How to register dll files on win10 computers

Start - Run (enter cmd) - Open the Admin Command window, in the command window, type: for %1 in (%windir% system32 *.).dll) do s %1, press enter, until the screen scrolling stops.

After the file is taken down from ****, unzip it first (usually a rar compressed package), and then choose x86 x64 according to the situation of your system, x86 is a 32-bit computer, and x64 is a 64-bit computer. By default, 32-bit systems are supported.

How to use:1Copy the file directly to the system directory

1) Windows 95 98 ME system, copy this file to the C: Windows system directory.

2) Windows NT 2000 system, copy this file to C: Winnt system32 directory.

3) Windows XP Win7 system, copy this file to C: Windows System32 directory.

4) If your system is 64-bit, copy the file to the C: Windowssys WOW64 directory.

2.Then turn it on"Start-Run-Enter regsvr32 for this file name", press enter to solve the error message!

The steps to register a DLL file are as follows:

1. Click Start-Run.

regsvr32 register dll file tutorial hayano figure 12, if your dll file is placed in the root directory of the d drive, then enter regsvr32d: click OK.

3. Note that the DLL file is not placed in the position of the matching position, and it can be placed directly in the root directory of the C drive for convenience.

4. Executing commands directly in the run window can also achieve the same effect:

regsvr32c: windows system32 5, note hall refers to the 64-bit system, you need to run the following command:

regsvr32c:\windows\syswow64\

The steps that need to be placed in the system dll directory are as follows:

2. Copy the file to the directory "C: Windows System32".

3. Click "Zhengwangru Start Cailing Potato List", select the "Run" button, enter: regsvr32, and click OK.

4. Finally, on the pop-up prompt that says the installation is complete, click OK.

The steps that need to be placed in the system dll directory are as follows:

2. Copy the file to the directory "C: Windows System32".

3. Click "Start Menu", select the "Run" button, type: regsvr32, and click OK.

4. Finally, on the pop-up prompt that says the installation is complete, click OK.

Method steps.

1. On the desktop of the computer, select the menu items Start - Run in turn to open the run window.

2. Enter the command regsvr32 in the running window, then add a space, and then enter the full path of the dll file, such as the path in the f drive, the whole command is regsvr32, and press enter after the input is completed.

3. Some dll files can be registered successfully, while some files can not be registered successfully, there will be an error prompt, the example file is an application file of a program.

4. Check again, make sure that there is indeed the DLL file in the path behind the regsvr32 command, and the registration is not functional, copy the DLL file to the system disk C: Windows system32 directory.

5 Then enter the command regsvr32 in the run window, and press enter to see if the registration is successful. This example DLL file registration was unsuccessful.

6. If the registration is unsuccessful, it may be that the DLL file cannot be copied out separately for registration, but it is necessary to use the software installation path where the DLL file is located for registration. Find the file path in the directory where the file is installed.

7. Enter the command regsvr32+full path of the dll file (the path under the directory of the installed software) in the running window, and press enter.

8. At this time, the dll file can be registered successfully.

Start - Run (enter cmd) - Open the Admin Command window, in the command window, type: for %1 in (%windir% system32 *.).dll) do s %1, press enter, until the screen scrolling stops.

In the win10 system, there are a large number of dll files, which is a kind of file on the computer, and a dll file may also be used by different applications, but many users may not know the operation of win10 to register dll files, so how to register dll files in win10? Next, I will tell you the steps of installing the win10 system dll file.

Specific methods: 1. Windows comes with a program to register DLL files (you can directly press the Win+R key and execute it through the "Run" dialog box, and the location of the WIN key is shown in the figure below.)

2. Open "Run" and enter the command shown in the figure below.

3. After the execution, you can see the relevant help command parameters.

System DLL file registration.

1. To register the system DLL file correctly, first ensure the compatibility of the DLL file with the current system platform. If the DLL file you are using is not suitable for the current operating system version, you will be prompted with an incompatibility prompt similar to the one shown below.

2. Secondly, indicate the absolute path of the dll when registering, otherwise there will be an error as shown in the figure below.

3. General Windows-related system DLL files can be registered directly.

4. Click the "OK" button or press the enter key to register successfully.

Third-party DLL file registration.

1. The third-party DLL file registration needs to have administrator permissions, otherwise the registration will fail.

2. In order to execute the registration command with administrator privileges, you can refer to the following two methods, method 1, first find the cmd command prompt, right-click and select "Run as administrator".

3. Next, execute the registration command in the command prompt.

4. The other method is similar to the one above, except that the command is written as a bat batch file. Note: Save the file type to "All Types".

5. Next, right-click on the BAT batch file and select "Run as Administrator".

6. It can still be run, the principle is the same as running directly in the command prompt, but the second method can be convenient for others to operate.

The above is the win10 system dll file installation operation steps,Users who need it can operate according to the steps,I hope it can help you。