Will there be safety problems such as electricity leakage when taking a bath while heating the Saint

Whoever buys it is unlucky, half a year called five after-sales, I don't believe you try, there is a time when you cry, just now the water heater is broken again, and the after-sales service is also mixed and waiting for death, procrastinating.

The new generation of water heaters from Saint Lowe is absolutely guaranteed in terms of safety, and it has four layers of protection to ensure safety: (1) It has a heating structure that separates water and electricity, and the "ECO" high-frequency oscillating heat conduction system can completely isolate water and electricity to heat up. (2) It has a built-in leakage protection device, which can cut off the power supply in a very short time (seconds) in case of slight leakage.

3) This new generation of water heater also has an external leakage protection switch, which is what we often call an air switch. It can further protect the human body. In the event of a short circuit, loss of pressure, etc., the air switch will play a protective role.

4) A safe protective grounding wire that can direct the current to the ground in the event of leakage without danger. (5) Where there is good protection grounding, any household appliance is safe. In addition, Saint Lowe products have passed the 3C certification when they enter China, and the safety is absolutely guaranteed.

My family bought an integrated water heater from Saint-Loway, and used it for a year, about 30 times, and now there is leakage, how can it be said that it is so good, and the quality is really not good.

My home has installed a St. Lowe water heater for less than half a year, and I am struggling to take a bath, what's going on? Whether it's a leakage or not, it doesn't matter if you look for a merchant, say it's normal, and solve it.

Qinqin here for you to find out that the integrated water heater of Saint Lowe does not produce hot water, the reason is that the heater burned out; The integrated water heater is a combination of the rapid electric water heater and shower in the late return hole. There are two reasons why there is no hot water: the heater burns out and there is no heat source.

This situation needs to be solved by replacing the heater. The temperature of the water heater heat exchanger over the water surface is very high, the water flow will produce scale, and a part of the scale will be attached to the heat exchange surface, with the accumulation of use time, the scale layer will become more and more backward, and the scale thermal conductivity is very poor, which will seriously affect the heat exchange, resulting in the difficulty of temperature rise.

Can I use the heating element of the Saint Lowe integrated water heater if it leaks? Everyone will use water heaters now, but when the water heater liner leaks, of course, the brother state can't be used, and the water heater leakage is a big problem. Because when the water leakage occurs, in addition to the water leakage you see, there may also be water leakage in the cavity that you can't see, and these leaking water leaks in the place, which may cause the electrical control part of the electric water heater to fail, and even cause safety accidents, so the water leakage phenomenon should not be underestimated.

If you find that the inner tank of the water heater is leaking, you must solve it in time.

Summary. The Saint Lowe integrated water heater has the following characteristics: the water and electricity are delayed by 3 to 5 seconds to start heating, so as to ensure that the inside of the machine is filled with water before starting the heating, effectively preventing dry boiling, and effectively protecting the service life of the machine. After starting the heating, it heats up in 1 second and keeps the temperature in 2 seconds, in layman's terms, to obtain the same water temperature and water volume, the Saint Lowe instantaneous electric water heater uses much less electricity than the storage electric water heater.

The thermal efficiency of the Saint-Lowe brand instantaneous electric water heater is 95%, and almost all the electricity is converted into heat energy, and there is no waste.

The Saint Lowe integrated water heater has the following characteristics: the water and electricity are delayed by 3 to 5 seconds to start heating, so as to ensure that the inside of the machine is filled with water before starting the heating, effectively preventing dry boiling, and effectively protecting the service life of the machine. After starting the heating, it heats up in 1 second and keeps the temperature in 2 seconds, in layman's terms, to obtain the same water temperature and water volume, the Saint Lowe instantaneous electric water heater uses much less electricity than the storage electric water heater. The thermal efficiency of the Sunxiao electric water heater is 95%, and almost all of the electricity is converted into heat energy, and there is no waste.

That one is out of order, so it's not recommended.

It's best to use it after repairing it, no matter what happens, Bi Zai can have a fluke mentality For the sake of Ye Min's safety, it is recommended that Song Huizhi stop using it for maintenance and use it again, or replace it with a new one.

Can it be repaired?

Sorry pro, the heating element can only be replaced, not repaired.

Replace it with another one.

Summary. What's the deal with the Saint Lowe integrated water heater not heating? 1.

Check whether the power supply is normal: Check whether the power cord is plugged in, and if the power cord is not plugged in, please plug in the power cord. 2.

Check if the power switch is on: Confirm whether the power switch is on, if not, turn on the power switch. 3.

Check whether the electric heating pipe is faulty: Open the protective cover of the electric heating pipe, if the electric heating pipe does not heat up, it means that the electric heating pipe is faulty and needs to be replaced with a new one. 4.

Check whether the water level gauge is faulty: Open the protective cover of the water level gauge, if the water level gauge does not make a sound, it means that the water level gauge is faulty and you need to replace it with a new one. 5.

Check whether the timer is faulty: Check whether the timer is abnormal, if the timer does not work properly, the timer is faulty and you need to replace the timer with a new one.

The Saint Lowe integrated water heater does not heat.

What's going on.

What's the deal with the Saint Lowe integrated water heater not heating? 1.Check if the power supply is in reserve:

Check that the power cord is plugged in, and if the power cord is not plugged in, please plug in the power cord. 2.Check if the power switch is on:

Confirm that the power switch is on, and if not, turn on the power switch. 3.Check if the electric heating pipe is faulty:

Open the protective cover of the electric heating pipe, if the electric heating pipe does not heat up, it means that the electric heating pipe is faulty and needs to be replaced with a new one. 4.Check if the water level gauge is faulty:

Open the protective cover of the water level gauge, if the water level gauge does not make a sound, it means that the water level gauge is faulty and you need to replace it with a new water level gauge. 5.Check if the timer is faulty:

Check whether the timer is abnormal, if the timer does not work properly, the timer is faulty and you need to replace it with a new timer.

The inability to heat up can be caused by the following reasons:1Residual heat sheet switch failure:

Check whether the residual heat plate switch is invalid, and replace it with a new residual heat sheet switch if it fails. Refers to the absence of 2Solenoid valve failure:

Check whether the solenoid valve is invalid, and if it fails, replace it with a new one. 3.Timer Failure:

Check if the timer is faulty, and if it fails, replace it with a new one. 4.Hot Water Circulating Pump Failure:

Check whether the hot water circulating pump fails, and replace it with a new hot water circulating pump if it fails. 5.Program module failure:

Check whether the program module is invalid, and replace it with a new program module if it fails. 6.Water Heater Controller Failure:

Please check whether the rock control device is faulty and rude, and if there is a problem, replace it with a new controller.

Summary. The heater burned out and there was no heat source. This situation needs to be solved by replacing the heater.

The temperature of the water heater heat exchanger over the water surface is very high, the water flow will produce scale, and a part of the scale will be attached to the heat exchange surface, with the accumulation of use time, the scale layer will become more and more backward, and the scale thermal conductivity is very poor, which will seriously affect the heat exchange, resulting in the difficulty of temperature rise. I hope it can help you and I wish you a happy life.

This situation needs to be solved by replacing the heater. The temperature of the water heater heat exchanger over the water surface is very high, the water flow will produce a lack of scale, and a part of the scale will be attached to the heat exchange surface, with the accumulation of use time, the scale layer will become more and more backward, and the scale thermal conductivity is very poor, which will seriously affect the heat exchange, resulting in difficulty in temperature rise. I hope it can help you and I wish you a happy life.

An integrated water heater is a combination of a quick electric water heater and a shower. There are two reasons why there is no hot water: the heater burns out and there is no heat source.

This situation needs to be solved by replacing the heater. With the accumulation of use time, the scale layer will be more and more backward, and the thermal conductivity of the scale is very poor, which will seriously affect the heat exchange, resulting in the difficulty of temperature rise.

Hello, according to your problem description, the solution provided to you here is as follows: the integrated water heater has an abnormal failure and needs to be repaired. During the use of the water heater, as long as the setting conditions are appropriate and the heating body of the water heater is in a normal state, it can be heated normally.

It is recommended to further determine what performance conditions the water heater has at the same time when it cannot heat water, such as faulty ** display, can not be powered on normally, tripping, etc., after determining these things, power off the water heater, open the main electronic control components to check the status of all relevant electrical components. If you can't do it yourself, Ying Changchun should report for repair in time and let the maintenance personnel check and repair. ‍