Why can t my IPD be connected to a stylus?

Some stylus are not supported.

iPad Pro pen and ipad connection method:First take off the cap of the iPad Pro pen and connect it to the lightning interface of iPad Pro, you can automatically note that:When the pen cap is inserted into the lighting interface, you must first turn on the Bluetooth function of iPad Pro, and then the screen will appear pairing,Click to pair,If you can't connect first, see if there is enough power,You can check the power consumption yourself,View method:

Swipe down from the top of the iPad Pro screen – tap on the "Today" bar – select the "" button – then add "Battery" to it, then tap – tap "Done". After connection, if the iPad Pro is not sensitive when using and writing, then it is necessary to see if there is a problem with the pen tip - rotate the Apple Pencil tip counterclockwise - remove the pen tip - replace the new pen tip Apple Pencil can not be dragged and navigated. The new version does not need to be updated, if it is not a problem with the system software, you have to find other reasons, another reason why the iPad pen can not write may be low battery, you need to charge the pen and plug it into the lightning port of the iPad Pro - start charging.

Another way to charge is to purchase an additional Apple Pencil charging adapter separately, which can be connected to use the pen for writing, drawing or other purposes. Sometimes you can't use it to see if Bluetooth is turned on and pairing is good.

Because the iPad is a capacitive screen.

You touch it is an IPS hard screen, right?

It uses a capacitive screen, which is exchanged with the current of the hand to 4 corners to control the click position, and the general pen is a resistive screen, and the middle two layers of metal wire are pressed to let it touch, and then determine the position, the capacitive screen feels good and accurate.

But its pen needs a battery (the new technology doesn't seem to need it), but the pen that can be used on the ipad is very expensive and expensive (at least you can't press the pencil) about 400, so there is no pen by default.

However, the resistive screen can be touched as long as it is a hard object.

So it comes with randomly.

The sensitivity of the capacitive screen is very high, and generally you don't need a pen to draw or anything, and you don't need a pen to give you a little capacitive screen information.

A capacitive touch screen is a layer of transparent special metal conductive substance attached to the surface of glass. When a finger touches a metal layer, the capacitance of the contact changes, causing the frequency of the oscillator connected to it to change to change, and information can be obtained by measuring the frequency change to determine the touch position.

The structure of the capacitive touch screen is mainly to coat a transparent film layer on the glass screen, and then add a protective glass outside the conductor layer, and the double glass design can completely protect the conductor layer and the sensor. Capacitive touch screens are plated with narrow electrodes on all four sides of the touch screen to form a low-voltage alternating current field in the conductive body. When touching the screen, due to the electric field of the human body, a coupling capacitance will be formed between the finger and the conductor layer, and the current emitted by the four electrodes will flow to the contact, and the current strength is proportional to the distance from the finger to the electrode, and the controller behind the touch screen will calculate the proportion and strength of the current to accurately calculate the position of the touch point.

The double glass of the capacitive touch screen not only protects the conductor and sensor, but also prevents external environmental factors from affecting the touch screen, even if the screen is stained with dirt, dust or oil, the capacitive touch screen can still accurately calculate the touch position. Since the capacitance changes with temperature, humidity or grounding, it is not stable and tends to drift. This touch screen is suitable for the commissioning phase of system development.

The ipad has a charger and it's already very atmospheric...

The iPods don't have chargers.

Do you still count on a stylus?

How to connect the Pro Pen to the iPad: First take off the cap of the iPad Pro Pen and connect it to the I....

2.It is worth noting that when the pen cap is plugged into the lighting interface, the Bluetooth function of the iPad Pro must be turned on ,.. first

3.If you can't connect to see if there is enough power, you can check the power consumption by yourself, check the method: from the iPad P....

4.After connecting, if the iPad Pro is not sensitive when writing, then it is necessary to see if there is a problem with the nib - inverse.

Pencil can't do dragging, navigation and envy operations: this is generally the system is or the old version.

When you see the Pair button, tap it.

When Apple Pencil is paired, it stays paired until you restart your iPad, turn on airplane mode, or pair your Apple Pencil with another iPad. When you're ready to use your Apple Pencil, just pair it again.

Make sure that your Apple Pencil (2nd generation) is connected to the magnetic connector that beats around the center of the right edge of your iPad. For Apple Pencil (1st generation), remove the cap and plug your Apple Pencil into the Lightning connector on your iPad.

Restart your iPad, then try pairing it again.

Go to Settings > Bluetooth and make sure that Bluetooth is turned on.

On the same screen, look for Apple Pencil under My Devices. If you see Apple Pencil, tap . Then tap Forget This Device.

If you don't see the Pair button, wait a minute for your Apple Pencil to charge. Then try connecting your Apple Pencil again until you see the "Pair" button.