How do you get rid of the smell of methanol in the room?

The best way to do this is to open the window, which will speed up the release. In addition, formaldehyde dissolves in water, and we can put some water in the house. It can also be adsorbed with activated carbon, which can adsorb formaldehyde and benzene in it.

After sucking it up, we can put it on the balcony to dry it, and the substance inside will be released. Some people put pineapple or sprinkle some perfume, but in fact, this is just to cover the smell and has little effect on eliminating pollution.

Don't worry about excessive formaldehyde in the new house, this is a common problem, but it is necessary to pay attention to it, because formaldehyde has been in the precedent in China's toxic gas ranking, as long as you choose a good response method, you can control formaldehyde within a safe range, the following are several commonly used methods to remove aldehyde, simple and convenient, I hope to help you.

1. Formaldehyde in the new house exceeds the standard, the smell is serious, the first thing to do is to open the window for ventilation, open the wardrobe and drawers at the same time, so that the formaldehyde can be fully released, and then release the formaldehyde to the outdoors through air convection, although this step is simple to operate, but also pay attention to the weather conditions, this method is not suitable for the rainy season and winter.

2. Plants used to be a celebrity in the aldehyde removal industry, and every household will compete to buy some green plants after decoration, so that it can absorb indoor formaldehyde, but in recent years, various major platforms have tested, and the results are not optimistic about plant aldehyde removal, because the formaldehyde in indoor decoration materials and furniture is continuous, and the amount absorbed by plants is far from reaching the release of formaldehyde.

5. Ventilation is an indispensable method for removing formaldehyde indoors, but when the outdoor wind is not strong enough, it is necessary to strengthen ventilation. At this time, you can buy a high-power industrial fan to assist in the removal of harmful gases in the house, which can accelerate the circulation of air inside and outside the house, which is of great help to remove indoor decoration pollution.

6. Formaldehyde will produce faster thermal movement under the action of high temperature, so that formaldehyde is released from the substrate, but it is difficult to completely remove indoor formaldehyde through high temperature, because the release life of formaldehyde is very long, continuous heating is not realistic, and it is also necessary to pay attention to electricity safety in the process of using heating equipment

Ventilation more, add grapefruit peel, etc.

Ventilation is a routine practice, in addition, it is to increase the indoor ambient temperature, accelerate the release of formaldehyde in the board, and then ventilate. And then there's another way, washing the air. This method has been summarized in our long-term experiments, but it has not been well organized.

Seeing that many people on the Internet are paying attention to indoor air pollution, we are also constantly collecting relevant information, and it hurts to see that some families have obvious symptoms and continue to enjoy the pollution of the indoor environment. For this part, let's make a simple method, tell you, as for how much can be removed, I dare not say 100%, but it is definitely very effective.

Formaldehyde is the adhesive in the board, and almost all methods are only for formaldehyde released into the air. Increasing the ambient temperature of the space where the board is located can effectively increase the release rate of formaldehyde in the board.

Activated charcoal, etc., has an effect, but it is relatively slow.

Onions, tea leaves, etc., are masking the taste, and have no effect on the contaminants themselves.

Increasing the amount of fresh air is more effective, but sometimes the cost is very high.

Let's talk about a method, which is very simple, the investment is very small, and the total cost should not exceed 100 yuan.

Principle: Formaldehyde and other harmful gases are easily soluble in water, and this property is used to absorb formaldehyde in the air with water.

Method: In the place where fish farming is sold, buy a few aeration pumps, which do not need to be too big, about 20 or 30 yuan, and buy a few in a few rooms. Note that there should be a pipe and a "nozzle", and then, a few aeration pumps use several basins, and the basin contains about 3 4 water, and then, install the aeration pump, put the "nozzle" in the water, and start the aeration pump.

In this way, small bubbles keep coming out of the sprinkler head. That is to say, how much air enters the aeration pump, and how much air bubbles come out, which is equivalent to washing the air with water, and makes full use of the characteristics of formaldehyde that is easily soluble in water. It also increases the humidity in the room and accelerates the release of formaldehyde in the panels.

Then, in a day or two, the water is replaced...

If you do this for a long time, the indoor air quality should be very good, and the air will be effectively purified.

Disadvantages: benzene series and TVOC are not easy to dissolve in water, only soluble in organic solvents, this is complicated, poor operability, not to mention for the time being.

Finally, once again, remind that the indoor air quality is not up to standard, don't let the child stay, once there is a strange disease, you will regret it.

There are three main sources of pollution in the interior after decoration: 1. Physical pollution: Many experts in the field of air environmental protection of the United Nations have confirmed that eco-grade negative ions (small particle size negative ions) can take the initiative to capture small particles of fine dust, and effectively remove air microns (and below fine dust, and even micro particles, so as to reduce the harm to human health.

Experiments have proved that the smaller the diameter of the dust, the easier it is to be captured by negative ions and condense and settle. 2. Chemical pollution: negative ions can react with formaldehyde, benzene, TVOC and other decoration pollutants in the air to decompose them into carbon dioxide and water.

In addition, due to their small particle size, high activity and long migration distance, eco-grade air anion can reach all corners of the room and remove formaldehyde without dead ends. 3. Microbial pollution: negative ions can reverse the potential polarity of bacteria, viruses and other single-celled microorganisms, making them lose their vital activity, so as to play a positive role in sterilization and disinfection.

The Shenghuan anion fresh air system jointly developed by Abel Technology and Tsinghua University adopts a new generation of anion generation technology to achieve the lowest negative ion generation voltage, the highest active concentration and the farthest migration distance in China, which is far more than 30 times the concentration of eco-grade small particle size anion defined by the WHO clean air standard, which can comprehensively filter and purify outdoor dirty air, so that clean air can release a large number of eco-grade small particle size anion that is easy to be absorbed by the human body while introducing clean air into the room, and quickly and effectively improve indoor air.

The room smells of formaldehyde, so you can choose a good photophyll material, and then ventilate it more after the focus is removed.

1. Activated carbon, a material that can be adsorbed, a good amount of alcoid, this kind of material can be placed in the car at home, used for 3 years, and can be used for light pollution.

2. Plants, plants are generally used more are spider plants, aloe vera, moso bamboo, these plants adsorption is relatively slow 3, not very anxious, you can ventilate during this time, ventilation can discharge the harmful gases released.

4. Photocatalyst, this kind of product is a chemical product, and the choice of photophyll material with better material has a good effect on the new house, and it can be decomposed without ultraviolet rays.

The smell of formaldehyde in the room indicates that the formaldehyde exceeds the standard, which may be the decoration materials at home.

The windows facing the house are all open, which can strengthen the air convection, and in some times when there is no wind and less wind, if the formaldehyde concentration is too large, you can also use an electric fan to strengthen the convection. If you need to use an electric fan, the floor fan is more effective.

Plants have a strong ability to absorb formaldehyde, such as pothos, cactus, spider plant, reed, iron tree, chrysanthemum, etc., usually, large leaf and vanilla plants have a better effect of absorbing formaldehyde, such as spider plant, tiger tail orchid, etc. Formaldehyde is a harmful substance that is released for a long time, and placing some green plants that can absorb it can reduce the formaldehyde content in the room.

Solid activated carbon has the characteristics of many pores, formaldehyde and other harmful substances have a strong adsorption and decomposition effect, the smaller the particles of activated carbon to adsorb formaldehyde, the better the effect of formaldehyde, activated carbon is suitable for placing in small spaces such as furniture, and then cooperate with clear mangreen nano photocatalyst to remove formaldehyde, a week of irregular spraying, formaldehyde can be reduced. It can play a key role in the adsorption and decomposition of formaldehyde.

1.Ventilation to remove formaldehyde: Ventilation to remove formaldehyde can remove formaldehyde in the air indoors, but once the doors and windows are closed, the formaldehyde hidden in the floor and cabinets will volatilize into the air!

Therefore, if the smell of formaldehyde in the house is strong, it should be ventilated frequently. 2.Green plants absorb formaldehyde:

Green plants such as pothos, spider plants, etc. can adsorb formaldehyde around themselves, but they should be rinsed and cleaned regularly, otherwise formaldehyde will also harm the plant itself. 3.Activated carbon adsorption:

Activated carbon can effectively produce the purpose of noisy leakage and adsorption of formaldehyde, and can be placed in the cabinet with a large formaldehyde smell, but it should also be replaced regularly, otherwise it will also cause secondary pollution. 4.The air purifier and fresh air system use high-tech hand lifting section to regulate the indoor air, which can not only remove formaldehyde, but also effectively prevent pollution.

However, it is more expensive, and the general cost of Huachang equipment is about 2-3,000 yuan.

Hello, 1.Ventilation: Opening windows for ventilation can effectively help methanol odor dissipation and reduce odor.

2.Activated charcoal: Placing activated charcoal in the affected area can absorb methanol from the air and reduce odors.

3.Lemon juice: Spraying lemon juice on foul-smelling areas can neutralize the taste of methanol.

4.Water: Methylgositol can be flushed off by pouring water over a contaminated surface.

5.Table salt: Sprinkle table salt on the affected surface to absorb and reduce the taste of methanol.

6.Deodorant: The use of a special deodorant can quickly remove the smell of empty alcohol.

The smell of furniture methanol is too large and can be removed by the following methods:

1. Open more windows for ventilation. It is best to choose morning and evening for ventilation of doors and windows, try to avoid noon, and it is recommended to ventilate for 3 to 6 months to remove the methanol of furniture.

2. Absorb with plants. Plants such as cactus, spider plant, aloe vera, and tiger tail orchid are placed indoors, and the plants can absorb a lot of harmful substances such as methanol, helping to eliminate the smell of methanol in furniture.

3. Fill the container with cold water, then add an appropriate amount of vinegar and put it next to the home-heng wangji, and open the window for ventilation to remove the smell of methanol from the furniture.

Go to the taste of the new bed:

It is best not to put the new bed into use immediately after it is bought, it is best to place it in an empty room, close the door, but open the window, so that you can increase the air circulation and let the smell of the new bed escape. In general, it is best to leave it for more than 1 month.

You can put more greenery in the room where the new bed is placed, such as spider plants, pothos, and cacti. The effect of spider plant absorbing formaldehyde is very good, and you can place more spider plants in this room where the new bed is placed in the middle section, which is not only beautiful, but also very useful.

In addition to the spider plant, you can also place some grapefruit peel on the new bed, which is a method often used by Cantonese people; It is a pity that most people often lose the peel of grapefruit after eating the flesh of grapefruit. Grapefruit peel also removes odors from the refrigerator.

Formaldehyde scavengers can be used, we use formaldehyde scavengers to treat the real bed first, and then put some activated carbon for continuous adsorption, which can not only remove formaldehyde, but also remove the smell of the bed.

Use an odor remover to spray directly on odorous air or apply to the surface of odorous materials. The main ingredients of the odor remover are extracted from natural plants, which do not contain organic solvents and harmful substances, and are not harmful to humans and animals.