ATI graphics card overclocking, fan acceleration issues.

The graphics card is overheating, it shouldn't have much to do with the war3 you play, you 9600x it's enough to play that game, it should be a matter of the graphics card driver, find a driver on the Internet, catalyst general, there should be no problem.

As for the bounce to the desktop when you play a game, it should be a matter of the system, and it should be good to change the system, try this driver.

Fan acceleration is free The fan of the graphics card is originally running at full load Unless you are changing a fan to see if the fan is very crepe when it turns, remove the fan and add some sewing oil to clean up the dust on it.

It's impossible, this one really doesn't, unless you change the graphics card fan, or if you have enough meters, change the graphics card, buy a 9600gt, about 500, or 9800gt, around 700, and the above two graphics cards specialize in gaming.

The comprehensive point is the A card's HD3850 series or above, games + movies + drawings are all available.

The fan has a limit speed... It's usually running at the limit speed so... There is no relationship between the drive and the fan speed.

The ATI drive is always imperfect, just install a catalyst and everything is OK! Mine was the same before, try it!

1. Click Shut Down in the start menu of your computer, as follows.

2. Then press [Delete] and press Power On, as follows.

3. Enter the BIOS and select [Advanced Mode(F7)].

4. Select [AI Tweaker] at the top, as follows.

5. Select [AI Overclock Tuner] as follows.

6. Then select [XMP] on the right side, as follows, then press F10 to save. XMP is turned on.

Here's how to overclock AMD CPUs:

If it can't be opened, or there is no data after opening, it can only mean that the motherboard is not supported, if it can be opened normally, continue to look down.

Click on the Clock voltage in the "Performance Control" menu on the left. The target velocity in the upper left corner is the current frequency of the CPU, and the purpose is to change it so that it breaks through the original frequency, how to modify it? Read on.

In the lower left half of the face there is a box for the clock frequency. There is an HT reference frequency in the box, this is the external frequency of the CPU, what needs to be changed is it, click the mouse on which sliding box, move slowly, generally increase by 5 The increasing value is as small as possible, because after all, overclocking has a relatively large load on the CPU.

After increasing the value of the HT reference frequency, in looking at the target frequency, is it increasing, this time is not over, click on the application in the lower right corner, the interface will be stuck for a while, if the frequency of overclocking is too high, the computer will restart directly, so the frequency of overclocking should be slowly increased, to determine that the CPU can withstand it, and slowly increase the frequency. Well, after clicking Apply, click OK and you're done.

AMD that can be packed, opened, and packed

Since it didn't reach 3GHz, I asked him to return it, but I didn't negotiate.

However, this has a very strong relationship with your power supply, and the instability of your power supply greatly affects the stability of overclocking and normal use.

1-It is related to the physique of your motherboard, Onda is micro-processed by Jie, which is a channel goods;

2- Ultra is already good, after all, it is a 45nm processor;

3- There will be some minor problems if there is too much, and stability first should be considered.

There is no inevitable connection between open core and overclocking Do you not turn on nuclear energy overclocking If it is, it means that turning on the core affects the stability of your CPU If not, it means that this CPU is not suitable for overclocking Besides, you are all What frequency are you still overclocking In the past, single-core Pentium Celeron or something Because the main frequency is low, it makes sense to overtake it Now the main frequency is so high It's all quad-core Your overclocking basically has no effect It's just a little cooler.

Computer overclocking science AMD overclocking beginner tutorial is super detailed!