What do you think of the S bend when learning to drive? How to see the point of the driving test S c

When the students take the S bend, the most important thing is to control the speed of the car, maintain the same speed when doing each action, not fast and slow, when driving, because everyone's height and body shape are different, everyone looks at the point is different, every time you open to find the most suitable point for yourself, in this case, you will have no problem in the exam, and share your skills in the S-bend.

Method 1: When you hear a prompt tone"Go over the S curve"When commanding, hang a gear, slowly lift the clutch to make it in a semi-linked state, and keep the speed of the car slow and uniform to the corner.

After the car enters the curve, when the middle of the front of the car is aligned with the outside line, it starts to make a circle and a half to the left, and then makes a slight adjustment. When the front of the car is in the middle of the road, return to the right direction. When the middle of the front of the car is aligned with the outside of the road again, start to make a circle and a half to the right, and then make a slight adjustment.

When the car is back in the right direction, you can drive all the way out.

Method 2: When the left seat angle of the front of the car is aligned with the arc of the street lamp on the right, the steering wheel turns one and a half times to the left and moves forward. It is mentioned in the small road test S curve test skills that when the left seat angle of the front of the car is aligned with the arc of the left street lamp, the steering wheel will make a circle to the right and a half.

When the right seat angle of the front of the car is aligned with the arc of the street light on the left, the steering wheel turns to the right for a circle and a half. When the left radial line of the front of the car is aligned with the white circle on the ground, the steering wheel makes a circle to the left and half back to the right, moving forward. Finally, when the front of the car is aligned with the white horizontal line on the ground, the steering wheel turns a circle and a half to the left, and the left turns are taken to complete the test.

Method 3: Look at the left and right mirrors on the left and right lines, always keep the vehicle in the center, look at the diagonal, turn right with the left corner of the car to the right line, turn left with the right corner of the car to the left line, and follow the line.

The above is my own summary of the S curve exam skills, especially need to remind novices that when walking the S curve, the slow word is the head, always let the clutch out of the semi-linked state, in addition to do not press the road floss, after entering the curve, try to walk a large circle, so as not to pass the front of the line, the exam is unqualified. Good luck with your exams.

Automobile driving test teaching: the most intuitive highlight of S bend is here, and new students hurry up to collect it!

1. The first point: After entering the S curve, pay attention to the observance, when the hood overlaps with the arc on the right, make a circle to the left.

2. The second point: the vehicle continues to move forward, when the left front of the car overlaps with the right arc, hit the left half a circle direction, and then make a slight adjustment to keep the front of the car always overlapping with the arc.

3. The third point: before entering the right turn, pay attention to the alignment of the left front of the car with the left arc and return to the right direction.

4. The fourth point: the vehicle enters the right corner, and when the third third of the hood of the left front of the car is in an arc alignment, make a circle to the right.

5. The fifth point: continue to observe, when the right side of the car overlaps with the left arc, start to play half a circle to the right, and then make a slight adjustment to keep the front of the car always overlapping with the left arc.

1. First of all, let's let the test car enter the curve along the middle of the curve;

2. The first point: when half of the front of our car covers the right sideline, the steering wheel begins to hit the left;

3. After a lap, the position of the left light of the car is just along the sideline, and it is necessary to adjust it flexibly, and there is no time limit for the S curve, so our test car speed must be controlled as slowly as possible, and it should be noted that it is not possible to stop;

4. After the first bend goes out, we need to look at the second point, when our left headlight hits the left edge line, at this moment, pay attention to the steering wheel in time;

5. The third point, when our right car light sticks to the left edge line, the steering wheel needs to hit the right side, at this time, as long as our right side of the car light has been along the edge line, pay attention, at this time, we should pay attention to avoid the right rear wheel line, we can look at our right rearview mirror;

There are fixed standards for the field settings of curve driving, which is basically a wide meter, and the radius of the curve is about one meter, with two consecutive curves. <>

Operation skills: 1. Before the car enters the curve, straighten the body and prepare to enter the curve, as close as possible to the right sideline, because the first turn is to the left. <>

2. When the left corner of the front of the car coincides with the right sideline, make a circle to the left, and then drive slowly.

3. The left corner of the front of the car exceeds the sideline, adjust the direction slightly to the left, look at the left rearview mirror, you can see the distance between the body and the left side line from the mirror, and correct the direction by a small amount to keep it at about 30cm.

4. The left corner of the front of the car coincides with the left sideline, back to the positive direction, at this time, look at the small mirror in the front right corner of the front of the car, and see that the body and the right side line are kept about 30cm.

5. The right corner of the front of the car coincides with the left sideline, make a circle to the right, and drive slowly.

6. When the right corner exceeds the sideline, adjust the direction to the right slightly by 90 degrees, continue to drive, return to the right direction, and drive out of the test area. <>

Precautions: 1. Control the speed.

Before entering the curve driving project, you should slow down and sense the speed of the car in advance, so that you will not be in a hurry after entering the corner. When pressing the clutch, try to slow down the speed and increase the reaction time, so that even if the direction is slightly biased, there is room for correction and will not press the line.

2. Remember the principles.

Curve driving generally has left and right rearview mirror method and a third of the car cover and other methods, each coach teaches the method is not necessarily the same, but mainly in accordance with the principle of "left turn to right, right turn to left, speed to be slow, direction to be fast".

It is worth noting that no matter which method, the coach teaches according to the student's own situation, and the student must follow the coach's guidance and practice flexibly when practicing.

3. Know how to observe.

When crossing the S curve, always look at the line on the left or right. Generally speaking, the rear wheels are the ones who will press the line, which requires the students to observe the rearview mirror more when driving, and cooperate with the speed of the steering wheel. Students should observe the position of the car and the line of the body, and adjust the point for fine-tuning according to their own situation to prevent recurrence.

1. When driving on a curve, you need to adjust the body, and before entering the curved driving lane, the front of the car should be aligned with the middle of the lane as much as possible;

2. In the running process of the car, when the right side of the car 1 3 intersects with the right side line of the lane, it means that the front of the car has entered the curve driving lane, and the front left corner of the front of the car is observed;

3. From the cockpit position, when the left front corner of the front of the car coincides with the right sideline, make a circle to the left to keep the left front corner of the front and the right side line always coincide;

4. When the left front corner of the front of the car coincides with the left sideline, return to the positive direction;

5. In the process of traveling, when the front right corner of the front of the car coincides with the left sideline, make a circle to the right to keep the front right corner of the front and the left sideline;

6. In the process of curve driving, it is necessary to observe the distance between the vehicles on both sides through the rearview mirror, approach the exit of the curve, aim the front of the car in the middle of the lane, and slowly return to the positive direction.

Attached: Precautions for curve driving:

1. When driving in a curve, you should slow down in advance and keep to the right when driving into a curve.

2. In the process of traveling, the use of braking should be avoided, especially the use of emergency braking.

3. The control of the steering wheel should be done well, the amplitude should not be too large when adjusting the direction, and the steering wheel should not be turned too fast and too fast.

4. Since the novice trainees do not feel very good, they should choose a route with a large turning radius as much as possible in the process of curve driving.

Drive the S line of subject 2, and when the front of the car enters the S line, align the window grille on the second rib of the window on the yellow line, and the window grille can be completed by keeping it on the yellow line.

If you're studying at a driving school, your instructor will definitely tell you what kind of reference point to choose. You just need to follow the instructor's instructions to practice.

<> driving method of S-shaped curve: 1. When you first enter the S-curve, you should let the car be in the middle of the curve as much as possible; 2. In the curve, the left side of the car is far from the bending line width on the left steering wheel, and the right side is far away from the right side of the steering wheel; 3. When the Xunfeng Bureau encounters a narrow section in the middle, don't panic, don't adjust the steering wheel too much. The steering wheel rotates with the square direction of the curve, and when the eye sees it, the hand can naturally follow it.

If your attention is on the steering wheel, it's easy to press the line. During the whole process, let the speed of the car slow down as much as possible and control the speed of the car. If the speed is too fast, it is easy to step on the line if the reaction is not timely, and the vehicle is easy to stall if the speed is too slow.

1. First of all, the vehicle drives to the entrance of the curve and adjusts the vehicle on the road. When the car enters a curve, try to get as close to the right-hand sideline as the first curve is to turn left.

2. When the front corner of the small rearview mirror on the left side of the front of the car, press the right sideline, and immediately make a circle to the left.

3. After playing a high lap on the left, always observe the front left corner of the front of the car to press the sideline, if there is a deviation, the steering wheel is controlled between 90 degrees to correct, and the sideline can be pressed.

4. When you turn right at the junction of the curve, return to the right direction.

5. After returning to the right direction, the front corner of the small rearview mirror on the right side of the driving car is close to the left sideline, and the right direction is circled, and the operation method is the same as the left turn, and the direction of the balance is corrected to drive out of the corner.

6. Drive out of the curve and finish.