How do you lower the temperature of your laptop CPU in summer?

Main measures: clean the notebook.

Inspect the cooling fan for damage and replace it immediately if it is damaged.

Check if there is a problem between the CPU and the heatsink: too much or too little silicone, and the CPU and heatsink are not close together.

Apply the silicone evenly between the CPU and the heatsink.

Check if your laptop is overclocked:

If it is overclocked, restore the CPU in the overclocking to its original state.

Change the usage environment of the notebook:

Use in a cool environment, such as in an air-conditioned room.

When your laptop's CPU temperature is too high, you can try the following methods to cool it down:

1.Clean the heat vents and fans: Use an air pressure jar or a fine, soft brush to clean your laptop's heat vents and fans to remove the build-up of dust and debris and keep the heat dissipation good.

2.Use thermal pads: When using your laptop, you can place thermal pads on the bottom of your computer, which provides additional cooling and keeps air flowing.

3.Control your power plan: Set your computer's power plan to Balanced or Energy Saver to limit the power of your CPU and reduce heat generation.

4.Turn off unnecessary programs: Running too many programs can overload the CPU, which in turn can lead to a rise in temperature. Turning off unwanted background programs and applications can reduce the load on the CPU, and reduce the heat.

5.Improve air circulation: Keep your surroundings well ventilated, and try to place your laptop on a hard flat surface to avoid clogging the heat vents.

6.Reduced Performance Setting: Colenia is used to reduce heat generation by reducing the frequency or performance of the CPU. This can be set up via BIOS or power management software.

7.Update drivers and operating systems: Make sure your laptop's drivers and operating systems are up to date for better compatibility and performance optimization, reducing the likelihood of temperature rises.

8.Consider buying a radiator and fan: If the above methods are not effective in lowering the temperature, consider purchasing an external radiator and fan to increase the cooling effect.

Please note that if the CPU temperature is still too high after several attempts, or if the laptop is too hot while it is being used properly, it is recommended to consult a professional repairer or contact the laptop manufacturer for further inspection and repair.

The heat dissipation of notebooks has always maintained a relatively high degree of attention, and experts believe that notebooks. The ideal operating temperature is:"30 degrees above the surrounding environment"But in fact, such an ideal working environment is difficult to achieve. So what is the right temperature for the laptop?

The advice provided by the manufacturer is just that:"Don't let your laptop CPU temperature exceed 75 degrees"75 degrees is the operating high line specified by the CPU manufacturer, which means that the core temperature of the CPU should not exceed 75 degrees.

1.Observe the PF usage of the CPU and check whether the system processes are running unwanted software or viruses.

2.Clean up the rotten dust of the laptop radiator, if there is a problem with the fan, you should replace the fan in time, and check whether the CPU silicone is evenly applied.

3.Turn on the air conditioner in summer (the cooling effect is related to the temperature set by the air conditioner).

4.Using a household electric fan to blow the air has a good effect (the cooling effect is related to the air volume, which can cool down by about 4-9 degrees).

5.Raise the height of the laptop and desktop (about 2-6 degrees cooling).

6.Add a laptop cooling chassis to the laptop. (Approximately 4-15 degrees cooler).

I suggest that for everyone's beloved book, add a heat dissipation chassis, which can reduce the temperature of the core by 4-15 degrees, and run large-scale software, games, and ** software can be guaranteed.

Laptops are recognized by consumers because of their super portability, but they are also because of their super portable performance, resulting in poor heat dissipation performance

1. Increase the external heat dissipation pad, the heat dissipation pad is the most commonly used accessory of the notebook, the principle is to raise the notebook high, enhance the ventilation ability of the upper and lower sides of the notebook, and achieve the effect of enhancing the heat dissipation capacity.

2. Disassemble the machine to clean up the dust, due to the relatively small space of the laptop, a lot of dust will accumulate inside the laptop after long-term use, which will affect the heat dissipation, we can regularly clean up the dust to enhance the heat dissipation capacity of the notebook.

3. Replace the silicone grease, the connection between the laptop heat dissipation system and the CPU, graphics card and other chips is through the silicone grease for heat conduction, the long-term high temperature will cause the silicone grease to dry out, and the dry silicone grease will become poor, affecting the heat dissipation, and the regular replacement of the silicone grease of the notebook can enhance the heat dissipation capacity of the notebook.

4. Increase heat dissipation copper tubes, the connection between the laptop radiator fan and the CPU and graphics card is through the heat dissipation copper tube, the general notebook conducts heat through 2 copper tubes, and the heat dissipation capacity can also be enhanced by increasing the number of heat dissipation copper tubes, but due to the limited internal space of the laptop, increasing the heat dissipation copper tube needs to depend on the situation.

The above method is to reduce the temperature by enhancing the thermal capacity, or it can be solved by reducing the temperature of the notebook itself, the heating of the notebook is mainly concentrated in the power supply IC, CPU, graphics card chip, and the following is a way to reduce the heat generation:

1. Modify the power plan, modify the power plan to energy saving or low power consumption in the system, which can limit the heat generation of the CPU and graphics card chips to achieve the effect of cooling.

2. Reduce the time of full load operation, time-sharing processing of tasks when using the computer, avoid processing multiple tasks at the same time, avoid the computer running at full load for a long time, and achieve the purpose of controlling the computer heating.

Personally, it is recommended to directly put the air conditioner group to call out the air outlet, so that the temperature should be able to suppress it.