How to tie the bow, how to tie the bow

The left strap is worn from the back to the top, and the right strap is folded up to the left and then down to the right. Lower the left strap and make a circle around the right strap to pass the left strap through the middle gap. Lower the left strap and make a circle around the right strap to pass the left strap through the middle gap.

Bow tie method:

1.Tie the ribbon in a knot at both ends.

2.Press down on the middle position with your hand and bend the right side of the wire into a circle from time to time.

3.Fold the ribbon on the left side from above and hold it down with the thumb of your right hand.

4.Wrap around the top of the right ribbon loop, and then pass through the left ribbon loop.

5.The original right ribbon loop is placed on the left side, and the left ribbon is wound into a circle and passed through the ribbon is tightened on the right side.

6.Trim the ends of the ribbon into a linked shape and the bow is complete.

Gift wrapping method (2) - turn over the bow to tie the method.

This is a bow tie method that uses both sides and the front and back, and the front side outward

1.Tie the ribbon horizontally, facing outward.

2.Fold the right side to the size of a petal.

3.The petals folded out on the left side are longer than those on the right.

4.Refer to **, cross left and right, and leave a hole in the center.

5.The long side is pierced through the hole.

6.Left and right are arranged into equal sizes.

7.Cut the ribbon to a lengthy fit according to the size of the bow, and you're done.

A simple and beautiful bow tie method.

The tie of the bow is as follows:1. Cross the two straps, one on the top and one on the bottom;

2. The upper strap bypasses the lower belt, and then hangs down from the middle of the two belts and tightens it, and ties a slipknot;

3. Fold the lower strap into an S shape on one side of the bow and place it on the right side in the direction of the ribbon;

4. After folding one side of the bow on the top belt, it is drilled through the middle of the two belts to form the left side of the bow;

5. The other side is handled according to step 4;

6. Tidy up the bow a little;

7. A full bow is tied.

The left strap is worn from the back to the top, and the right strap is folded up to the left and then down to the right. Lower the left strap and make a circle around the right strap to pass the left strap through the middle gap. Lower the left strap and make a circle around the right strap to pass the left strap through the middle gap.

: Fold the scarf in half and fold it in half again to the appropriate width.

Step2: Tie a slipknot around your neck and make a loop with the short side in the opposite directionStep3: Wrap the other side around the loop and tie the middle part of the scarf through the top to tie a bow. Form one side of the bow into a flower shape.

A simple and beautiful bow tie method.

The tie of the bow sail shout is as follows:Material preparation: one strap.

1. Stack the two ends of the tape, with the left side on the bottom and the right side on the top.

2. Fold the lower part of the right side and press up two-thirds, and press your thumb at the intersection.

3. With your left hand, pass the lower left strap through the inside.

4. Bypass the center intersection and fold it below the fold in step 2 just now.

5. Pinch the center point and the folded part of the right end with your left hand, use the index finger or middle finger of the sedan car brigade to fold the left end into the hole and poke it out, catch it with your right hand and pull it out.

6. Adjust the length of the stool and tighten it.

The tie of the bow is as follows:Tool: Bow.

1. Stack the two ends of the strap like this, with the left side on the bottom and the right side on the top.

2. Fold the lower part of the right side and press up two-thirds, and press your thumb at the intersection.

3. With your left hand, pass the lower left strap through the inside.

4. Bypass the center intersection and fold it below the fold in step 2 just now.

5. Pinch the center point and the folded part of the right end with your left hand, use your index finger or middle finger to fold the left end into the hole and poke it out, catch it with your right hand and pull it out.

6. Adjust the length and tighten it. Such a simple bow comes out.

The bow tie is as follows:Material preparation: one ribbon.

The operation is as follows: 1. How to tie a single bow: cross the two belts with each other, tie a single knot, fold the belt on the right into an S shape, put the left belt under the belt on the right, pull the belt over from the first hole, and the single bow is tied.

2. Tie the double bow: the two ribbons cross each other, and the nucleus is long on the right and short on the left. Fold the right ribbon twice and fold it into the shape of a bow, wrap the right ribbon around the bow and flip the bow over the stool.

Thread the ribbon on the right through the hole underneath from left to right, tighten the double bow slightly, and tie it.

The bow tie is as follows or eggplant:Step 1: Stack the two ends of the strap like this, with the left side on the bottom and the right side on the top;

Step 2: Fold the lower part of the right side and press up two-thirds, and press the thumb at the intersection;

Step 3: With your left hand, pass the lower left strap through the inside;

Step 4: Bypass the center intersection and fold it below the fold in step 2 just now;

Step 5: Pinch the center point and the folded part of the right end with your left hand, use your index finger or middle finger to fold the left end into the hole and poke it out, catch it with your right hand and pull it out;

Step 6: Adjust the length of the limb and tighten it. Well, such a simple bow is out.

Tools Raw Materials:Clothes. 1. Prepare the materials that need to be tied with a bow.

2. Tie the two ropes in a knot.

<>5. The other one is also folded upward, as shown in the figure below, and then threaded through the arrow part in the figure below.

6. Tighten the ends and tidy up, so that the bow of the macro eggplant system is not easy to fall apart.

The tie of the bow is as follows:

1. Cross the two straps, one on the top and one on the bottom;

2. The upper strap wraps around the lower belt, and then hangs down from the middle of the two belts and tightens it, and ties a slipknot;

3. Fold the lower strap into an S shape of the bow and place it on the right side in the direction of the ribbon;

4. After folding one side of the bow on the top belt, it is drilled through the middle of the two belts to form the left side of the bow;

5. The other side is handled according to step 4;

6. Tidy up the bow a little;

7. A full bow is tied.

The bow is shaped like a bow knot, the production material is not the same, the shape and size are different, but the appearance is beautiful and the old Qingguan is generous, and there are many ways to play it, which embodies the ancient cultural beliefs and strong religious colors of our country, and embodies the good wishes of people to pursue truth, goodness and beauty.