How to set up an electronic scale to count quantities

The normal steps are: put the container on the electronic scale and press "peel", then count 10 or 20 products and put them in the container, enter 10 or 20 and press "sampling" (or "number setting"), wait for the electronic scale to display the quantity of 10 or 20, and then continue to put the product until it shows 400, take out 400 products, and then continue to put the product in the container, wait for the display of 400 and then take out the product, and so on.

I don't know if it's useful to press what "peeling" after you put 10 products? And why doesn't your electronic scale have a "sampling" or "number setting"?

This is the counting function of the electronic balance, and different electronic scales are a little different, but they are all the same.

5. Counting: first take the sample and put it on the weighing pan, the balance shows the weight of the sample, press the "N" button, and the balance.

Enter the counting state, and "10" is displayed

pcs", at this time, the counting sample is 10, and then press the "n" button to cycle through.

Select the number of samples

cycle), after selection, the measured object can be placed with.

On the weighing pan, the balance shows the number of objects to be measured. Press again to return to the weighing state (i.e., one per press.)

The number of samples counted on the secondary "n" key balance

and weighing state).

1. The premise of using the counting function is that the weight of each item should be the same, preferably the same kind of item, and the weight of a single item should depend on the measurement accuracy of the electronic scale, not too light, and the number of items should be as much as possible.

2. Make sure that the electronic scale is placed on the horizontal table, press the switch key to turn on, and the default is the weighing function in grams.

3. Use the washer as a demonstration, a washer is used as an electronic scale to display the number of 5, and put 10 washers on it, which is equivalent to 50. Press and hold the count button to switch to the counting function, the default display is the last sample number, which is 25, which is inconsistent with our "actual number of 50".

4. Then press the "Unit" key to switch the number of sampling, we switch to 50, so that the sampling is successful, and the electronic scale will know the weight of an item.

5. Remove the gasket on the weighing pan, press the "Count" button again, the number on the display becomes 0, and you can put any number of washers on it. Put 2 washers on here, since our default is that 1 gasket equals 5, so 10 are shown here.

Electronic counting scale: The electronic strain gauge element is used to output a small analog electrical signal by the principle of force deformation, and is transmitted to the weighing display instrument through the signal cable for weighing operation and weighing results.

In addition to the functions of the ordinary weighing scale, the counting scale can also use its counting function to count quickly and easily, with the advantages that the traditional weighing scale can not match, the general counting scale, can be standard or optional RS232 and other communication interfaces, convenient for users to connect printers, computers and other peripheral equipment.

Answer pro, hello, happy to answer your question, 1Enter the weight of a single item first, the more accurate the better, after the weight is determined, put all the items, and the three windows of the counting scale display the values are: the total weight of the unit weight quantity.

This method is suitable for items that are counted frequently, and it is important to know its exact weight, the more accurate the better! )

2.Depending on the size of the item, if it is not very small, you can count 10 first, put it on the scale, enter 10 after stabilization, and the electronic scale will automatically calculate the single weight of the item. Then add the rest of the items directly, and the quantity window will show the quantity.

1.Open the electronic scale and clear it. After entering the unit price, put the object and weigh it out**. By cumulative. (so that you accumulate one) and pick up the item. The weight is automatically reset to zero.

2.Remember not to press, peel, zero and clear at this time. Put the item on it and enter the unit price. Out of the ** after. By cumulative. And so on.

3.The final result is the cumulative weight and amount of the scale.

Question: How about I experiment tomorrow.

Question: What does it mean to count 10 first?

Enter 10 when the number of questions is available

I didn't understand this [hee-hee].

Arrange the steps and operations in order and send them to me.

Answer pro, hello, happy to answer your question, 1Enter the weight of a single item first, the more accurate the better, after the weight is determined, put all the items, and the three windows of the counting scale display the values are: the total weight of the unit weight quantity. This method is suitable for items that are counted frequently, and it is important to know its exact weight, the more accurate the better! )

2.It depends on the size of the item, if it is not very small, put it on the scale, enter the number 10 after stabilization, and the electronic scale will automatically calculate the unit weight of the item. Then add the rest of the items directly, and the quantity window will show the quantity.

The specific operation method of counting electronic scale is as follows:

1. Open the manual first, and the premise of the manual prompting the counting function is that the weight of each item to be counted must be the same, so if there is a condition, prepare some more identical items of the same kind. And the weight of a single item should be determined according to the measurement accuracy of the electronic scale, not too light.

2. Then put the electronic scale on the horizontal plane, press the button in the lower left corner to turn on the electronic scale. The scale starts with the default gram weighing function.

3. Because there are not many of the same items in hand, and the electronic scale sampling is only four gears, so the gasket is used here as a demonstration. One gasket is equivalent to the number of 5 displayed by the electronic scale, and putting 10 washers on it is equivalent to the number of 50 displayed by the electronic scale.

4. Put the washer on the electronic scale, press the counting button in the lower right corner, and switch the function to the counting function, at this time, the display screen shows 25, which does not match our "actual number of 50".

5. Then press the "Unit" button in the lower left corner to switch the sampling quantity function, and the display screen will show 50, which proves that the sampling is successful.

6. Then take off the washers on the weighing pan, press the "count" button in the lower right corner, wait for a few seconds, when the number on the display is 0, you can put any number of washers to count.

First confirm that your scale has a counting function, when counting, take a certain number of samples, such as 50 on the scale, enter the number of 50, sample by number, sample and take the number, you can put the things you want to count count, put the items, and the number column has the corresponding quantity.

Take the electronic scale out of the way first. Wait for the load-bearing keyboard of the electronic scale to zero. Put what you want to weigh on the scale. Enter the amount you sell directly. If your keyboard is single-catty, enter single-catty**. If it is kilograms, enter the kilograms**.

Steps of electronic weighing counting:

1. The counting electronic scale is turned on and preheated for 10 minutes;

2、.Single-weight sampling: manually count out 100 components with the same single weight, and then put the numbered components in the center of the weighing plate, use the number button to enter the quantity value (stupid as 100), and then press the "single-weight setting with the code" button, then the single-weight window of the counting electronic scale Lu stupid shows the single-weight value of this batch of components;

3. Single-weight storage: press and hold the "single-weight setting" button for about 2 seconds to enter any number key from 0 to 9, and the single-weight value at this time has been stored in the electronic scale (data will not be lost due to normal shutdown), so that you can count and weigh;

4. Single-weight adjustment: It can be called at any time every time it is restarted (press the corresponding number key, and then double-click the "single-weight setting" button to adjust the stored single-weight data), and you can count and weigh at any time;

5. Normal counting: take out a number of unknown number of similar components at will to prevent them on the weighing pan, and the counting electronic scale quickly displays the calculation results, and then manually verifies the accuracy of the display results, and the verification results are 100 correct and the error is 0.

Steps of electronic weighing counting:

1. The counting electronic scale is turned on and preheated for 10 minutes;

2、.Single-weight sampling: manually count out 100 components with the same single weight, and then put the numbered components in the center of the weighing plate, use the number button to enter the quantity value (stupid as 100), and then press the "single-weight setting with the code" button, then the single-weight window of the counting electronic scale Lu stupid shows the single-weight value of this batch of components;

3. Single-weight storage: press and hold the "single-weight setting" button for about 2 seconds to enter any number key from 0 to 9, and the single-weight value at this time has been stored in the electronic scale (data will not be lost due to normal shutdown), so that you can count and weigh;

4. Single-weight adjustment: It can be called at any time every time it is restarted (press the corresponding number key, and then double-click the "single-weight setting" button to adjust the stored single-weight data), and you can count and weigh at any time;

5. Normal counting: take out a number of unknown number of similar components at will to prevent them on the weighing pan, and the counting electronic scale quickly displays the calculation results, and then manually verifies the accuracy of the display results, and the verification results are 100 correct and the error is 0.

1.The counting electronic scale is turned on and warmed up for 10 minutes (in order to make the electronic components of the counting electronic scale circuit system reach a thermally stable state;

2.Single weight sampling: Artificial Zen counts 100 components of the same single weight (the more the better, note:

You must not count wrong!! Then put the number of components in the center of the weighing plate, use the number button to enter the quantity value (such as 100), and then press the "single weight setting" key, then the single weight window of the counting electronic scale displays the single weight value of this batch of components, the single weight value displayed at this time is very important, because it is the average value of the 100 elements that carry the celebration, and it is a benchmark value for accurately calculating the quantity in the future;

3.Single-weight storage: Press and hold the "single-weight setting" button for about 2 seconds to enter any number key from 0 to 9, and the single-weight value at this time has been stored in the electronic scale (no data loss due to normal shutdown). In this way, you can count and weigh;

4.Single-reload adjustment: It can be called at any time every time the machine is restarted (press the corresponding number key, and then double-click the "single-weight setting" button to adjust the saved single-weight data), and the counting and weighing can be carried out at any time;

5.Normal counting: take out a number of unknown number of similar components at will on the weighing pan, and the counting electronic scale quickly displays the calculation results, and then manually verifies the accuracy of the display results, and the verification results are 100 correct, and the error is 0.

Abstract 1, look at the manual, the premise of using the counting function is that the weight of each item should be the same, preferably the same kind of item, the weight of a single item should depend on the measurement accuracy of the electronic scale, not too light, and the number of items should be as much as possible;

2. Make sure that the electronic scale is placed on the horizontal table, press the key to turn on, and the default is the weighing function in grams, 3. Use the washer as a demonstration, a washer is used as the electronic scale to display the number of 5, put 10 washers on it, which is equivalent to 50;

4. Press and hold the counting button to switch to the counting function, the default display is the last sampling quantity, which shows 25 here, which is inconsistent with the "actual number of 50";

5. Then press the "unit" button to switch the sampling quantity, switch to 50, the sampling is successful, and the electronic scale will weigh the weight of an item;

6. Remove the washer on the weighing pan, press the "count" button again, the number on the display becomes 0, and any number of washers can be put on it;

7. Put 2 washers on it, because our default is that 1 washer is equivalent to 5, so the display here is 10, if the actual counting of items does not exceed 25, use the ratio conversion method;

How to use an electronic scale to count quantities.

1. Take a look at the manual, the premise of using the counting function is that the weight of each item should be the same, preferably the same kind of item, the weight of a single item should depend on the measurement accuracy of the electronic scale, not too light, and the number of items should be as much as possible;

2. Make sure that the electronic scale is placed on the horizontal table, press the key to turn on, and the default is the weighing function in grams, 3. Use the washer as a demonstration, a washer is used as the electronic scale to display the number of 5, put 10 washers on it, which is equivalent to 50;

4. Press and hold the counting button to switch to the counting function, the default display is the last sampling quantity, which shows 25 here, which is inconsistent with the "actual number of 50";

5. Then press the "unit" button to switch the sampling quantity, switch to 50, the sampling is successful, and the electronic scale will weigh the weight of an item;

6. Remove the washer on the weighing pan, press the "count" button again, the number on the display becomes 0, and any number of washers can be put on it;

7. Put 2 washers on it, because our default is that 1 washer is equivalent to 5, so the display here is 10, if the actual counting of items does not exceed 25, use the ratio conversion method;

Counting is not useful.

That should be the count is broken.

A new electronic scale has never been used to count! I don't know how to set it up.

Take a look at the manual, this general situation is not set by yourself.

It is necessary to have a weighing function to have a scale, to have sampling, or to remove a single weight.