How to open a wifi hotspot in windows10

Win10 setting up wifi hotspot is set by changing the adapter, the specific method steps are as follows:

1. Click the network right button on the desktop, and click Change adapter settings in the window that comes out.

2. Right-click on WLAN and then click Properties.

3. After entering the WLAN properties interface, click the sharing option, and check Allow other network users to connect through the Internet connection of this computer. Then under Home Network Connections, select Tron Hotspot Virtual NIC.

The method of creating a wifi hotspot in win10 is as follows:

First, turn on the wifi switch.

1. Generally, there are wifi switches on both sides, and you can move the switch to the side.

2. Or right-click the network icon on the desktop to open the network sharing center, change the adapter settings, right-click on the wireless network, and enable.

3. Click the network icon in the lower right corner of the desktop, then wifi and local connection will appear, click to turn on wifi, then click on wifi to connect, enter the password, click to connect on it.

Second, third-party software. Open the browser**360 free wifi, and then install, open it after installation, and then you will see the password and user name you set, and you can connect with the device you want to connect to the hotspot after setting.

1.Boot into the system. Right-click the starting position and select the Settings option.

2.Select Network & Internet

3.Click [Mobile Hotspot], and click the option on the right to turn on the mobile hotspot function.

4.After selecting the network connection you want to share, you can press [] to change the network name and password frequency band you want to share.

5.The name of the network to be shared by the closed wheel password frequency bandThe name of the network to be shared by the password frequency band.

6.After the date is completed, you can see the device that is connecting to this mobile hotspot on the function page.

Here's how: 1. First, right-click on the start menu of Windows 10 and open the command prompt [Administrator] to enter.

2. To create a wireless wifi hotspot, the key is two contents, one is to create a wireless wifi name, the other is the wireless wifi password, and directly enter the command in the command prompt: netsh wlan set hostednetwork mode=allow ssid=daniu1 key=czx123456 In the command here, the SSID is followed by the wireless wifi name, and the key is followed by your own wireless wifi password. You can set it according to your needs, of course, you can also copy the command here directly and paste it into the command prompt window, and then press enter to run the command.

3. Then here in the command prompt, continue to enter the command netsh wlan start hostednetwork, and then press enter, start the created handsless WiFi network, as shown in the Biki scrambling diagram.

4. Now you can use other wireless devices to connect to the created wireless wifi hotspot to see the effect, but if you can't connect, you can use this method to try the effect. Right-click the network icon in the taskbar and select Open Network & Sharing Center.

6. Here you can see the wireless network wifi hotspot just created with the command. Microsoft Hosted Network Virtual Adapter Virtual NIC!

7. Now you can right-click on the connected network and select Properties to enter.

8. In the sharing interface, select the other user here to connect through the Internet of this computer.

9. Of course, if you want to turn off the wireless WiFi hotspot you created, enter the command netsh wlan stop hostednetwork in the command prompt, and press enter to turn off the created wireless WiFi hotspot.

1. Win10 official version to create WiFi hotspot conditions:

The computer must be equipped with a wireless network card, especially for desktops, which need to be purchased separately. The laptop, on the other hand, has an integrated wireless network card, which can directly create a WiFi hotspot.

2. Win10 official version to create wifi hotspot method:

Right-click the "Windows" button in the lower right corner of the desktop, and select the "Command Prompt (Administrator)" item from its right-click menu.

3. From the "Command Prompt" interface that opens, enter the big trap command: netsh wlan set hostednetwork mode=allow ssid=diy8442 key=12345678

And press enter to create a WiFi hotspot with "SSID" as "DIY8442" and password as "12345678".

4. Next, enter the command: netsh wlan start hostednetwork

5. Then you can try to connect to this wireless wifi hotspot on your mobile phone. If you can't connect to this WiFi hotspot, continue to set it up as follows: Enter the "Network Connection" interface, find the newly created WiFi hotspot and right-click, and select the "Properties" item from its right-click menu.

6. From the "Properties" window that opens, switch to the "Sharing" tab, check the item "Allow other network users to connect through the Internet connection of this computer", and set the "Home Network Connection", as shown in the figure, click "OK" to complete the setting.

Next, you can try to connect to this wifi hotspot.

7. If you want to disable this wireless wifi hotspot, you just need to enter the command:

netsh wlan stop hostednetwork

And press enter to turn off the newly created wifi hotspot.

8. In addition, we can also create WiFi hotspots with the help of third-party tools such as "360 Free WiFi". Directly in the "360 Security Guard" - "More Features" list, find "Free WiFi" and click to open.

9. At this time, "360 Free WiFi" will automatically create a WiFi network, and then you can get the WiFi name and WiFi password from the pop-up window and try to connect.