-
Anonymous users2024-02-06Answer: The length of the step working line refers to the distance from the surface of the step to the working line during the construction process. Specifically, when building a staircase, in order to ensure the accuracy of the horizontal line and the vertical line of each staircase, a working line needs to be set on the tread of each staircase, and a certain distance is kept from the leading edge of each staircase, and this distance is the length of the step working line.
Explanation: The step work line is a commonly used tool in building construction, which is mainly used to guide the masonry of stairs. When building stairs, it is first necessary to determine the height and width of each staircase, and then set up a working line on the tread of each staircase to ensure the accuracy of the horizontal and vertical lines of each staircase.
In addition, in order to keep the height of each stair consistent, it is also necessary to have a horizontal workline between two adjacent staircases, which is also part of the step workline.
Expansion: In building construction, the setting of the step work line is very important, which directly affects the quality and safety of the staircase. Therefore, when building stairs, it is necessary to carefully measure the height and width of each staircase, and determine the position and length of the working line on the tread of each staircase and the horizontal working line between the adjacent two stairs, so as to ensure the stability and comfort of the staircase.
At the same time, when using the step work line, it is necessary to pay attention to its accuracy and stability, so as to avoid errors and affect the quality of the staircase.
-
Anonymous users2024-02-05The length of the step work line refers to the distance from the power box to the farthest step controller. The step working line refers to the cable that connects the power box and the step controller, which is used to control the operation of the elevator. When designing and installing the elevator, it is necessary to calculate the length of the step working line according to the actual situation to ensure that the elevator can run normally.
Generally, the length of the working line of the stove step should be less than or equal to the specified maximum length to ensure the safety and reliability of the elevator burial. For specific length requirements, you can refer to the design and installation standards of the elevator, or consult the elevator manufacturer or professional.
-
Anonymous users2024-02-04The length of the step line refers to the length of the straight line calculated by the Pythagorean theorem of vertical height and horizontal length, that is, the actual distance calculated according to the inclination and length of the ramp trousers. For example, if there are 10 steps on a slope, the height of each step is 20 cm, and the horizontal distance is 50 cm, then the length of the step working line of this slope is 10 20 cm = 200 cm, the horizontal length is 10 50 cm = 500 cm, and the straight line length is (200 + 500) cm according to the Pythagorean theorem.
-
Anonymous users2024-02-03The step work line refers to the record of the work content and working time of the operator on each station on the production bucket line. The length of the step work line refers to the total length of the work content and working time of all stations on the production line. It can be used to assess the production capacity and efficiency of a production line, as well as to identify bottlenecks and areas for improvement in the production line.
In general, the longer the length of the step work line, the higher the production capacity of the production line, but it can also mean that the production line is bottlenecked and wasted. Therefore, for the management and optimization of the production line, it is necessary to comprehensively consider the length of the step working line, the work content and the working time.
Calculations are required before you can set the exact dimensions. >>>More
1. Some cars can only adjust the high beam, and some can adjust the high and low beam. >>>More
Yes, the wine is made by mixing puree wine with water.
The standard definition of Chinese spirits is: distilled liquor made by cooking, saccharification, fermentation and distillation with grain as the main raw material, Daqu, Xiaoqu or bran koji and liquor mother as saccharification starter agents. It is also known as soju, old white dry, burning knives, etc. >>>More
The answer that interior design consultants usually give us is: the height of the chair is 400mm, and the height of the table is 700mm. The difference between the table and the chair is 300 mm (270 300 mm is reasonable). >>>More
The following is for reference, the height of the sun at noon can be measured by observing the shadow of the object, such as a 1 meter long bamboo pole vertically inserted into the ground, at this time the shadow length is x meters, then the pole and the shadow are perpendicular to each other to form two straight sides of a right triangle, the end point of the shadow and the fixed point connection of the bamboo pole is the hypotenuse of the right triangle, and the angle between the shadow and the hypotenuse is the sun height angle at this timetan = pole length The greater the shadow length of the sun height angle, the shorter the shadow of the bamboo pole. Longitude calculation: >>>More