What is the reason why the 4G signal is very strong but the Internet is not connected?

Updated on technology 2024-03-23
7 answers
  1. Anonymous users2024-02-07

    1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. Re-enter the key attempt.

    2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

  2. Anonymous users2024-02-06

    If the mobile phone cannot access the Internet normally, you can troubleshoot according to the following conditions:

    Situation 1] The contact between the SIM card and the metal contacts of the mobile phone is insufficient, and the SIM card can be reinserted.

    Situation 2] If the SIM card is damaged or there is a problem with the mobile phone, you can change the phone to test whether it is the SIM card or the mobile phone is faulty.

    Situation 3] The current location is a signal blind zone or suddenly no signal, you can change places to test and pay attention to whether the mobile phone signal of other users around you is normal.

    Situation 4] If the mobile phone card is in arrears or is shut down, you can pay off the arrears and turn it on.

    Situation 5] The service is suspended due to abnormal use of the number, such as the number being used for illegal or illegal activities.

    Situation 6] Roaming in Taiwan, Hong Kong, Macao or abroad can only be used after enabling Taiwan, Hong Kong and Macao roaming and international roaming.

    Situation 7] If the total traffic generated by the Internet reaches the ** traffic cap value in the current month, the system will automatically turn off the Internet access function, or limit the speed of the network, and the network will be automatically restored in the next month, which shall be subject to your ** traffic cap rules.

    Feedback, we will check and deal with it as soon as possible.

  3. Anonymous users2024-02-05

    It shows that 4G cannot be connected to the Internet through mobile data, so please turn on your roaming function first.

    2.Pull down the top curtain of the screen to light up the mobile data and turn off Wi-Fi.

    Settings - Mobile Data - Turn on the slider in the upper right corner of the screen - Use Card 1 Data Tsai Pose uses Card 2 data.

    3.Reset the Internet access parameters, turn off the phone and restart the phone after resetting.

    5.If the above operations cannot solve the problem of not being able to access the Internet, please try to change the SIM card of another mobile phone, or you can try again at a different time period or network environment.

    6.Back up data (contacts, SMS, **, etc.), factory reset (Settings - Reset Privacy Personal - Factory Reset).

    7.Try it after upgrading your phone.

    8.If the problem persists, it is recommended that you bring the purchase invoice, repair card and mobile phone to the local service center for professional engineers to help you test.

  4. Anonymous users2024-02-04

    When we use mobile phones, we may find that the 4G signal is full, but we can't connect to the network, and the mobile phone can't use the Internet, causing us to be unable to do a lot of things.

    Finally, if the above methods are useless, we can generally restart the mobile phone and go online, especially if there is no network after just recharging.

  5. Anonymous users2024-02-03

    The reason behind why the 4G network is getting slower and slower, and the signal is full, and the Internet cannot be connected is too realistic.

  6. Anonymous users2024-02-02

    1. Troubleshoot the reason for the failure of the mobile phone, you may leave the area covered by the 4G signal transmitter, so there is no 4G network.

    2. If it is confirmed that it cannot be connected in the 4G signal area, one is the mobile phone system, or the card, and the other is that the software is too much to cause the machine. Or the phone has not been turned off for too long, and a lot of software fragments are retained.

    Solution, shut down and restart first, clean up the running memory, and confirm that the chip card is in good contact with the phone.

  7. Anonymous users2024-02-01

    It is related to the coverage of the 4G network in your area, 4G is not fully covered in China, and it has nothing to do with mobile phones.

Related questions
10 answers2024-03-23

Obviously the 4G network is full, but it still can't access the Internet, why does this situation occur and what should I do?

21 answers2024-03-23

Hello, first of all, thank you for your attention and support to China Telecom. According to your description, the network access wireless broadband (1x 3G) cannot be connected, do you use wireless broadband (WLAN) for dial-up? If the connection fails to use wireless broadband (1x 3G), the username and password are incorrect, or there is a network problem or service, the reason for the error will be displayed in the connection status, and if it detects that wireless broadband (WLAN) is available, it will prompt whether to use wireless broadband (WLAN) to connect to check whether the network or account password is correct, or to connect with wireless broadband (WLAN). >>>More

6 answers2024-03-23

What kind of test is used? Can't go to the Internet?

The problem is more clearly described. >>>More

17 answers2024-03-23

Think about the situations you often encounter when using your phone. It's clear that the 4G signal is full, but the network speed is slower than that of a snail, especially when there are many people. In fact, the main reason for this is network congestion or network failures. >>>More

13 answers2024-03-23

There is a 4G signal on the balcony, but the reason why it is gone when you enter the room: the number of 4G base stations is insufficient, and the high attenuation of the 4G signal frequency band is faster. >>>More