close all anti-virus software, and then open the software, and the soft Lu manuscript will be prompted, and after reading it carefully, click I know to enter the tool.

2. After entering the tool, the tool will automatically detect the relevant information of the current computer system, click Next. After entering the interface, users can choose to install the windows1064-bit system according to the prompts, and click Next.

<>4. After restarting the system, the computer will enter a startup item selection, then select [XTZJ Win10 PE] to enter. After entering, the system will automatically perform a backup and restore and wait for it to complete.

5. After the system backup is completed, it will be restarted again, and the system installation interface will be automatically entered, and then the system installation will be completed.

The specific steps are as follows:

Tool: Lenovo Xiaoxin Air 13 Pro, Win10, U disk.

1. First of all, close all antivirus software, and then run the system home installation master software, the software will prompt, after reading carefully, click I know to enter the tool Qin Yingchang.

2. After entering the tool, select the U disk to start at the top to enter the U disk startup disk production interface.

3. Keep the default format and partition format, no need to change it manually. Click Start Making.

4. The tool will automatically prompt whether to start production. Note: The maker will clean up all the data in the USB flash drive and cannot be recovered, please save the important data files in the USB flash drive in advance.

5. After the U disk is made, the tool will prompt and display the shortcut key for the current computer's boot U disk.

6. After the production is completed, you need to test whether the current USB flash drive boot disk is completed. You need to click Simulated Boot-BIOS Boot in the lower right to check whether the current USB flash drive boot disk is successfully made.

7. Wait for a while, and the successful display of this interface is successful.