Fuji Xerox M225DW laser printer how to achieve computer wireless connection

The machine is a permanent drum design, and the consumables are toner, which can be easily poured into the toner cartridge and can be used, no maintenance, and the cost of use is low to the limit. With an output speed of 24 sheets per minute, high-quality laser printing, stable working performance, and ultra-high cost performance, it is the first dazzle of small and medium-sized offices and home offices.

1. Enter the printer management interface through the IP address (a large number of omissions here), it is strongly recommended to give the printer and the associated computer static IP to lock, so as not to change every time you log in.

2. Select according to the sequence number of the legend, and finally click "(edit)" or "add", I have already set this one, please ignore it.

3. Look at the illustration, note that you should select "computer cmb" in the second item to display the following diagram. (A drawing is omitted here), and at this point, the settings of the printer that scans wirelessly to the computer can be.

The printer can be used if it has wifi function, and the steps are as follows:

1. Understand the wifi name of the printer;

2. Set the printer's wifi function to be enabled in the computer;

3. Turn on the wifi function of the mobile phone, and search for the wifi name of the printer to confirm the connection;

After the mobile phone shows that the connection is successful, you can print wirelessly.

The specific operation steps for the laser printer to realize the wireless connection of the computer are as follows:

1. First open the control panel of your computer and click on the printer option on the left

2. Then, click to select Add Printer or Scanner Grinder:

<>6. Finally, finally, follow the prompts to select the appropriate driver for the mess, and you can use the Hongdou computer to connect to the printer wirelessly

The M225 printer uses wireless printing, which requires a connection between the printer and a computer. The specific steps are as follows:

1. Check the network connection of the computer connected to the printer. Double-click My Computer to open the My Computer dialog box. On the left, you'll see Online Neighbors. Click Network Neighbors and click View Network Connections on the left.

2. Check the IP address. In the Network Connections dialog box, you can see the existing network connections. Select the local connection, double-click the local connection, the "Local Connection Status" dialog box pops up, click the Support tab, and you can see the IP address here.

If you are using a broadband connection, double-click on the broadband connection to see the IP address.

3. Share the printer. Double-click My Computer, click Control Panel, click "Printers and Other Hardware", and click "Installed Printers or Fax Printers" to enter the Printers and Fax Machines dialog box.

4. Share the printer that is connected to the computer. Right-click the printer and select "Share", after clicking Share, you will see that there is a hand dragging the printer on this printer, and the printer sharing setting is successful.

5. Click the start menu on the wireless network notebook, click Run, and the run dialog box will pop up. Enter the IP address of the computer connected to the printer in the dialog box, access the computer, and if nothing else, you will see the shared printer. Right-click to connect, and after the connection is successful, you can use your laptop to print through the wireless network.

Notes:

The printer must be connected to the same network as your computer for it to take effect, and then you can automatically configure the address for the printer, or you can configure the address manually.