What glue is good for metal sticking to metal?

Metal-bonded metal, epoxy, polyurethane and cyanoacrylate are all acceptable. However, better options are cyanoacrylate and two-component epoxy adhesives. Which one to use depends on your use case.

The two-component epoxy adhesive, which needs to be mixed before use, creates a very good metal-to-metal bond compared to instant adhesives.

Cyanoacrylates, which provide faster bonding than two-component epoxy adhesives, are ideal for use when the bonding surface is small and the metal surface is tightly bonded together without gaps. Instant adhesive bonding metal can be preliminarily bonded within tens of seconds, with a certain bonding strength, and the maximum strength can be reached after 24 hours.

Adhesive metal iron or stainless steel can be glued with fast-drying HY-303 or slow-drying HY-106AB.

HY-303 metal glue is mainly used for the adhesive of various plastic materials such as metal, ABS, PVC, ordinary plastics and other plastic materials, such as: metal and ABS adhesive, plastic and metal adhesive, metal adhesive wood glue, bonding between various plastics and other materials for rapid adhesion between each other, and the adhesion is super strong.

HY-106AB high-temperature metal glue is mainly used for bonding and bonding glue between various metal products such as iron, aluminum, copper and other metal materials that require high temperature resistance.

Glue for bonding between metals and metals.

YH-860 is easy to fit.

I don't know what you want to glue, we use ky4495, the curing speed of the sticky metal is very fast, and the adhesion is quite good, but according to the glue, this kind of instant adhesive has requirements for the size of the adhesive surface, and it is not suitable for the surface with a large adhesive size, I hope it will help you.

Bonding between metals in small areas with instant adhesives such as CA-65B glue cures quickly

Metal glue is the best for metal bonding, because metal glue is a strong adhesive glue with ethyl cyanoacrylate as the main component, which is mainly used for rapid bonding between various metals, plastics, rubber, jewelry, electronics and other products.

Glue. Glue is an intermediate connecting two materials, mostly appearing in water, belonging to the fine chemical category, with a wide variety, mainly classified by sticky, physical form, hardening method and adherent material.

Common glues include instant glue and epoxy resin.

Adhesive, anaerobic glue, UV glue.

Hot melt adhesives, pressure-sensitive adhesives, latexes, etc.

Glue is a substance that can bond two objects, glue does not exist independently, it must be applied between two objects to play a bonding role.

First of all, if a small area of metal needs to be bonded, it is recommended to use quick-drying 303 metal glue. This glue is suitable for bonding a variety of plastic materials such as metal, ABS, PVC and ordinary plastics. It can be used for metal-ABS bonding, plastic-to-metal bonding, and rapid bonding of various materials such as metal bonding wood.

It has a very strong adhesion.

However, if you need to bond a large area of metal and need to be resistant to high temperatures, it is recommended to use 106ab high temperature metal glue. This glue is specially used for bonding and bonding between various metal products, such as iron, aluminum, copper and other metal materials. It is suitable for use in high-temperature environments and has excellent adhesion.

It is a good choice for some products with high requirements for glue, especially when different materials need to be quickly bonded to each other.

I suggest you try it like this:

The first thing is to determine what material the two things to stick are. Whether it is stainless steel and stainless steel or stainless steel and other materials.

2.If it is stainless steel and stainless steel is sticky:

Self-adhesive can be used acrylic structural adhesive, epoxy structural adhesive, silicone structural adhesive; Acrylic has good strength and good sealing, but it smells a little; Epoxy structural adhesive should be used well, the ordinary effect is not good, the weather resistance is also poor, and it may leak after a long time; Silicone structural adhesives have the best sealing, weather resistance and high temperature resistance, but they dry slowly, and it takes at least a day to dry, and it may take two or three days to dry slowly.

3.Stainless steel and other materials to the adhesive

JL-498 metal special quick-drying glue can be selected, simple to use, only need to drop a small drop of glue on the clean and dry adhesive surface, that is, it is time to bond, and press the two adhesives hard, 8-15 seconds can be fixed, 30 minutes can reach the use of strength, 24 hours to reach the maximum strength. It has high strength, good transparency, excellent waterproof, acid and alkali resistance, and is suitable for continuous production line operation.

For rigid PVC plastic to metal, epoxy AB adhesive can also be used for bonding.

Note: If there is dust or oil on the adhesive surface, please clean and dry it before bonding;

If the metal surface is relatively smooth, in order to increase the bonding strength, the metal surface can be ground rough.

Benefits of this one:Stainless steel and other objects can be tightly bonded together, and will not be released and cracked for a long time, this method is relatively simple, the operability is relatively strong, the material is relatively easy to obtain, and it is economical, so it is recommended to use the above method.

Glue classification. 1.Rubber type.

This kind of sealant is based on rubber, and the commonly used rubber is polysulfide rubber, silicone rubber, and polyurethane rubber.

neoprene and butyl rubber, etc.

2. Resin type: This kind of sealant is based on resin, and the commonly used resins are epoxy resin, unsaturated polyester resin, etc

Phenolic resin, polyacrylic resin, polyvinyl resin, etc.

3. Oil-based type. This type of sealant is based on oil, and the commonly used oils are various vegetable oils such as linseed oil and castor oil.

and tung oil, as well as animal oils (such as fish oil), etc.

Sticking to metal can be stuck with 851 glue.

The following points should be paid attention to when choosing the right glue to stick to metal:

One is what kind of metal is made of, such as copper, which is not easy to stick;

The second is the size of the bonding area and the bonding position.

The third is the requirements of the use environment, waterproof, weather resistance, high temperature resistance, etc.

Comprehensive analysis to determine what glue to choose.

What glue can stick to metal the strongest pro! Hello, we are happy to answer for you. Juli brand metal welding glue can stick to the metal the most firmly, if it is just ordinary bonding, there are no special requirements, then the glue that can be used to stick to the metal has a special self-spraying glue for metal; Strong structural adhesives (glass glue, silicone glue, AB glue, etc.) can be used for adhesive technology; If it involves some industrial production, it is also a metal-specific self-spraying adhesive, and another common adhesive is a hot melt adhesive.

The advantages of traditional self-spraying are easy operation and low cost, and the disadvantage is that it is not environmentally friendly; The advantage of hot melt adhesive is that it is environmentally friendly, and the disadvantage is that it is not as convenient to use as self-spraying adhesive. Hope mine can help you! Do you have any other questions?

Adhesive metal can be bonded with a glue containing ethyl cyanoacrylate. It is mainly used for rapid bonding between various metals, plastics, rubber, jewelry, electronics and other products, with strong adhesion. It is widely used in the bonding between metal and metal, metal and electroplating components, plastics, ceramics, wood, stone, glass, nylon, and leather.

It is easy to operate, manual or dispensing machine can be operated, and is suitable for continuous production line operation. First of all, we need to subdivide what material is bonded with metal (such as: ABS and metal bonding, PVC bonding metal, PP bonding metal) ABS and metal bonding glue (such as:

JL* metal adhesive ABS glue) JL* metal adhesive ABS special glue is specially for the bonding of ABS and aluminum, iron, steel and other metal materials. As a general-purpose transparent plastic glue, ABS adhesive metal fully transparent plastic glue has good adhesive properties for most plastics and metals. Composition:

500* cps Shelf life: two years (25) Operating temperature: -10 +60 peel strength 7D n 25mmABS-steel:

100N PP and metal bonded glue (such as: JL* fully transparent metal plastic glue) composed of a single component solid content 50 2% appearance transparent viscous liquid shelf life of one year (25) density (23 1) about PVC-PVC: 15n viscosity (25 cps peel strength 7d n 25mm canvas-canvas:

150N metal-PS foam: tear Total volatile organic compounds 700 g L PVC and metal bonding glue (e.g. JL*PVC adhesive for metal bonding) Composition:

Single-component surface drying time 2-3min color"Brown viscous liquid Solid content 50 2% Density (23 1): about Viscosity (25 : 10000 Shelf life one year (25) Working temperature -10 +60 Peel strength 7d n 25mm canvas - canvas:

180nI also told you above that there are many models of glue that can stick to metal, but the parameters are different. I need to understand what kind of metal you want to glue here, so that I can give you a conclusion. Or you can read the data I sent for yourself and consider it.

851 glue for metal bonding can be adhered to.

I believe that many of them have been encountered in life, and they should be no strangers to it, glue is a substance that can bond two objects. Glue does not exist independently, it must be applied between two objects to play a bonding role. Generally, in the production of metal products, many parts need to be glued together, so what is the best glue to use for sticking metal?

CamKing QN-505AB glue, two-component glue, high bonding strength, low cost, suitable for bonding of various metal materials. However, the high temperature resistance is poor, and the maximum long-term resistance is only 80 degrees; AB is required to be mixed, and the operation is slightly inconvenient. CamKing QN-906AB adhesive is suitable for all kinds of metal bonding, high and low temperature resistance, and extremely high bonding strength.

The use of KeyDAK (KD-340) anoxic adhesive requires pressure sealing and anoxic adhesive layer before curing. High adhesive strength, high and low temperature resistance. Metal bonded with glass and plastic:

Using Jujian G-988 elastic adhesive, the glue is a one-component room temperature vulcanized adhesive, after curing, it is an elastomer with excellent waterproof, shockproof adhesive, high and low temperature resistance, 1-2mm thickness, about 10 minutes of initial solidification, 5-6 hours of basic curing, has a certain strength. It takes at least 24 hours for it to cure completely. One-component, no mixing required, just apply and let stand after extrusion, no need to heat.

Metal bonding with plastic, wood and other materials requires fast positioning: Keydak (KD-833) special strong instant adhesive can quickly bond metal, wood, stone, plastic and other materials in seconds or tens of seconds. The above several glues recommended to you are easy to use for sticking metal, you can choose one of them to use, here is a reminder to everyone:

In the use of glue, too much glue will make the polymers in the glue crowd together; The polymers do not produce good tensile force between them.