What materials are used for corridor baseboards, corrugated lines, and window sill boards

1. Baseboard is a special word used in decoration. In the design of the living room, the yin corner line, waist line, and baseboard play a role in visual balance, and the use of their linear feeling, material, color, etc. echo each other in the interior, which can play a better beautifying and decorating effect. Another function of the baseboard is its protective function.

The baseboard, as the name suggests, is the area of the wall that can be kicked by the foot, so it is more susceptible to impact. Making baseboards can better make the bond between the wall and the ground firm, reduce the deformation of the wall, and avoid damage caused by external collisions. In addition, the baseboard is relatively easy to scrub, which is very convenient if the mopping floor is splashed with dirty water.

In addition to its own function of protecting the wall, the baseboard also occupies a considerable proportion in the proportion of home aesthetics. It is the contour line of the ground, and the line of sight often falls on it naturally, and the thickness of the baseboard out of the wall in general decoration is 5mm-12mm.

2. Wave line, also known as wave guide wire, also known as lace or edge line, etc., is mainly used around the ground or in the aisle entrance and other places. Generally, it is a decorative line made around the wall side of the block building (ground); Widths vary. Floors are built with lines that are different from the overall floor color to add to the design effect.

It is mainly processed with some ceramic tiles that have some distinctions from the main color of the floor tiles, and is generally processed mainly with dark tiles.

In the garden, the edge of the stone is generally closed, which is called the corrugated line.

3. The window sill board can be made of wood veneer with woodworking plywood and veneer, or it can be made of cement and stone.

Yes. It would be better to change the window sill board to other colors. Personal feelings.

Do you mean the pale yellow one on the outside? If so, use the line tool to draw a circle around the corner of the wall and close it. Then enter the line segment mode (I don't know if it's called that, anyway, the shortcut key is "3").

With the contour tool, approximate the inward contour 80Finally, extrude the attached material.

Wave line, baseboard these are the special words used in decoration, many owners and friends who do not understand often do not understand the difference and role of the two, in fact, the wave line is also called lace or side line, etc., mainly used around the ground or in the aisle entrance and other places, with some and the main color of the floor tile has some distinction between the tile for edge closing; The baseboard is installed on the wall to enhance the indoor visual space and protect the wall.

The difference between the wave line and the baseboard: 1. Position.

From the point of view of the position, the baseboard is installed on the wall, on the plane of the wall, at the junction of the wall and the ground, and the corrugated line is also paved at the junction of the wall and the ground, but it is paved on the ground, which is on the plane of the ground.

The difference between the wave line and the baseboard: 2. Function.

In terms of function, the baseboard mainly plays the role of indoor visual balance and has the effect of beautifying interior decoration; Another function of the baseboard is its protective function, reducing the damage caused by the impact of external forces, and better making the combination between the wall and the ground firmly reduce the deformation of the wall. The function of the corrugated line is mainly to further decorate the ground, so that the living room floor is more varied, looks like a special artistic charm, and is full of beauty.

The difference between the corrugated line and the baseboard: 3. Material.

In terms of material, the baseboard is relatively rich, mainly divided into ceramic baseboard, glass baseboard, stone baseboard, wood baseboard, PVC baseboard, aluminum alloy baseboard, PS polymer baseboard, etc.; And the corrugated line is mainly the tile corrugated line.

The difference between the corrugated line and the baseboard: 4. Specifications.

In terms of specifications, the height of the baseboard is generally 6-12cm, and the common specifications are 800*110mm, 600*110mm, 1000*110mm, etc.; There is no specific size specification requirement for the corrugated line, and the width of 100mm, 150mm, and 200mm is generally determined according to the size of the room, and it is generally laid continuously along the surrounding of the room floor.

The difference between the wave line and the baseboard: 5. Sense of space.

Visually, where there are cabinets in the room, you can't see it, and it feels like there's no baseboard, so the border feels as if it's broken; The corrugated line can virtually divide the space and enhance the sense of space, and with the corrugated line, the space is complete.

The difference between the corrugated line and the baseboard: 6. Reduce the cost of decoration.

Generally, most of the floor tiles in the living room of home decoration are 600mm, 800mm, no matter how the edge of the shop is often cracked, a brick is too large, cutting trouble, and the loss is also large, at this time the corrugated line just makes up for this defect, the corrugated line is convenient to pave and reduce the loss, and the baseboard is not this function.

The corrugated line can be light brown mesh + beige tile, staggered, but not deviate from the color system.

The corrugated line was first called by Hong Kong, Macao and Guangdong for the stone or floor tile in the paving of stone or floor tiles.

The corrugated lines are generally made of marble (or floor tiles) along the perimeter of the wall, and their width generally varies from 10 to 15 cm, but there are also larger. The construction method is the same as the usual paving marble (or floor tiles), the difference is only the color, which has good decoration.

The dark strip on the ground in the picture is the "wave line".

English transliteration, meaning boundary line.

There is no essential difference between the baseboard and the baseboard, the corner line refers to the handover line between the wall and the ground, the general baseboard refers to the protective layer made in order to prevent the wall from being kicked by the shoes near the ground, usually the baseboard has solid wood and MDF to make two kinds of food, the cost is very rare, the effect is better, the installation of the baseboard should pay attention to climate change to avoid the phenomenon of arching in the future, as well as PVC baseboard and stainless steel baseboard, The cost of stainless steel baseboard is very high, the installation is more complicated, durable, and there is almost no maintenance trouble, but it is generally only suitable for some modern style decoration.

Skirting board and corrugated line are two words commonly used in decoration.

Their use is also different, the difference between the corrugated line and the baseboard The baseboard is installed on the wall against the corner, which mainly plays the role of indoor visual balance and protects the corner, and it can be said that it has both decoration and practicality.

The corrugated line is installed on the ground near the corner of the wall, also called the edge line, wave guide line, the main function is to modify the ground, and then visually divide the area to make the ground look more exquisite.

Floor tiles, corrugated lines, sill stones, baseboards. First of all, ensure the beauty of the floor tiles. A small amount of error can be adjusted to the junction of the corrugated line and the wall, and the sill stone is added, and the plane is completed. The baseboard is finally pasted and pressed on the flat brick, and the seam looks beautiful, but it can also cover up a little error.

According to my many years of experience on the construction site, it is usually: corrugated line, floor tiles, baseboards, sill stones. The general process is the principle of going from the general to the local details, from the outside to the inside.

The main consideration is the problem of stone closing, which is pressed which, to ensure that the lap is firm, and there is no seam cut to return to work. Only when the problem of closing is solved, can we talk about aesthetics again.

Floor tiles, baseboards, thresholds, stone wave lines, because according to the construction process!!

You can use solid wood baseboards, because it is thicker, you can cover up the point, and the solid wood is also high-grade.

All the way to the Spring Decoration Museum.