Which is better, full body brick or glazed brick? How to choose?

The difference between all-over brick and polished tile – the color is different.

It is understood that the color of the polished brick is relatively single, and there is almost no big change, and the various colors of the brick surface will not differ too much. But the all-over brick is different, its color is richer than that of polished tile. Because the whole brick is a glaze after printing the pattern, the color will be more vivid, and it is completely unrestricted.

The difference between full-body bricks and polished bricks - the brick embryo is different.

As we all know, bricks are the key place to distinguish between full-body bricks and polished tiles. It is understood that the polished brick is to infiltrate the color into the brick, so the color of the brick 1-2mm below the surface is the same as the surface. But the whole brick is not used at all, because it will not penetrate into the brick at all, so look at the side of the brick, the whole brick layering will be more obvious, and the glaze can be clearly seen.

So, if the glaze has a thin layer of color, we can be sure that it is a full-body brick.

The difference between all-body bricks and polished tiles – the wear resistance is different.

The whole body brick is to add a layer of glaze on the surface of the polished brick, compared with the after, it has the characteristics of good brightness and good transparency, but its wear resistance is not as good as that of the polished brick. The surface of the polished tile is very thick and wear-resistant. Although the surface of the glazed brick is a layer of glaze, it is very thin, but the wear resistance is not so strong.

Sonia.

Which is better, all-body brick or porcelain throwing brick, whether it is good-looking or durable, you will know how to choose all-body brick and glazed tile after reading this.

1. Compare from the wear resistance.

Since the whole body brick is calcined at high temperature, the wear resistance will be higher and have enough hardness, while the glazed brick is slightly worse in surface hardness due to the glazed relationship, so in terms of wear resistance, polished brick is much better than glazed brick.

2. Compare from the pattern style.

The color system of the whole body brick is relatively monotonous, and there is not much change, and the glazed brick is poured with a layer of glaze after the pattern is printed, so in terms of color and pattern, the glazed brick is much brighter, and at the same time, any pattern style of the glazed brick can be selected by itself, which is truly tailor-made.

3. In terms of details.

The texture and details of the whole brick are relatively simple, and its texture and pattern can not be refined, and the glazed brick can not only be done, but also can be said to be fake and true in imitating the delicate texture, so when purchasing, you can judge the polished tile and glazed tile by observing the side to see if there is obvious layering.

All-over bricksThere are pros and cons of glazed bricks, mainly depending on where they are used, and the specific analysis is as follows.

1. The whole brick is mainly made of rock chips pressed by high pressure, so its surface is very hard after polishing, and it has good wear resistance and low water absorption. Full glaze is also known as full glaze color.

is a traditional polished brick.

The product of glazing and then polishing on the surface, so the pattern of the whole body brick and the full glazed brick is richer than that of the full glazed brick.

2. There is also a difference in the size of the glazed bricks and the whole bricks, and the general size of the glazed bricks is the large tiles.

And the whole body brick is generally a small floor tile of 300.

3. The full-glazed brick uses a multi-layer special manufacturing process, which can reduce the material loss by 90% compared with the polished brick. In general, the comparison between the whole body brick and the full glazed brick has its own advantages and disadvantages, as for the appearance of the pattern and color, it is generally each flower, so there is nothing to compare. When purchasing, it is mainly necessary to look at the application occasions of full-body bricks and full-glazed bricks.

Full-body bricks and glazed bricks have their own advantages and disadvantages, it is recommended that you choose according to your personal needs and preferences, and it is more important to suit yourself.

1.Advantages of all-over bricks.

The whole brick is a kind of brick made of polished embryo body, with smooth surface, hard and wear-resistant, good anti-slip property, suitable for kitchen, bathroom and balcony and other spaces with high anti-slip requirements.

2.Advantages of glazed bricks.

Throwing glazed bricksIt has its own advantages with full-body bricks, with high density, wide range of use and good water absorption, while glazed bricks have good surface brightness and better stain resistance.

1. The density of the tile

The whole body brick is far better than the glazed brick.

When buying a tile, in fact, you will generally pay attention to the density of the tile. Choose the floor tiles.

The higher the density, the better, which means that the lower the water absorption rate of this floor tile, the higher the durability. For full-body bricks and glazed tiles, full-body bricks are high-density and low-water absorption tiles. However, glazed tiles are tiles with high water absorption and low density.

Therefore, in terms of density, the whole body brick is far better than the glazed brick.

2. The brightness of the tile surface

Glazed bricks are better than full-body bricks. For the whole brick, the section after cutting will find that it is completely consistent from the inside to the outside. Therefore, it is called a full-body brick.

It is also generally called unglazed brick, and the color of the front and back materials is consistent. At the same time, due to the rough surface of the whole brick. So its surface is generally not particularly bright.

The glazed tile is applied to the surface of the tile, so its color is very bright and the brightness is very high. The effect of glazed brick color is better than the whole brick.

3. Anti-fouling angle

Glazed bricks are also better than full-body bricks. Because we lay tiles at home, in fact, from a large angle is to consider the problem of hygiene and cleaning, so at this time, we will consider the anti-fouling performance of the tile itself. In terms of anti-fouling, glazed bricks are better than our full-body bricks.

Because the surface of the glazed tile has a dense layer, it is very smooth and clean, and the anti-fouling ability is very strong.

However, the whole brick is far inferior to the glazed brick in this aspect, and the surface of the whole brick may have pores after polishing, and there is a situation of hiding dirt and dirt.

4. The angle of the use part

Full-body bricks are better than glazed bricks. For each type of tile, in fact, it has a specific suitable part. This is what we often call wall tiles and floor tiles.

It is important to understand here that glazed tiles are generally wall tiles. Glazed bricks cannot be laid on the ground because of their poor density and lack of wear resistance.

And the all-over brick generally refers to the floor tile. However, the whole body brick can also be pasted on the wall, that is, the floor tile on the wall is completely available for the whole body brick. For example, a lot of full-body marble is pasted on the wall, and the effect is very good.

5. Water absorption angle

The whole body brick is far better than the glazed brick. For any kind of ceramic tile, there is a test of its water absorption rate when it is tested at the factory. At this time, there are generally three situations, namely high water absorption tiles, medium high water absorption tiles, and low water absorption tiles.

From the perspective of water absorption, the water absorption rate of the whole body brick is very low.

The water absorption rate of glazed bricks is relatively high. But please note that the water absorption here refers to the water absorption rate of the back of the tile. Therefore, from the perspective of waterproofing, I personally recommend that you choose full-body bricks to pave the floor of the bathroom, and the walls can be paved with glazed tiles.

1. Full-body ceramic tile is a large category of name, which refers to the same color as the bottom of the embryo and the brick fabric, and the glazed brick and antique brick have the whole body of this style.

2. The whole body tile can be said to be an upgraded version of the glazed brick, which solves the problem that the surface hardness of the glazed brick is not enough, and the bottom of the brick exposed after processing and cutting is easy to blacken!

6. There is not much difference in the quality of the whole body brick and the porcelain brick, the process is not the same, the comparability is not large, and the choice still depends on the style and the position of use. Both the wall and the floor can be used, but when it comes to processing, the whole brick is more suitable if the bottom of the exposed brick is required!

Ask what bricks are used for the indoor floor.

Answering the polished brick, compared to the whole body brick, the surface of the polished tile is much smoother. Polished tiles are hard and wear-resistant, and are suitable for use in most indoor spaces except toilets and kitchens, such as balconies, exterior wall decorations, etc. On the basis of the use of seepage technology, polished tiles can make a variety of imitation stone and imitation wood effects.

Anti-wood grain bricks, anti-wood grain can not only be easily matched in the living room, bedroom, corridor and other main spaces, even if it is a balcony, kitchen, and even a bathroom that is not suitable for paving wood floors, you can use imitation wood grain bricks to replace and match. Therefore, the special properties of this feeling tile determine its wide use, that is, it can present the effect of wooden flooring, and it will not be very troublesome in cleaning.

There are still a lot of differences between the whole body brick and the throwing shaft brick, because the color of the full throwing shaft tile is much higher than that of the barrel, and the surface of the glazed brick is very smooth, the surface smoothness of the whole body brick is completely inferior to the through shaft brick, and the degree of wear resistance is also different, the glazed brick is a special formula that can be carried out on the desktop The whole body brick can make a variety of antique imitation wood effects.

There are still a lot of differences, and the color of fully glazed tiles is much higher than that of barrels. Moreover, the surface of the glazed brick is very smooth, and the surface smoothness of the whole brick is completely inferior to that of the glazed brick. In addition, the degree of wear resistance is also different.

Friend brick is a special formula that can be used in the glaze to carry out a whole body process. The whole body brick can make a variety of imitation stone and wood imitation effects.

Full-body bricks and glazed bricks are good, each with its own advantages. The following is a comparative introduction to all aspects of this brick:

1. Scope of application.

The glazed brick is also widely used, such as walls, floors, kitchens, bathrooms, and the choice of space is also relatively large, and the surface is seamless splicing, so it is basically not afraid of fragmentation in daily life, and various creative shapes can be designed during the construction process, which is also suitable for a variety of styles.

Full-body bricks, compared with glazed bricks, are not as good as glazed bricks in color, and the style is relatively single, but now many families like simple and modern style, so full-body bricks are also very popular with the public, and the range of use is also relatively wide, such as aisles, paving, and halls, etc.

2. Wear resistance.

The all-over brick is hard and wear-resistant, and is suitable for use in most indoor spaces except toilets and kitchens, such as balconies, exterior wall decorations, etc. On the basis of the use of seepage technology, the whole body brick can make a variety of imitation stone, imitation wood effects.

Glazed brick is a kind of special formula glaze that can be used on the glaze surface for the whole body process, the glaze surface is smooth and bright like the whole body brick, and its glaze color is rich in patterns like antique bricks, and the color is thick or gorgeous.

There are still a lot of differences between the whole body brick and the throwing shaft brick, because the color of the full throwing shaft tile is much higher than that of the barrel, and the surface of the glazed brick is very smooth, the surface smoothness of the whole body brick is completely inferior to the through shaft brick, and the degree of wear resistance is also different, the glazed brick is a special formula that can be carried out on the desktop The whole body brick can make a variety of antique imitation wood effects.

From the current trend, the glazed brick is good, the color and brightness are good, but it is also higher than the whole brick.

Compare glazed bricks and full-body bricks, I hope to help you in decoration.

Hello this, I think the glazed brick is more durable and good-looking.

Pro, if you want to compare the two ceramic tiles, I prefer to throw glazed bricks, to cover the advantages and disadvantages of all-over bricks and glazed tiles: all-over bricks: advantages:

1.Strong durability, not easy to wear and tear, not easy to break. 2.

The construction is simple and does not require much technical expertise. 3.The color is rich and not easy to appear.

4.It is safe and does not contain toxic ingredients. Cons:

1.The quality varies, and some brands are not of good quality. 2.

The price is higher, and it is more expensive than glazed tiles. 3.Since there is no glaze on the surface, it is difficult to clean.

4.The anti-slip ability is slightly lacking, and it is easy to slip. Throwing glazed bricks

Pros:1The surface glaze is smooth and easy to clean.

2.Strong anti-fouling ability, not easy to penetrate pollution. 3.

The shape is beautiful, the color is many and the pre-sample. 4.Strong anti-slip ability, not easy to slip.

Cons: 1It is more fragile than full-body bricks and is easy to be smashed.

2.It is not resistant to corrosion and is susceptible to chemical or acid and alkali attack. 3.

The price is relatively high, more expensive than full-body bricks. 4.Because the glaze is non-slip and easy to slip on, it is not recommended to use it in some places that need to be non-slip.

Therefore, the choice of full-body brick or glazed brick should be decided according to actual needs. If you need better durability, you can choose all-over bricks, and if you need to be beautiful and easy to clean, you can choose glazed bricks.