How to zero the Haval H7 maintenance lamp, and how to reset the new Haval H7 maintenance lamp

How to zero the Haval H7 maintenance lamp:

When the engine is turned off, press down the short-range distance counter reset button under the tachometer and hold down, put the ignition switch in the ON position, let go of the short-range distance counter reset button, the "Service" sign appears on the display, pull out the minute button on the clock, turn the minute button to the right, the mileage display appears on the display, turn the engine off, remind the information to reset, the ignition switch is placed in the ON position, and the "Service" sign disappears.

1. First press the start button of the car to start the Great Wall new Haval H7 car.

2. Click the MENU button on the left side of the steering wheel of the Great Wall new Haval H7 car.

3. Maintenance tips will appear on the dashboard of the Great Wall new Haval H7 car below.

4. Next, click the OK button on the left side of the steering wheel of the Great Wall new Haval H7 car.

5. Finally, the Great Wall new Haval H7 car can complete the zero setting of the maintenance light.

Hello, after the car maintenance indicator goes to the 4S shop for maintenance, the staff of the 4S shop will connect to the computer after the maintenance is over.

If the maintenance light of this car is zero, you need to go to the store to maintain it, and you can connect it to the computer to eliminate it for you after completion.

Hello, for the maintenance tips of this model, they must use the decoder to eliminate, if your car has not been maintained, you can go to the next time to maintain and eliminate it.

Generally speaking, after your maintenance is over, you can ask the staff of the 4S shop to reset it through the computer.

In this case, you can ask the staff of the 4S store to help you clear it with professional instruments after the maintenance is completed.

This is generally after the maintenance of the staff of the 4S shop to help you eliminate it on the computer, and you can't operate it manually.

It is recommended to go directly to the 4S store to deal with it.

There are two ways to zero the maintenance lamp of Haval H6: First, manual zeroing. Second, the instrument is zeroed.

First, manual zeroing steps:

1. Turn off the key and press the button at the bottom right of the dashboard without letting go.

2. Turn on the key until the instrument light is fully on, you will find that the small wrench on the dashboard is not flashing.

3. Release the button, and then press the dashboard button at the bottom left, and you will find that the small wrench is gone.

4. Zeroing is complete.

Second, the instrument is zeroed.

To the 4S shop with a special detector, the dashboard displays the "service" sign, indicating that maintenance is needed, at this time, after the maintenance is completed, the maintenance technician will use the instrument to do a zero reset work, it is recommended that you use this method better.

1) With the engine turned off, depress the short-range distance counter reset button under the tachometer and hold down.

2) Put the ignition switch in the ON position, let go of the short-range distance counter reset button, and the "Service" sign will appear on the display.

3) Pull out the minute button on the clock and turn the minute button to the right, and the mileage display will appear on the display.

4) Turn off the engine and remind the message to reset.

The steps to zero the Haval F7 oil maintenance lamp are as follows:

1. Turn off the ignition switch to keep the engine in a state of flameout;

2. Press and hold the reset button of the short-range distance counter under the tachometer;

3. Turn on the ignition switch and release the short-range distance counter reset button;

4. When the "service" sign appears on the display screen, pull out the minute button on the clock;

5. Turn the minute button to the right until the mileage appears on the display;

6. Turn off the ignition switch, and the maintenance lamp can be reset to complete.

After the car is re-ignited, the "service" is marked as an hour, indicating that the car has been reset successfully.

Haval F7 maintenance intervals.

The regular maintenance table in the Haval F7 maintenance manual indicates that the car needs to be serviced every 5,000 kilometers or 6 months; If the car is driving in a harsh environment, then the maintenance interval should be shortened accordingly.

The function of the maintenance light is to record the mileage of some important accessories, just like a timer in a sprint race, and play a role in reminding car owners and car maintenance personnel. The maintenance light is on, indicating that the car needs to be serviced.

Benefits of maintenance.

1. Regular maintenance of the car can improve the performance of the car and prolong the service life of the car;

2. Fuel saving, the relevant car maintenance test plan says that the car can save fuel in the process of driving if the car is properly maintained;

3. Reduce emissions, the same car maintenance test plan said that after the maintenance of the whole vehicle, when the car is idling, the CO emissions are reduced.

Summary. Hello, the new Haval H7 maintenance light zero method: when the engine is turned off, long press the short-distance counter reset button under the tachometer, turn on the ignition switch, and release the short-distance counter reset button.

When the maintenance sign appears on the display, pull out the minute button on the clock, turn the minute button to the right, and turn the ignition switch off to zero after the mileage is displayed on the display.

Hello, the new Haval H7 maintenance light zero method: when the engine is turned off, press and hold the short-distance counter reset button under the speedometer, turn on the ignition switch, and release the short-distance conglomerate counter reset button. When the maintenance sign appears on the display screen, pull out the minute button on the clock, turn the minute button to the right, and turn off the ignition switch to zero after the mileage is displayed on the display.

Haval H7 maintenance lamp zero method: when the engine is turned off, long press the short-distance counter reset button under the tachometer, turn on the ignition switch and release the short-distance counter reset button. When the maintenance sign appears on the display, pull out the minute button on the clock, turn the minute button to the right, and after the mileage is displayed on the display, the Congratulations Bureau turns off the ignition switch and returns the maintenance light to zero.

When the service sign appears on the display, pull out the minute button on the clock, turn the minute button to the right, and after the mileage display appears on the display, turn off the ignition switch to complete the maintenance light to zero.

The maintenance light is a reminder function set by the car factory for the owner to set according to a certain mileage or time, and reminds the owner to carry out maintenance in the form of instrument or screen information or indicator lights. The maintenance lamp is reset to zero, that is, after the maintenance is completed, a reset is carried out on the reminder information, that is, the information is re-aligned.

The original intention of the car maintenance light is to remind the car owner to do maintenance as soon as possible, then the owner should go to the 4S shop for maintenance as soon as possible, and after the maintenance is over, the 4S shop will reset the maintenance light for the vehicle through the fault diagnostic instrument. The fastest and most accurate way to eliminate the maintenance of the prompt light is to use the fault diagnostic instrument, the owner generally does not have this kind of equipment, it is recommended that the owner go to the 4S shop to eliminate the prompt light after maintenance or to the outside 4S shop to eliminate.