Overclocking the CUP, the way to overclock the graphics card, the way to overclock the CPU

1.Open the registry: Enter regedit2 in "Run".

Open it next: [hkey local machine software nvidia corporation global nvtweak].

3.Create a new DWORD and name it Coolbits4Change the value to 3.

5.If you go into the graphics card settings, you will find that there is an additional option where you can overclock.

Ultra CPU is carried out by adjusting the external frequency.

Usually, the BIOS of today's motherboards comes with an external clock adjustment function.

Here's how:

If you are 100 external frequency, you can increase 10MHz, that is, 110 boot to see if the software is normal, and then slowly tend to increase.

For example, it has reached 125mh and the machine cannot be turned on, you can use the method of increasing the voltage to support 125mh.

For example, the voltage that turned out to be, you can adjust it appropriately to , and so on.

The best way to use a super graphics card is to use 3-party software, for example, powerstrip has a step-by-step tutorial.

Methodological steps. Overclocking a CPU in the BIOS generally makes your CPU get the highest value by increasing the CPU's external frequency or frequency doubling (which is what we often call overclocking).

1.Start the computer and press the [DEL] key to enter the main BIOS settings interface.

2.Select the "Frequency Voltage Control" item in the main menu and press Enter to enter.

host CPU dimm PCI clock: specifies the external frequency of the CPU.

CPU Clock Ratio" to set the CPU multiplier.

Change the external frequency: Move the cursor to the "Host CPU Dimm PCI Clock" option, and then use the [Page Up] key or [Page Down] key to change it, in general, its value can be adjusted from 100 MHz to 133 MHz.

Taking NVIDIA's graphics card as an example, here's how to overclock through the N card overclocking software, NVIDIA Inspector

Run the installed software, click the display overclocking at the bottom of the main interface to see the overclocking interface, basically Chinese display, most people who have some knowledge of hardware can understand.

The first is the frequency of video memory,Generally, you have to go online to see how much value is appropriate,You can add it little by little,If there is a problem, there will be a blurred screen,Crash。

The second is the core frequency, the same reason, but the amplitude of this addition will be smaller, not much each time, and the other is the same as the memory frequency.

The last one is voltage regulation, which the software detects from the bottom of the boot program to the highest and lowest levels, these two values are the voltage range in which the GPU chip operates, if it is below this voltage may cause unstable operation, if it is too high, it may burn the chip.

Since the normal amplitude of overclocking almost does not require the help of voltage control, and the large adjustment of the voltage increases the probability of the display chip burning, it is not recommended for ordinary users to adjust this voltage significantly.

The leftmost one is the fan speed, if you want to overclock, you must turn on the fixed fan speed, which is generally determined according to the overclocking amplitude (the minimum is more than 70% and the highest can be 100%).

It is recommended that you can turn off the overclocking software or use the downclocking when dealing with general daily applications, which is good for the life and power consumption of the graphics card.

After the adjustment, you can directly click on the frequency and voltage, and it can take effect.

1 minute to teach you how to overclock your CPU.

It's okay not to overclock, even if the model supports it, if the power supply is not of good quality, it is easy to burn the graphics card, and overclocking is very limited to the display effect.

msi afterburner：

Afterburner is a graphics card overclocking software launched by MSI, which supports the full range of AMD and NVIDIA graphics cards. In addition to allowing gamers to adjust the graphics card frequency and fan speed parameters, they can also enable the GPU core voltage adjustment function. In addition, the software offers a lot of extended features, such as replacement**, screenshots, screen recordings, and more.

First of all, it depends on what the graphics card is, whether it can be overclocked, secondly, the motherboard must support overclocking, and finally the power supply must be sufficient.