The engine anti theft locking system fault light is on, and the engine will be turned off as soon as

Hello, in this case, the vehicle anti-theft lock, you need to use the computer to rematch the anti-theft, the vehicle engine can start normally! You need to go to the repair shop to find a professional maintenance person to help you match!

This is normal. The anti-theft warning light will flash every once in a while when you close the car door and start the anti-theft. It also flashes during the day, which is normal. Don't worry....

Hello, in this case, you need to go to the repair shop to read the fault code of the engine, take a look at the fault code of the anti-theft, replace the damaged parts, and then use the decoder and password to match the anti-theft. If you don't have a password, you'll need to go to a 4S store.

Hello, this situation is still engine locked. The reason for the inaccessibility is that under normal circumstances, it is necessary to unlock the 4s computer.

Hello, in this case, most of the anti-theft system is locked, let the staff of the repair shop or 4S shop check it.

The vehicle anti-theft lock, you need to use the computer to rematch the anti-theft, the vehicle engine can start normally.

Hello, the engine is anti-theft, you need a password, you can unlock it.

Hello, this situation is caused by your car entering the anti-theft system, which needs to be decoded by a computer.

Hello, the car cannot be started after the engine anti-theft lock, and this can only be started after the store uses the computer to unlock it for you.

If this ignition is turned off, and the engine anti-theft fault light is on, it is recommended that you go to a repair shop to check yourself.

This phenomenon is that the car is anti-theft and needs to match the key from the new computer.

Hello, it is generally a problem with the engine anti-theft system, and you need to go to the store to read the information on the computer.

Hello, this may be due to the fact that the key anti-theft chip is not detected, it is recommended to go to the 4S store to match.

It is normal for car engine anti-theft lights to flash at a frequency of 1 to 2 seconds for 1 time. It shows that the engine of the car has entered the anti-theft state, and the engine anti-theft has begun to work, which is a normal phenomenon, and the owner does not need to remove it, and the power consumption is also minimal, and there is no problem for the battery.

If the battery is dead, the vehicle immobilizer locks the vehicle and makes it impossible to disarm the anti-theft system, open the doors and start the engine via the remote control. It needs to be opened by a mechanical lock, and the battery must be tied or replaced.

Engine anti-theft method.

Add gear locks, steering wheel locks and other mechanical locks, inferior locks are simply not as good as not, brand-name high-end locks can increase some difficulty, but not absolutely, many so-called bounty locks can be opened, it's just a matter of time.

In addition, the anti-theft device has a deterrent effect, but it should be noted that when the general decoration shop is installed, many of them are not equipped with anti-theft flame-out wires, that is, they are installed, because it is a universal connection, so do not rely too much on this anti-theft performance. There is also the wiring method, especially the position of the anti-theft horn should be reasonable, because the first step for thieves to crack the anti-theft device is to cut the speaker wire.

This proves that the vehicle's anti-theft system is working.

When the engine's electronic immobilizer intervenes, it flashes a red light. When the vehicle key is inserted into the keyhole or the vehicle detects the smart key, the engine immobilizer automatically disengages and ignites with the flip of the key switch. If the vehicle does not recognize the key chip, even if the key can be paired, the ECU will not let the engine start, which can play a good role in preventing theft.

Precautions for the use of engine anti-theft indicators.

In order to remove the anti-theft state, the owner can try to disconnect the negative pole of the car's battery for a while, usually about 10 seconds, and then wait until the engine's protection data is cleared before connecting the battery. If it is not removed after trying, it means that the power loss time is not enough, you can turn off the power again, wait for a longer time and then reconnect.

The indicator light must need to consume power, but the power consumption of only one indicator light is very small, the electrical equipment and accessories of the vehicle are a lot, and the power consumption of an engine anti-theft lock system indicator is completely within the tolerance range of the battery.

Explain the failure of the anti-theft system of the car engine. 1. Open the door.

2. Start the engine.

3. One-key start button. The specific method is shown in the following figure:

Fourth, the engine starts. The specific method is shown in the following figure:

5. Press and hold the lock button of the car driver's door for more than 10 seconds to complete the matching. The specific method is shown in the following figure:

That's supposed to be the anti-theft work.

If the car engine anti-theft light flashes at a frequency of 1 to 2 seconds, it is normal. It means that the engine of the car has entered the anti-theft state, and the engine anti-theft has begun to work.

There are two types of vehicle anti-theft, body anti-theft and engine anti-theft. Engine anti-theft is generally displayed on the meter, and within a few seconds after you remove the key, the anti-theft indicator starts to work, and the anti-theft indicator starts flashing at its natural frequency.

It's normal, it's not normal if you don't flash, or it's not normal if you start flashing.

Hello, that's anti-theft work, press the key on it, you can go to the 4S store to rematch the key.

If you have any questions, you can ask them.

Normal, if the car anti-theft light flashes at a frequency of 1 to 2 seconds, it is normal, indicating that the car's engine has entered the anti-theft state, and the engine anti-theft has begun to work:

1. Turn on the ignition switch (put it in the "on" position) and do not start the engine. Observe the engine failure warning light on the dashboard (check warning light), which should be lit;

2. After starting the engine, the engine source fault warning light on the dashboard should be extinguished. If the engine fault warning light is still on, it means that the fault has been detected by the fault self-diagnosis system, or the fault self-diagnosis system itself is abnormal;

3. In most cases, the failure of the electronic control system is caused by the loosening of the joints of the connecting wires of various sensors and actuators. When the engine failure warning light is on, the owner can check whether the wires of the relevant components are loose after turning off the ignition switch;

4. All kinds of wire joints have clamps.

Clamp tightly, when plugging and unplugging the wire, do not hard-pull the wire, after loosening the clamp, hold the connector with your hand for unplugging operation, otherwise it will easily cause damage to the wire joint. After the above preliminary inspection, if the fault cannot be eliminated, it should be repaired at the Bu Naling factory using special instruments for maintenance.

This situation is generally not a normal phenomenon, and it is recommended to go to the garage for repair in time.

Hello landlord! You have the steering wheel locked, insert the key into the lock hole, and then shake the steering wheel from side to side with your hand while unlocking it.

Summary. This situation is caused by a malfunction in the anti-theft system, or if the anti-theft verification fails. In this case, after locking the car, wait for more than half an hour, let the system enter the sleep state, and then restart it to try, or the same problem, the battery will be powered off for more than 10 minutes to clear the fault memory of the system or not, you have to find a master who matches the key with a special computer, crack the anti-theft code and then rematch the car key.

If the match fails, you need to replace or repair the anti-theft computer for maintenance, and the ** of the anti-theft computer is 200 yuan, and no money will be charged if the repair is not good.

Occasionally, the car won't start.

One piece starts and presses it and doesn't respond.

Press it to display the engine immobilizer light.

This situation is caused by a malfunction in the anti-theft system, or if the anti-theft verification fails. In this case, after locking the car, wait for more than half an hour, let the system enter the sleep state, and then restart it to try, or the same problem, the battery will be powered off for more than 10 minutes to clear the fault memory of the system or not, you have to find a master who matches the key with a special computer, crack the anti-theft code and then rematch the car key. If the match fails, you need to replace or repair the anti-theft computer for maintenance, and the ** of the anti-theft computer is 200 yuan, and no money will be charged if the repair is not good.

Yes, this situation is caused by the anti-theft verification has not passed or the anti-theft system itself has problems, according to what I said, it still doesn't work, the owner can't deal with it himself, you need to find the master of automotive electronics or the master with the key to crack the anti-theft and then rematch the car key.

When opening the door, sometimes the remote control of the car does not receive a signal.

You try it first as I said, if it doesn't work, just consider the anti-theft computer damage, or if you have a spare key, try again with another key, both keys are the same problem, repair the anti-theft computer.

How to cut off the power. It's the same for both.

After the battery is turned off, after the engine compartment cover is opened, the battery is disconnected, and it can be disassembled with a 10-gauge wrench.

It is normal for the engine anti-theft lock system indicator light to be on

1. To put it simply, it is to install a set of anti-theft system for the engine, and the car ignition key is equipped with an electronic chip, and each chip is equipped with a fixed ID (the blindness before the phase is equivalent to the identification number);

2. The car can only start when the ID of the key chip is consistent with the ID of the engine side;

3. On the contrary, if it is inconsistent, the car will automatically cut off the circuit immediately, so that the engine cannot be started.