What should I do if my phone can t find the network of the WiFi sharing master?

Updated on technology 2024-03-14
6 answers
  1. Anonymous users2024-02-06

    Here's how to set up data sharing with other devices:

    1.Turn on the mobile data function on your phone and select it as a net access point. Settings - (Connections) - Mobile Network.

    The name of the access point.

    2.Settings - (Connection) - Wi-Fi Hotspot and Tethering Mobile Hotspot and Tethering - Mobile Hotspot - Slide the switch (tap the name or password to set it yourself).

    3.Turn on the wireless network of the other device.

    2.When the mobile hotspot is turned on, the connected Wi-Fi network will be automatically disconnected.

  2. Anonymous users2024-02-05

    Method 1: Turn off the hotspot created by the current wifi sharing master, then modify the wifi name to English, and try again;

    Method 2: Restart the wireless network card in the win7 system, the specific steps are as follows:

    1) First, click the small network icon in the lower right corner of the taskbar, and then select the "Open Network and Sharing Center" item.

    2) In the Network & Sharing Center interface that opens, click on the left. Change adapter settings item;

    3) In the pop-up network connection panel, right-click the wireless network card, and then use the wifi sharing master to recreate, the wifi sharing master will automatically open the wireless network card that was just disabled;

    Method 3: Disable the ARP firewall of 360.

    Check whether the 360 firewall in your computer is turned on, and if so, turn off the 360ARP firewall; Then restart the computer, and then create a wifi network to search for it should solve the problem.

    Method 4: Turn off the Wi-Fi network of the mobile phone first, and then turn it back on and refresh it to see if you can find the hotspot you created.

    Method 5: Turn off the current WiFi hotspot and try to create it again.

    If the above methods still don't work, it is recommended to use the driver wizard or driver master to update the wireless network card driver.

  3. Anonymous users2024-02-04

    The issue that WiFi Sharing Master did not find the wireless network card can be solved by following the following steps:

    1. Check whether the switch of the wireless network card is turned on, press and hold the "fn key" and "wireless signal key" of the notebook at the same time, the key of the wireless signal can refer to the computer manual, you need to press and hold the "fn key" and the key of this wireless signal logo at the same time to turn on the wireless network card;

    2. Determine whether the computer has a wireless network card, if there is a wireless network card, you need to check whether it is plugged in and whether it is in good condition;

    3. If the wireless network card driver is not suitable and the wireless network card driver needs to be updated, it is recommended to use driver software such as driver wizard to detect and update the driver software;

    4. It is possible that other drivers or related software occupy the wireless network card, you can close other related software, and set it not to start with the boot, and then restart the computer;

    5. Diagnose the wireless network card, enter the "network and Internet network connection of the control panel" in the control panel, right-click on the "wireless network connection", select diagnosis, and then use the wifi sharing master to create a wifi hotspot after the diagnosis is over. This solves the problem that the wifi sharing master did not find the wireless network card.

  4. Anonymous users2024-02-03

    1. After the wifi sharing master is installed and created successfully, the mobile phone cannot be connected or connected, but it cannot be connected to the network.

    At present, most of the users who encounter network problems are in this situation, please check whether the ARP firewall on the security guard on the computer is turned off, and then look at Windows

    The inbound rules of the firewall are not letting go of the wifi sharing master, it is recommended that you close windows directly

    Firewall, keep the 360 ARP firewall in a closed state, it is best to restart the computer and then leak the file test, generally this time can solve this problem.

    2. After the wifi sharing master is successfully created, the wifi signal cannot be found on the mobile phone.

    This basically happens with Windows

    XP+ Android phone users, this is because the shared WiFi created through the Windows system interface is ADHOC mode, while Android and Windows

    The phone does not support adhoc mode by default, which is caused by the limitation of the system, which causes the phone to be unable to search for the wireless wifi shared by the XP. At present, some models of Android phones can find the adhoc patch of the corresponding system after the phone is rooted (replace the system bin wpa supplicant in the mobile phone system), which can solve the problem, but the operation is risky. It is recommended that everyone will win

    XP upgraded to Win

    7, and win

    XP has stopped pushing patches, and security has been greatly compromised.

    3. The wifi sharing master cannot be used after the computer standby or sleep.

    Some users will put the computer on standby after using the wifi sharing master, or the computer will automatically enter the standby mode after not operating, at this time the wireless network card of the computer will automatically stop working, and the wifi sharing master will not be used of course, after turning on the computer again, you can recreate the wifi network, or restart the computer and then turn it on, so that it is generally no problem.

    4. The wifi sharing master can be used a few days before it is installed, but today the wifi sharing master suddenly can't get on the network?

    There are many users who love to let go of the wifi sharing master after using it, and they have to use it for a long time every day, but some users will have the situation that the wifi sharing master cannot be used, at this time you may need to go to the computer device management to disable the virtual wireless network card device and then turn it on, if you don't know how to operate, you can also directly ** our latest version of the wifi sharing master reinstall to solve.

  5. Anonymous users2024-02-02

    The reason for this situation may be caused by the abnormal sharing service of the system wide socks, you can follow the steps below to use the wifi sharing master's own sharing service driver:

    Right-click from the system tray icon to exit the running WiFi Sharing Master, and find the file in the installation directory of the WiFi Sharing Master.

    Double-roll to open, add a line of "natopen=1" to the [other] field, and then save and exit the file.

  6. Anonymous users2024-02-01

    The mobile phone is connected to the wifi sharing master successfully but can not get on the network solution:

    After the wifi sharing master is successfully created, the problem that the mobile phone is successfully connected to wifi but cannot access the network is mainly because the ip assigned by the wifi sharing master is not obtained, and the user needs to manually write the ip address into the wifi hotspot you need to connect. So how do you set the IP manually?

    In the phone settings, click WLAN, enter the wifi connection interface, click the small button behind the wifi hotspot you are currently connected to, enter the wifi hotspot details page, there is an IP setting below, click DHCP to do all.

    WiFi Sharing Master.

    WiFi Sharing Master.

    WiFi Sharing Master.

    WiFi Sharing Master.

    Then fill in the IP address and gateway domain name according to the instructions in the figure.

    Click WLAN in the settings to enter the WiFi interface, and click the small button behind the WiFi hotspot you are currently connected to enter the WiFi settings page.

    WiFi Sharing Master.

    On the wifi settings page, look at DHCP, BOOTP, and Static below, click Static, and enter data such as IP address and gateway below.

    WiFi Sharing Master.

    Fill in the IP address in the following table.

    The last digit of the IP address is optional).

    WiFi Sharing Master.

    After the IP address is changed, it is OK, and the problem that the mobile phone is connected to the wifi sharing master successfully but cannot access the network can basically be solved.

    Recommended: How to set up a virtual wifi hotspot on a computer by wifi sharing master?

    What should I do if my phone can't connect to the wifi sharing master.

    Why can't I find the wifi sharing master on my phone?

    Tutorial on how to use WiFi Sharing Master.

    How does wifi sharing master let the phone control the computer.

Related questions
10 answers2024-03-14

There are several possibilities that the tablet cannot connect to the wireless network: >>>More

8 answers2024-03-14

There are many reasons why your computer can't find a wifi signal, but the most common ones are as follows: >>>More

18 answers2024-03-14

Dear Samsung users, Hello!

It is recommended that you:1Check the wireless router settings, whether the DHCP function is turned on, 2 >>>More

9 answers2024-03-14

How do I set up wifi sharing on my Huawei phone?Tap Settings, tap Wireless & Network, tap Mobile Tethering, tap Portable WLAN Hotspot, then slide the switch of the hotspot to the right to turn it on, then tap Configure WLAN Hotspot, click on the eye, enter the password, and click Save. Let's show you how. >>>More

6 answers2024-03-14

1.Shutdown: This is definitely the first step to save the phone, no matter how much water ingress the phone, please turn it off first, otherwise it will burn out the circuit directly. >>>More