The chassis of the car was flooded, and the chassis of my car was flooded yesterday, does it have an

Updated on Car 2024-03-29
15 answers
  1. Anonymous users2024-02-07

    Hello landlord! According to your description, this is likely to be caused by the vehicle wading, the internal moving parts hit and splash water, resulting in a distribution box, connector, relay and other electrical components caused by water and short circuit, water into the electrical parts are often prone to the sequelae of occasional failure, it is recommended to go to the local SSSS or find a qualified car electrician to overhaul and maintain the vehicle, and clean up the water in the car by the way, so as to avoid water accumulation and rust and corrosion of the vehicle.

  2. Anonymous users2024-02-06

    Automobile chassis water inlet treatment method:

    1. If you find that your car chassis is flooded, the first thing you need to solve is how to repair the chassis, so choose to dry or drain the water first.

    2. There is a certain possibility of water entering the chassis, the car will drain out by itself, and if there is water accumulation, the chassis of the car needs to be cleaned.

    3. When cleaning the water of the chassis, it is still necessary to pay attention to some anti-rust treatment, and stagnant water is the most likely to lead to rust.

    4. After solving such a rusty situation, what needs to be done is to simply repair the chassis, which can be directly taken to the 4S shop for maintenance.

    5. The simplest protection technique is to directly coat a layer of waterproof coating on the chassis, which can well block the water from the external environment from entering the chassis.

    6. When carrying out such maintenance, it is still necessary to pay attention to some problems, whether there is a problem with the self-drainage system inside the chassis, if so, then it needs to be maintained.

  3. Anonymous users2024-02-05

    Water ingress into the chassis of the car has no effect on the carAutomobile chassis water inlet treatment:

    1. If it is found that the chassis of the car is flooded, the first thing is to solve how to repair the chassis, and choose to dry the water first;

    2. There is a certain possibility of water entering the chassis, but the car will drain out by itself, and if there is water accumulation, then the chassis of the car needs to be cleaned;

    3. When cleaning the water of the chassis, in fact, it is still necessary to pay attention to some anti-rust treatment, because water accumulation is the most likely to lead to rust;

    Ways to avoid it. 1. After solving such a rusty situation, all you need to do is to repair the chassis, or you can directly take it to the 4S shop for maintenance;

    2. The simplest protection technique is to directly coat a layer of waterproof coating on the chassis, so as to block the water from the external environment from entering the chassis;

    3. When carrying out maintenance, it is necessary to pay attention to whether there is a problem with the self-drainage system inside the chassis, and if so, it needs to be maintained.

  4. Anonymous users2024-02-04

    It is generally not affected by water ingress in the ground, but if the water is half of the tire, the water should be braked first to discharge the water so as not to affect the braking effect.

  5. Anonymous users2024-02-03

    Dear, this question is up to me, it takes a little time to type, please be patient, thank you!

    Question: Hello, my friend has a Mercedes Benz E260 chassis that has been flooded.

    Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! The relevant scheme is as follows: the chassis is flooded, go directly to the repair shop to remove the guard plate at the bottom, and then he has a water hole, just twist the rubber plug of the water hole, and then you can release the water, dry the water If it is indoor water, this has to remove the whole car seat and carpet, dry the carpet, and then find the specific ** water leakage?

    Generally, the skylight is leaking, and it is enough to dredge the skylight water pipe.

    Question: I want to buy, but I don't know if it will affect me? I was next to me when I soaked in water, and I drove for a short while, and after I stopped, I couldn't catch fire.

    The question was not half a wheel, and there was a little water in the cab.

    It doesn't matter, you mainly look at whether there is water in the carpet in the cab? If the carpet is wet, it doesn't matter, just dry it as soon as possible.

    Question: The carpet is wet.

    One point is that the water of the chassis will automatically flow out after passing the water, and the body of his chassis is not sealed, and there will be a little gap for the water to flow out, which is to prevent water from entering when driving on a rainy day, so she will leave a little gap and flowing water.

    If it's a little wet, it doesn't matter, just dry it as soon as possible, if you don't dry it for a long time, it will lead to mold.

    The question was also opened for a while, and it was stopped in a different position, and it couldn't catch fire when it was opened again, and then it was repaired in the 4S shop, and I want to buy it now, but I'm afraid that there will be any big problems in the future.

    What are the problems of soaking the chassis in water?

    If you have done repairs in the 4S shop, there will basically be no major problems.

  6. Anonymous users2024-02-02

    1. If the water ingress in the car is not serious, you only need to open the window to dry it fully when the weather is fine.

    2. Water enters the compartment, the maintenance process is mainly to clean up the water in the car, there are several sealant plugs located in the lower part of the vehicle chassis, and the water in the compartment can be released when the rubber plug is opened, but due to the strong water absorption of the decorative materials in the car, the floor glue should be removed and placed in a spacious space to facilitate the evaporation of water.

    3. If there is still moisture in the car, pay attention to turn on the air conditioner, adjust the vehicle circulation switch to the internal circulation, so that the water vapor in the compartment is discharged out of the car through the air conditioning system, which is a very fast dehumidification method in summer, and you can also buy a simple dehumidification box and put it in the car, or put a roll of toilet paper can also play a role in removing moisture.

    4. Do not start the car after the vehicle is flooded (otherwise all losses will be paid by yourself), take photos on the spot, and at the same time take a picture of your license plate number (can be used as evidence for claims), call the insurance company to report the accident ** (must report within 24 hours), while waiting for rescue, if possible, the vehicle can be powered off (pull out the negative pole), hang up the neutral gear, push the car to a safe area, and report to the insurance company before maintenance to verify the loss as required.

  7. Anonymous users2024-02-01

    Is there any useful way to deal with water ingress into the car chassis?

    1. When it is found that the car chassis is flooded, the water in the car chassis must be wiped dry or drained first, and then the troubleshooting and later maintenance must be considered. Because if you don't do this, it's easy to ignore some hidden water ingress places, and when cleaning the stagnant water on the chassis, you still need to pay attention to some anti-rust treatments, which are most likely to cause rust. Rust can be removed with a rust inhibitor for automobiles, paying special attention to whether the universal joints, bolts, and transmission mechanisms are rusty.

    If there is rust in these areas, it is easy to delay the progress of repairs.

    2. After the rust removal work is completed, it is recommended to hand over the car to a 4S shop or repair shop for car maintenance and leakage inspection, especially to check whether the braking system and brake disc are abnormal, and whether there is rust due to water ingress. At the same time, it is also necessary to check whether the chassis circuit and oil circuit of the car are faulty or blocked, and professionals can hand it over to the maintenance personnel for inspection, and they can also check whether the carpet and power seat have watermarks.

    What should I do if water enters the chassis of the car?

    1. Car owners must conduct a comprehensive inspection of the car, because the car structure is all connected, such as the sunroof on the roof, rainwater flows to the skylight, and the rainwater flows down the sunroof groove to the drainage hole, and then discharged through the usually hidden drainage pipe. If the drain hole in the sunroof is blocked, stagnant water may spill into the car. The chassis of the car generally has drainage holes, after the car wades, the water is discharged from the drainage holes, if the drainage holes are blocked by debris, or the rubber ring of the drainage holes is aging and falling off, the car is easy to be infiltrated by water after passing the water.

    Therefore, after the car is flooded, it is best to open the mat in time for inspection. If there is standing water, it should be dried quickly and the chassis of the car should be dehumidified.

    2. Because the water ingress of the car chassis is generally when the car is in the field or far away from the maintenance site, when the chassis parts are damaged at this time, the car can be driven to the maintenance site by first aid methods according to different fault conditions. If the brake cylinder leaks brake fluid or the cylinder tube is broken, you can make a small pad with iron sheet or copper sheet at the cylinder tube joint, block the pipe, and then tighten the screws, or flatten the fracture, curl and block, so that the wheels can not be used as brakes, and it is more important to pay attention to safety when driving.

  8. Anonymous users2024-01-31

    After the car chassis is flooded, it can not be started again, you should quickly find a trailer to take it to the 4S shop for maintenance, and the car chassis needs to wait for rescuers when the water is in.

  9. Anonymous users2024-01-30

    You can wait for it to dry naturally, if there is stagnant water, you need to release the water, and then do a good job of anti-rust measures for the chassis.

  10. Anonymous users2024-01-29

    I can dry or drain the water from the chassis; If I find that water is ingress, we first release the water, treat the chassis of the car, prevent the chassis from rusting, and then take it to the 4S shop for repair.

  11. Anonymous users2024-01-28

    1. The stagnant water on the chassis of the car should be removed immediately. During the maintenance process, the water in the car should be cleaned up in time, and there are several sealant plugs located in the lower part of the vehicle chassis, and the water inside can be released when the rubber plugs are opened.

    2. Chassis maintenance should be carried out for water accumulation in the chassis. The chassis of the car is the part closest to the ground, and it is also seriously affected by road conditions, and this part is generally the most prone to rust and spots, and there may even be loose perforations at the wheel housing. In the routine maintenance of the car after the rain, we must pay attention to the cleaning and anti-rust treatment of the automobile chassis, and regularly do a car chassis anti-rust treatment.

    If you feel that you can't handle it cleanly or you don't judge the water ingress of the car, it is safest to go to the auto repair shop, after all, there are professional equipment and professional technicians, and you will feel at ease to deal with it.

  12. Anonymous users2024-01-27

    It's been dismantled, dried and wet. The cause of the water accumulation in the chassis could not be found.

  13. Anonymous users2024-01-26

    Hello, remove the mat to dry.

  14. Anonymous users2024-01-25

    Cars are the most common means of transportation we have in life. Now many people have realized their car dreams and have their own cars. After buying a car, how to maintain our car has also become the most concerned issue for many people.

    And water ingress into the vehicle is very harmful to the car. In particular, water ingress into the chassis can easily cause water to enter the engine and cause the engine to be scrapped, and the water will also cause a short circuit in the automobile circuit and burn the original vehicle components. Therefore, we must avoid water ingress into the vehicle and do a good job of daily protection of the vehicle.

    If you accidentally let the chassis of the car run out of water and want to clean it up with the car, you can first tilt the body of the car. Tilting the body of the car allows the water to flow out of the chassis as much as possible by using the inclination. In this way, the water can flow out naturally without moving the vehicle; Secondly, drag it to the 4S store for processing.

    Since improper operation can cause serious consequences, it is best to tow the car to a 4S store for disposal. Drain all the water in the chassis, and then dry the chassis thoroughly; Finally, the chassis should be coated with anti-corrosion materials. The chassis that has been flooded is very tolerant of rust or corrosion, so it is necessary to spray an anti-corrosion layer on the chassis, which can effectively protect the chassis of the vehicle from rust and corrosion, and the chassis is more durable.

    First, the use of the body inclined drainage.

    After the vehicle enters the water, the first need for timely drainage, you can use a certain slope to make the car body have an inclination angle, the vehicle's sail shouting chassis generally has drainage holes, so that the water of the chassis flows out naturally. Then hit ** patiently and wait for rescue.

    Second, go to the 4S store to deal with it.

    It is best not to start the car again when the chassis is flooded, and you can let the trailer be towed to the 4S shop for professional treatment, and it is best not to deal with it personally, so as to avoid greater damage caused by improper operation. In the 4S shop, drain the water of the chassis and dry the chassis.

    3. Spray anti-corrosion layer.

    After the chassis of the vehicle is flooded, it is best to spray a layer of anticorrosive paint, which can not only prevent the chassis from rusting due to water ingress, but also prevent other corrosive objects from corroding and damaging the chassis. It is very necessary.

  15. Anonymous users2024-01-24

    Hello, the car wading chassis will not get into the water, but sell a chassis to the door. will be flooded. Hope mine can help you, thanks.

Related questions
14 answers2024-03-29

The chassis of the car is waterproof, and the chassis armor is made when it leaves the factory. >>>More

15 answers2024-03-29

The chassis of the car includes the steering system of the car! Car driving system! Car brake system! >>>More

9 answers2024-03-29

The automobile chassis is a system, not just a certain component, it is composed of four parts: transmission system, driving system, steering system and brake system. The role of the chassis is to support and install the assembly of the automobile engine and its various components. And accept the power of the engine, so that the car produces movement, to ensure normal driving. >>>More

10 answers2024-03-29

The chassis of the car is composed of four major systems, including the transmission system, the driving system, the steering system and the braking system, and its function is to accept the power of the engine, make the car move and ensure that the car can drive normally according to the driver's control. >>>More

29 answers2024-03-29

Chassis armor is to clean the chassis (or the load-bearing body of the trolley) after the anti-corrosion spraying, spraying is a thin layer of glue, to prevent the body or chassis due to moisture or foreign matter caused by electrochemical corrosion rust, from the purpose, the chassis armor is not for noise reduction, but because of that thin layer of glue, the sand and gravel debris rolled up by the wheels will not make a harsh impact sound when knocking on the body or chassis, and also reduces the noise generation to a certain extent.