How to maintain and clean wooden toys?

Read step by step.

Buy wooden toys, plastic toys to remember to clean, wipe quiet, it is best to disinfect, wooden toys are easy to black and mildew in a humid environment, when cleaning wooden toys, first use a clean wet towel, gauze or handkerchief dipped in the bottle cleaning solution to wipe the surface of the wooden toy, and then rinse with water, and finally use a clean gauze or handkerchief to wipe the water droplets on the surface of the wooden toy.

When drying wooden toys, you should turn them over, in case some of them are not sunburned, plastic toys are easier to clean, but when washing, you should remove the parts inside, but make sure that you can install it in the end, look at the manual. Some low-quality wood materials used by manufacturers (which are not identifies by ordinary people) are highly absorbent and prone to moths.

It is best to get the sun on a regular basis.

Cloth toys, plush toys, if it is too difficult to dry, or will be afraid of washing, it should be placed in the sun for sterilization, because some are not packaged in bags, too many people leave traces on it, so that the toy is not easy to stain and prolong its life, when buying toys, whether it is a carton or a plastic bag, do not discard it, in order to prepare for storage packaging dust.

In humid climates, in order to prevent toys from getting wet, desiccant can be placed during storage.

Try to avoid backlog in the preservation of stuffed toys to avoid deformation and damage. Most of the plush toys can be washed directly, with a water temperature below 30 degrees or cold water. Dry cleaning is not necessary, and it may even be damaged.

Generally, just wash it in the same way as a sweater. Use fabric softener after washing.

Soak it for better results. (You can use a cheaper shampoo to wash it, and the effect is also good).

Some bulky plush toys can't be washed with water when we can dry clean themPlace the stuffed animal in a large plastic bag and pour in kisher salt (the amount of kosher salt can be determined depending on the size of the toy and how dirty it is). Seal the plastic bag tightly and shake it back and forth up and down, left and right.

After a while, you can see that the color of the stuffed animal is gradually brightening. At this time, the role of salt is not to wash, but to suck up the dust of the stuffed animal.

Wipe with a clean cloth: Don't push too hard and avoid erasing the illustrations off the bricks.

Drying: Wooden building blocks are easy to mold after moisture, so wooden toys should be put in a ventilated place immediately after children play, and when the sun is good, they should be put on the balcony to dry well.

Soak in soapy water, rinse with water and dry.

The baby's toys should be cleaned regularly, some should be properly disinfected, and often taken to the sun to dry, as far as possible to achieve toy hygiene. If some children play with a pungent odor, they should contain harmful substances, such as phthalate plasticizers. Smell the smell when you buy a toy.

You can wash and dry the toys first, try to volatilize the plastic smell, and reduce the peeling and slippery materials and the heavy metal content in them. If the plastic toy is marked with a high temperature that it can tolerate, it can also be boiled before use.

1. Do not rinse with water: because wooden building blocks will swell and deform after encountering water. It is also not possible to wipe it with alcohol and wet wipes.

2. Wipe with a clean cloth: Usually we can use a clean cloth to wipe the blocks, of course, not too hard, so as not to blur the picture of the blocks.

3. Drying: Wooden building blocks are easy to mold after moisture, so they need to be dried on a ventilated balcony regularly, but the time does not need to be too long.

Wooden toys in the toy category of a large category, the history of a long history, wooden toys in Europe and the United States developed countries in each stage of the historical development of each stage, in Europe and the United States has a unique cultural ideology, in the history of their respective countries, German wooden toys are the earliest and most famous. In ancient times in Germany, there was the emergence of belt lathes, wooden toys are processed by belt lathes, and then polished by hand, the size of such wooden toys ranges from very small a few feet to very large toys, and the most representative works of this kind of toys are the wooden ark.

Wash and dry wooden toys.

Wooden toys are becoming more and more favored by parents and dolls for their excellent feel and educational functions. However, wooden toys are prone to blackening and mildew in a humid environment. When we clean wooden toys, we first use a clean gauze or handkerchief dipped in 75% alcohol, 3% lyssos solution or 5% bleach solution, etc., and then wipe it with a dry cloth.

Generally, it is not recommended to wash wooden toys, but if the surface of the toy has been soaked in paint, you can wipe the surface of the wooden toy with a clean gauze or handkerchief dipped in the cleaning solution of the feeding bottle, and then rinse it with a large amount of water, and finally wipe the water droplets on the surface of the wooden toy with clean gauze or handkerchief, and place each piece separately to dry.

tips： 1.When washing and drying wooden toys, turn them from time to time to ensure that the different sides can be fully dried.

2.Good wooden toys are more durable and safer toys, maintenance is not difficult, long-term placement of the wood yellow, as long as the frost paper grinding.

How to clean hamster wooden toys, remember these 3 points and clean up easily.

First, it should not be washed, because the wood will swell and deform when exposed to water.

Second, it is recommended to wipe with a rag, with a clean cloth or handkerchief; Or wipe gently with natural detergent or soapy water, and dry with a dry cloth when finished.

Third, it should not be placed in a damp place, the wood is placed in a damp place, it is easy to become moldy and black, and it needs to be ventilated and dried.

Fourth, it is not suitable to dry for a long time, as long-term exposure to the sun will cause cracks on the paint surface of the wood and affect the appearance.

We are experts in wooden toys, so we know a lot. FYI.

<>This is written by a Tmall** store that buys wooden toys, and it is comprehensive. Relatively professional. You can refer to it!

Yes, but do not expose it to the sun, put it in a ventilated place to dry, and avoid washing in rainy weather.

Wipe it with alcohol and you're good to go.

Toys are your baby's closest companions. Babies often put toys on the floor when they play, and toys are likely to become "dens" of bacteria, viruses and parasites.

。Bacteriologists have made measurements: after 10 days of sterilized toys for the baby, the number of bacterial colonies on plastic toys can reach 3163, wooden toys up to 4934, and fur toys up to 21500, what a terrible number!

It can be seen that it is important to clean and disinfect baby toys, and what method of disinfection should be used according to the material of the toy. 1. Toys made of fur and cotton: they can be exposed to the sun for a few hours.

2. Wooden toys: can be scalded with boiling soapy water. 3. Toys made of metal:

It can be scrubbed with soapy water and then exposed to the sun. 4. Plastic and rubber toys: can be soaked in peracetic acid or disinfectant for 1 hour, then rinsed with water and dried.

Usually, to cultivate the baby's good habit of putting away the toys after playing, parents should pay special attention not to let the baby put the toys in the mouth, and wash hands after completion. Mouth-blowing toys are best played alone to prevent infectious diseases and cross-infection. I wish the baby a happy growth!

I used a lot of wooden blocks when I was a kid.

Wipe with a damp, soft cloth dampened with a diluted mild detergent e.g. clean and shiny.

Wipe it dry with a clean cloth.

At present, the common toy materials on the market are about the following grades from low to high:

Pine, lotus, birch, beech, rubberwood.

The vast majority of low-end toys are made of pine, pine yellow, boils, fast response to atmospheric temperature, easy to expand, extremely difficult to dry naturally, before processing, it needs to be artificially treated, such as drying, degreasing, bleaching, neutralization, so that it is not easy to deform, but the actual pine toys, especially low-end products, are still relatively easy to produce scars, cracks, deformation and other phenomena. The market price is about 700 1200 yuan cubic meters.

Lotus wood material is hard, light gray, straight texture, wood durable, corrosion-resistant, wear-resistant, suitable for flooring, high-end furniture, interior decoration, etc., some low-end wood toys will use this kind of wood, the market price is about 1400 1600 yuan cubic meters.

Birch is light brown to reddish-brown, delicate and soft and smooth structure, elastic, easy to crack and warp when dry, not wear-resistant, good processing performance, smooth cutting surface, good paint and gluing properties, generally used in high-end toys. The market price is about 2200 3000 yuan cubic meters.

Beech wood is heavy, strong, impact-resistant, with a clear grain, an even texture, and a soft and smooth tone. It is heavier than most ordinary hardwoods, and in all wood hardness rankings, it belongs to the middle and upper level, and is used for medium and high-end furniture, and is also used in high-end toys. The market price is about 2800 3400 yuan cubic meters.

Rubber wood is an excellent furniture material, with a relatively distinct mountain wood grain, and the touch surface has a good texture, light yellow-brown, the annual rings are obvious, the wood structure is thick and uniform, the texture is oblique, the wood is hard, the cutting surface is smooth, easy to glue, and the paint coating performance is good. The market price is about 4,500 yuan or more, and the texture is nearly 10,000 yuan.

I don't know what kind of wood yours is made of, if the texture is good, it's OK to simply wipe and wipe It's OK If the texture is not very good, wash it carefully.

Wipe gently with a semi-damp cloth, and use some force on the stained area, but do not use too much force. Keep the rag clean after wiping.

Unscrew off the water with a rinsed damp rag.

Personally, it is recommended to wipe alcohol to disinfect and sterilize.

Wipe with alcohol. Wipe with water again.