The energy saving principle of the light tube in the tube???

At present, there are two main ways to achieve energy saving in the entire lighting industry.

Journey 1: By improving the luminous efficiency and increasing the illuminance of the unit space, the actual power of the lamp is reduced and the purpose of energy saving is realized. The luminous effect of traditional T8 lamps is generally 45LM W 65LM W, and the luminous efficiency of T5 lamps is about 80LMW, and the luminous efficiency of real pure three-base T5 lamps is about 90LMW.

Route 2: Because our straight tube lamps are all 360° light, and straight tube lamps are installed on the ceiling or installed.

On the wall, only 180 degrees of light is needed, and we can use the reflection principle to reflect back the light of Duoshe, increase the brightness, which can reduce the actual rate and achieve the purpose of more energy saving.

For example, the T5 bracket lamps and lanterns that are widely popular in the market at present, LED lamps (18W-20W), are used to improve the light efficiency and reduce the actual power to achieve the purpose of energy saving, the power-saving rate of T5 bracket lamps and lanterns is generally between 30%-40%, and the power-saving rate of LED lamps and lanterns is generally between 50%-60%.

At the same time, the energy-saving lamp (16W-21W) in the light tube uses the two principles of improving light efficiency and reflection, so under the premise of increasing the brightness by about 30%, it can still save about 60% of electricity.

Light Lighting specializes in the production of tube-in-tube, energy-saving lamps, LED street lights, downlights, spotlights and other series of lighting products.

It's very simple.

Installation methods and precautions for energy-saving lamps in pipes.

1: Remove the starter.

2: Remove the T8 tube.

3: Install the energy-saving lamp in the light tube directly on the original T8 lamp panel.

4: Please turn off the power during operation to avoid electric shock.

5: The starter must be removed, otherwise it may damage the tube-in-tube energy-saving lamp.

6: If the energy-saving lamp in the tube cannot be lit after Danxiang modification, you should check whether the internal circuit is normally connected or whether the inductance ballast has been opened.

7: If the original inductor ballast is not damaged, it does not need to be removed, and its series connection in the line can play a filtering role.

Pipe-in-pipe installation only needs to be directly connected to the 220V mains.

Pipe-in-tube energy-saving: nothing more than the reflection in the tube plus high-efficiency energy-saving ballasts and special T5 lamps, as far as I know, Shenzhen Hanliang Technology **** production of SHIL pipe-in-tube series products, the use of special T5 lamps and special closed Ling ballasts is currently the most stable performance in the pipe-in-tube industry, the longest life, the most energy-saving pipe-in-tube energy-saving products. Of course, the back-space brother imitator can also save energy, but the lifespan, energy-saving effect and stability are much worse.

Basically, 16W in the SHINL tube can be worth the illumination of 20W in the back imitator; The life of the SHINL tube in the tube is more than 20,000 hours, and the imitator is generally less than 10,000 hours (because it has no independent technology, it uses the original ordinary T5 tube lighting technology, but the power is reduced by current limiting); The stability of the shinel tube in the tube is very high, only the defect (within the shelf life), and the imitation will generally be about 5%-10% of the bad (within the shelf life) (the worse will be more than 20% or even more than 50%).

Shenzhen Hanliang Technology **** is an energy-saving lamp

Fluorescent tubes, light strips, light strips, flashlights and other products.

Professional manufacturer, the company is headquartered in Shenzhen, Guangdong Province.

Guanlan Town, Bao'an District. Shenzhen Hanliang Technology ****.

It has a sound and scientific quality management system. Shenzhen.

The integrity, strength and product quality of Hanliang Technology.

The volume has been recognized by the industry. Welcome friends from all walks of life to visit Shenzhen.

Shenzhen Hanliang Science and Technology **** visit, guidance and business.

Negotiate. The company has a strong relationship with a number of domestic and foreign universities and scientific research institutions.

United, committed to the research and development of high-efficiency energy-saving lamps. Company research.

The production of shinel tube-in-tube energy-saving lamps has won a number of awards.

National patent, with independent intellectual property rights, energy-saving effect.

Significant; 60%-70% power saving than T8 lamp, better than T5 lamp.

Power saving 40%-50%, more energy-saving than LED fluorescent tubes.

Save money; And it is green and environmentally friendly, with a service life of more than 20,000 hours. The advent of this product for our country and even the world.

Energy savings will play a pivotal role and will be greatly reduced.

Low production costs and environmental protection expenditures of each enterprise and increase.

Productivity. The company has always adhered to the "science and technology people-oriented".

The purpose of the technical force is abundant, and the production process is first.

Enter, the inspection equipment is complete, the management system is perfect, and the technology is perfect.

Leading the world.

Shenzhen Good Brother nanotube tube, can improve illumination, service life up to 20,000 hours, easy to install!

It's the same as the ordinary T8 lamp installation, and the precautions are the same.

Energy-saving lamps and fluorescent lamps are fluorescent lamps, which are sealed in a tube by mercury vapor, and the mercury atoms are excited by an electric current to release ultraviolet light, which in turn excites the phosphor on the tube wall to emit visible light. The fluorescent lamp is a fluorescent lamp of an ordinary ballast, because the 50Hz alternating current is turned on and off 50 times per second, so there is flickering, which is not good for people's eyes, but the energy-saving lamp uses electronic ballast, and the power supply frequency has been converted to more than 20,000Hz, so the flickering phenomenon is not felt, and the human eye is the same as the incandescent lamp, but the light color is blue.

It can be seen that energy-saving lamps and fluorescent lamps are roughly the same in terms of luminous principle, the difference is in the ballast. So there are some differences in their circuits.

Circuit diagram of energy-saving lamp;

Principle and schematic diagram of fluorescent lamp;

Pipe-in-tube energy-saving: nothing more than in-tube reflection plus high-efficiency energy-saving ballasts and special T5 lamps, as far as I know, Shenzhen Hanliang Technology **** production of SHIL pipe-in-tube series products, the use of special T5 lamps and special ballasts is currently the most stable performance in the pipe-in-tube industry, the longest life, the most energy-saving pipe-in-tube energy-saving products. Of course, the imitator can also save energy, but the life, energy-saving effect and stability are much worse.

Basically, 16W in the SHINL tube can be worth the illumination of 20W in the back imitator; The life of the SHINL tube in the tube is more than 20,000 hours, and the imitator is generally less than 10,000 hours (because it has no independent technology, it uses the original ordinary T5 tube lighting technology, but the power is reduced by current limiting); The stability of the shinel tube in the tube is very high, only the defect (within the shelf life), and the imitation will generally be about 5%-10% of the bad (within the shelf life) (the worse will be more than 20% or even more than 50%).

Shenzhen Hanliang Technology **** is an energy-saving lamp

Fluorescent tubes, light strips, light strips, flashlights and other products.

Professional manufacturer, the company is headquartered in Shenzhen, Guangdong Province.

Guanlan Town, Bao'an District. Shenzhen Hanliang Technology ****.

It has a sound and scientific quality management system. Shenzhen.

The integrity, strength and product quality of Hanliang Technology.

The volume has been recognized by the industry. Welcome friends from all walks of life to visit Shenzhen.

Shenzhen Hanliang Science and Technology **** visited Tongyuan, guidance and business.

Negotiate. The company has a strong relationship with a number of domestic and foreign universities and scientific research institutions.

United, committed to the research and development of high-efficiency energy-saving lamps. Company research.

The production of shinel tube-in-tube energy-saving lamps has won a number of awards.

National patent, with independent intellectual property rights, energy-saving effect.

Significant; 60%-70% power saving than T8 lamp, better than T5 lamp.

Power saving 40%-50%, more energy-saving than LED fluorescent lamp bureau absolute tube.

Save money; And it is green and environmentally friendly, with a service life of more than 20,000 hours. The advent of this product has a significant impact on our country and even the whole world.

Energy savings will play a pivotal role and will be greatly reduced.

Low production costs and environmental protection expenditures of each enterprise and increase.

Productivity. The company has always adhered to the "science and technology people-oriented".

The purpose of the technical force is abundant, and the production process is first.

Enter, the inspection equipment is complete, the management system is perfect, and the technology is perfect.

Leading the world.

Hello, the light tube in the tube energy-saving lamp in the whole industry, is trustworthy, the following points are the characteristics of the light tube in the tube:

1: The middle tube of the light tube adopts the most advanced and reasonable split structure, and the lamp or ballast can be replaced at any time, and the after-sales service cost is low.

2: The pipe line in the light tube adopts an integrated line, and there are various protection functions inside the integrated line, mainly including: short circuit, open circuit, abnormal lamp, lamp leakage, high voltage, low voltage, overcurrent, undercurrent, etc.

It can effectively protect the lamp and ballast from burning out.

3: The light tube adopts an integrated circuit in the tube, and the inductance with a relatively high temperature is dried at the other end of the lamp, which not only reduces the temperature of the ballast itself, effectively protects the normal working environment of other electronic components, but also makes the whole ballast circuit arrangement more reasonable, greatly reduces the working space of the rectifier circuit board, and increases the luminous length of the lamp to a greater extent.

4: The light tube in the tube directly adopts the standard national standard T5 lamp, which can be bought everywhere on the market, and is much cheaper than non-lamps.

5: The use of flame retardant and high temperature resistant ABS fireproof materials and draft plastic parts, can withstand high temperature 200C degrees, calling you filial piety to use more safe and reliable.

6: The use of high borosilicate glass tube (commonly known as: explosion-proof tube) has a more beautiful appearance and a light transmittance of more than 95%.

7: The light tube in the light tube is really more efficient than the trichromatic T5 fluorescent light in 88lm w-95lm w, and the brightness is higher.

Please refer to the landlord, thank you!

A lot of light and tubes are not known to be gods.

God-like questions, I can't understand them!