What glue is used to glue rubber and iron? What glue is better for glue.

There are the following glues:

1. JL-499 is resistant to 150 degrees of high temperature instantaneous glue.

Waterproof, high temperature resistance with rubber, plastic, rubber, etc., metal bonding, high strength, impact resistance and peel resistance. It has excellent properties such as high performance, high strength, one-component, waterproof, high temperature resistance, aging resistance, etc., and is very suitable for continuous production line operation.

2. JL-480 black rubber instant glue.

Medium viscosity, high strength, etc.; It is used for inert surfaces, bonding porous acidic separation, excellent vibration resistance and heat resistance; Rubber-to-metal plastic bonding. It can be used in the case of large gaps and large dispensing amounts.

High viscosity and impact resistance. The curing is slow, the curing is tough, the adhesion is strong, and the effect of dissolving the two adhesive surfaces can be achieved after bonding. It is an impact-resistant instant adhesive with better shock resistance and peel strength than other series.

It is widely used to bond rubber, plastic metal, and impact resistance. It is more flexible than the bonding of ordinary instant adhesives.

Glue can stick iron, iron is the main element of carbon steel, cast iron, industrial and agricultural production, equipment manufacturing, railway vehicles, roads, bridges, ships, docks, houses, civil engineering are inseparable from steel components, its largest use is for steelmaking; It is also used in large quantities to make cast iron and calcined iron. In these industries, iron is used in the production process, and most of them are bonded with adhesives. Before deciding on the glue, it is necessary to determine what material is bonded with iron in order to know what glue is more appropriate.

1. PVC adhesive iron: for example: JL-6218 metal adhesive transparent plastic multi-purpose glue, which can bond various difficult to stick transparent or white plastic products such as:

Polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), ABS, nylon, sponge, film, foam, etc.; It also has good adhesion to plexiglass, rubber, metal, bamboo, wood, fabric and paper. In particular, it is unique in the mutual adhesion and cross bonding of plastics and metal and non-metallic materials, and is an ideal adhesive material for home appliance industry, radio industry, decoration, packaging and printing industries.

2. PP bonded metal iron: for example: JL-6608 high-temperature resistant polyolefin plastic glue is mainly used in the bonding of PP, PE and ABS, PVC, rubber, ceramics, metals and other materials.

It is widely used in home appliances, printing, handicrafts, brushes, speakers, packaging, gifts and other industries.

3. Other glues for sticking to metal: for example: JL-6118 fully transparent metal plastic glue is mainly used in PP, PE and ABS, PVC, nylon, sponge, foam materials, etc.; It also has good adhesion to plexiglass, rubber, metal, bamboo, wood, fabric and paper, especially for the mutual adhesion and cross bonding of plastic and metal and non-metallic materials, and is an ideal adhesive for home appliances, electronics, decoration, craft toys, thermal insulation materials, packaging and printing industries.

JL-6300 Transparent Strong All-purpose Adhesive: For wood

Materials such as metal, glass, fiberglass, ceramics, masonry, and concrete.

All have excellent adhesion and even leather, rubber, vinyl and many other plastics.

Expansion: Iron and its compounds are also used as magnets, dyes (inks, cyanotypes, rouge pigments) and abrasives (red iron powder). Reduced iron powder is used in large quantities in metallurgy.

The bonding problem of rubber and iron has been bothering us before a manufacturer of rubber products, because they have not been able to find a glue that can not be torn apart by hand after the rubber and iron are bonded, and the glue used a metal all-purpose glue, the color is yellow, and the consistency is relatively high, but the glue can still be torn apart by hand after the glue is cured, so some time ago they brought the material to our company and asked us to help develop this glue.

After analysis, the materials of this manufacturer are iron and rubber. The surface of the iron is treated and galvanized. Rubber is nitrile rubber that has undergone hot vulcanization.

And the glue that binds these two materials, we don't need to develop it again. Because we have a transparent all-purpose adhesive with synthetic resin that can stick these two materials to the point of breakage. Moreover, this transparent all-purpose adhesive has strong initial tack and is suitable for bonding in small areas.

Then, we used our transparent all-purpose adhesive to bond rubber and iron to try to stick a sample to this manufacturer for testing, the customer reported that the sample effect is very satisfied, and it is best that the customer ordered this transparent all-purpose adhesive in our company.

Hello, ERGO5500 and 5600 rubber metal glue are used for rubber adhesive iron, the strength is very good to achieve the tearing effect, and the glue has food-grade certification and RoHS certification, Shenzhen Kingsbang adhesive.

Miss Tang.

1. JL-498 metal instant glue of poly glue.

Small area of iron sheets, a few square centimeters, or even only the size of a grain of rice, the bonding of such a small iron sheet, the selection of metal adhesive is very important to be able to control the amount of dispensing, especially the area is very small, if you can not control the amount of dispensing, glue overflow, will have a great impact on the bonding effect, the use of polyglue JL-498 metal instant glue, 5-8 seconds to complete the positioning, 30 minutes to achieve the use of strength, the smaller the bonding area, the higher the strength, low viscosity, The amount of dispensing can be well controlled by using a PE dropper or needle.

2. AB glue in polyglue metal adhesive.

For a relatively large area of iron sheets, if only the bonding strength is considered, the AB glue in the polyglue metal adhesive is a good choice, AB glue can be divided into epoxy resin AB glue and acrylic AB glue, some strength can achieve the effect of cold welding, after curing are hard, insulation, sealing effect is also good, the cured object has a good acid and alkali resistance, salt spray resistance, solvent resistance, waterproof, oil resistance and other properties. However, the impact and vibration resistance of acrylic AB glue is better than that of epoxy AB glue.

There is also a big difference in the positioning time of the two kinds of AB glue, the positioning time of epoxy resin AB glue is very fine, the fast positioning time is 5 minutes, the slow positioning time reaches 2 hours, and the positioning time of acrylic AB glue is mostly 3-5 minutes. Therefore, AB glue can be adapted to most iron sheet bonding processes.

3. JL-6218 metal adhesive with soft adhesive film after curing.

Iron sheets need to be bent after bonding. At this time, it is necessary to use JL-6218 metal adhesive with soft curing adhesive film, this metal adhesive has a relatively high consistency, good initial adhesion, and will not fall off immediately after applying the glue, the initial curing time is 5-8 minutes, and the curing film is soft, elastic, and has good impact resistance and vibration resistance.

Iron and iron can be bonded with HY-303 glue, or HY-106AB glue. HY-303 metal glue is mainly used for the adhesive of various plastic materials such as metal, ABS, PVC, ordinary plastics and other plastic materials, such as: metal and ABS adhesive, plastic and metal adhesive, metal adhesive wood glue, bonding between various plastics and other materials for rapid adhesion between each other, and the adhesion is super strong.

HY-106AB high-temperature metal glue is mainly used for bonding and bonding glue between various metal products such as iron, aluminum, copper and other metal materials that require high temperature resistance. Hope it helps.

If you need to bond to achieve structural strength, it is recommended that you still use AB glue, which is not so convenient to use, but the adhesion is strong enough after final curing, if it is a small area of Eagle King 503 instant adhesive Large area AB glue and HYD-8M are also relatively good.

What glue is better for sticking iron, first look at the size of the area of the bonding part, whether it needs to be resistant to high temperature and waterproof, etc., a small area of the plane is tightly bonded Suitable for quick-drying glue, h y 3 0 3 This is not bad, high temperature resistance within 80 degrees, general waterproof. If it is a large-area bonding, it is more commonly used to be AB epoxy resin glue, H y 1 0 6 A B can meet the requirements of large-area bonding, because the glue is semi-flowing, try to lay flat and stick when bonding.

Is iron sticky to iron? How much is bonded? If it is a small area, it can be bonded with HY-303 glue, which can be quickly positioned, and if it is a large area, it can be bonded with HY-106AB glue, which can withstand high temperature.

Depending on your requirements, temporary positioning can be done with instant adhesive.

If good strength is required, use acrylic structural adhesive.

If high temperature resistance is required, use silicone structural adhesives.

Need to know, feel free to ask me.

Available in quick-drying, one-component QIS-3008. Slow-dry single-component QIS-5705. Epoxy automatic mixing transparent AB glue QIS-5011.

Iron sticks to iron or iron sticks to something else, thin and thick?

Glue for sticking metal iron.

YH-860 is easy to fit.

Glue iron with QIS 3008L glue is good, **such.

Hello, the adhesive iron glue is made of ergo9900 acrylic structural glue, which has good strength, easy operation and no odor.

Summoning one by one, the glory of the king experience server, the lines, cost-effective, I miss you so much, hahahaha