Help, Sony Ericsson T700 mobile phone can t connect to the Internet, what should I do?

It is necessary to set the parameters of mobile phone Internet access, and the specific method is:

1.How to set up Unicom:

Open the access point settings or network settings, and fill in the title uniwap, the gateway address, the gateway port 80, the access point or apn, and the connection mode. If you still don't understand, then call the 10010 customer service, ask them to send a network setting, and fill in the information according to the information they sent.

2.How to set it on the move:

1. GPRS settings:

Step 1: Go to Connect Data Communication Data Account Add Account GPRS Group Data Create a name at random and save it directly without filling it in.

Step 2: Select the name of the establishment APN: CMWAP User ID: Null Password: Null Password Request: Off Preferred Service: Auto IP Address: Null DNS Address: Null Advanced Settings:

1. Identity confirmation: none.

2. Data compression: disabled.

3. Title compression: Closed.

4. Service quality:

1) Preferred: Specified.

2) Delay: Specified.

3) Reliability: specified.

4) Maximum Rate: Specified.

5) Average rate: specified.

Step 3: Enter the connection WAP option WAP Mode Add Mode Create a name (e.g. Monternet): Connection method: Select the name created in the first step IP address:

Step 4: Connect the WAP option WAP Mode to the name of the established Advanced:

1. Change the homepage: Enter Monternet

2. The second account selects the account None.

3. User ID: empty.

4. Password: empty.

5. Security: Closed.

Good luck

Mine is the same, what's going on.

Call 10086 to manual, inform them of your mobile phone model, let them send a configuration message to you, you can install it after you receive it, MMS configuration can also be set in this way, you can go online after installing the configuration information.

Go to the official website, enter the mobile phone number, and let him send it to you.

1. GPRS settings:

Step 1: Go to Connect Data Communication Data Account Add Account GPRS Group Data Create a name at random and save it directly without filling it in.

Step 2: Select the name of the establishment APN: CMWAP User ID: Null Password: Null Password Request: Off Preferred Service: Auto IP Address: Null DNS Address: Null Advanced Settings:

1. Identity confirmation: none.

2. Data compression: disabled.

3. Title compression: Closed.

4. Service quality:

1) Preferred: Specified.

2) Delay: Specified.

3) Reliability: specified.

4) Maximum Rate: Specified.

5) Average rate: specified.

Step 3: Enter the connection WAP option WAP Mode Add Mode Create a name (e.g. Monternet): Connection method: Select the name created in the first step IP address:

Step 4: Connect the WAP option WAP Mode to the name of the established Advanced:

1. Change the homepage: Enter Monternet

2. The second account selects the account None.

3. User ID: empty.

4. Password: empty.

5. Security: Closed.

Parallel trading machines need to reset the Internet access parameters Refer to this post has been tested.

Manually set GPRS settings:

Step 1: Main Menu Phone Settings - > Connections Data Communication Data Accounts Add Account GPRS Data Create a name at will APN: CMWAP, username and password do not need to be filled in - save.

Step 2: Go to "Internet Settings" under "Data Communication" - >Add Mode" - > create a random name (it is recommended to have the same name as the account created in the first step) - > connection method - > select the account in the first step - > save!

Step 3: Then in the mode established in the second part just now, press More-> Settings-> connection mode (don't pay attention, it's actually the one established in the second part just now)-> use**:Yes->**Address:

Or in fact, there is no difference)—>Port number: 80—> user name, password does not need to be filled in—> save!

MMS Settings: Main Menu Message Function Settings—> MMS MMS Mode--> New Mode--> Create a Name at Random--> Message Server:

Internet Mode - > add mode or choose just now"Step 1"The mode of --> save.

Hope it helps.

There are many reasons why the mobile phone can not access the Internet, first check whether the mobile phone card is in arrears, if not, check whether it is a problem with the mobile phone settings, eliminate the above problems or not, you can only take the mobile phone to the repair shop to check.

There is a problem with your network settings and you need to set them up again.

You can follow the steps:

Main Menu - Phone Settings - Connections - Internet Settings - Connection Method (for Data Accounts) option.

New) - PS Data - Account Name (Custom) - Access Point (CMWAP (Mobile) Uniwap (Link.

Pass))-Save On this account, click on the option ()-**Settings(last item)-**(Select.)

Select Open) -**Server-http(**Address; Port 80) - several return operations to.

Data Account Menu - Select the newly created account.

Hello, I have seen your question and am sorting out the answer, please wait a while

Situation 1] The contact between the SIM card and the metal contacts of the mobile phone is insufficient, and the SIM card can be reinserted. [Situation 2] If the SIM card is damaged or there is a problem with the mobile phone, you can change the phone to test whether it is the SIM card or the mobile phone that is faulty. [Situation 3] The current location is a signal blind zone or suddenly no signal, you can change the place to test and pay attention to whether the mobile phone signal of other users around you is normal.

Situation 4] If the mobile phone card is in arrears or is shut down, you can pay off the arrears and turn it on. [Situation 5] The service is suspended due to abnormal use of the number, such as the number being used for illegal or illegal activities. 【Situation 6】Roaming in Taiwan, Hong Kong, Macao or abroad, you need to enable Taiwan, Hong Kong and Macao roaming and international roaming functions before you can use it.

Situation 7] If the total traffic generated by the Internet reaches the ** traffic cap value in the current month, the system will automatically turn off the Internet access function, or limit the speed of the network, and the network will be automatically restored in the next month, which shall be subject to your ** traffic cap rules.

1. It is recommended to select ChinaMobile directly in the network service - data account - GPRS ---

Once GPRS (shown as CMWAP) is confirmed, there will be a connection point inside (select CMWAP); Usernames, passwords, and anything else are left alone.

There is also the setting of 'SIM card selection' in the WAP: you want to select the card that has been activated**.

3. Finally, there is another trick, which is to directly restore the phone to factory settings. Note: When you operate this function, the data in your phone will not be lost, just restore the previous settings to the original factory settings!

If the mobile phone can't connect to the Internet, we can check the network signal first, and see if the mobile data of the mobile phone, wifi is turned on, and so on.

1. First of all, the most common reason why the router can't access the Internet is the network cable problem, the interface of the network cable is easy to loosen, and the network cable itself is also relatively easy to break.

Solution: Plug in the network cable and then restart the router. To restart the router, you should first turn off the power and then wait a few moments, about 30 seconds, before powering the router on.

You can also use the method of restarting the network connection, find the icon of the local connection, click Disable, refresh, and then re-enable. If it's a problem with the cable itself, then just replace it with a new one.

2. If it is not a problem with the network cable, just take a look at the network card, the network card is also a more critical step in the network connection, so it is necessary to check whether its driver is installed normally, and the way to check is to use ping to test the arrival of the packet, and judge whether the driver of the network card is installed according to the details.

Solution: If the NIC is detected to be not in normal operation, then just install its driver.

3. Check whether the local IP address is configured normally, and also look at the gateway information. Enter "cmd" in the "Run" command box of the computer, click OK to enter the next step, and then enter "ipconfig" in the pop-up dialog box, so that you can view the IP address of the machine and some information of the gateway.

Solution: If the IP message is not returned successfully, and the message is not received, then the IP message is wrong, and the IP address needs to be reset and then restart the computer to see if the network returns to normal.

If you find that your phone can't connect to the Internet, first of all, you can check whether there are any users around you who have the same problem.

If the USIM card and the mobile phone can be connected to the Internet normally after the exchange, it is judged that the machine card does not match, and it is recommended to go to the business hall to replace the USIM card.

5. There may be a problem with the system, resulting in a connection to wifi but unable to access the Internet.

There are many reasons why the mobile phone can not access the Internet, first check whether the mobile phone card is in arrears, if not, check whether it is a problem with the mobile phone settings, eliminate the above problems or not, you can only take the mobile phone to the repair shop to check.

Reboot it to try, if it still doesn't work, it is recommended to restore the factory settings.

Check your internet settings. My classmate's mobile phone couldn't get on QQ and couldn't open the web page that time, so I set the network back to CMWAP to use it.

Check whether the mobile phone number is in arrears and whether the mobile phone card is properly placed.

Power off, restart, turn on airplane mode to try.

Take Henan Mobile customers as an example, if your mobile phone cannot access the Internet, please follow the steps below:

1. Check whether this situation occurs in other mobile users around, if there is a similar situation, it may be a local network signal problem. 2. Check the Internet settings of the mobile phone, and you can reset the network parameters and restart the operation of the mobile phone. 3. Change the mobile phone to test whether the SIM is normal.

If you still have problems, you can call the local 10086 to report the situation, and we will be happy to help you.

Restart the phone and try it, if it doesn't work, it's a problem with your network, you can try it with another mobile phone, or you can call the mobile operator's customer service to ask them to repair it after rehearsal, if it doesn't work, there is a problem with the router, you can change to a new router and set it up again.

If the mobile phone suddenly can't get on the Internet, you have to contact the operator's customer service as soon as possible, the mobile customer service, the China Unicom customer service, the telecom customer service, why do you need to contact the customer service at the first time? Because the mobile phone suddenly can't get on the Internet, there are several reasons, the first reason is that someone else stole your mobile phone card, that is, people can't report the loss of a card to the business hall, so you should contact customer service as soon as possible to see if there is such a situation? The second situation is that the local network is not good, the mobile phone network is delayed, and then let the customer service help you synchronize the data and then restart the phone, the third situation is that your mobile phone is broken, to be repaired, generally speaking, the mobile phone suddenly can't get on the network Most of the reasons are the second reason, network delay, the local network is not good, let the customer service help you synchronize the data after restarting it can be 90% yes.

If your phone is not working properly, please check the following:

1. Confirm whether there is a network, it is recommended that you can use it in a place with a strong signal;

2. Check whether there is still a phone bill in the account, if the balance is insufficient, you need to recharge before you can use it;

3. After 3-5 minutes of power off, restart the phone and try again;

4. Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

5. If the traffic usage reaches the maximum value in the current month, the network will be automatically closed, it is recommended that you pay attention to our SMS reminder or inquire about the **product description.

Just go out of the house and go to someone else's house to sit and rub the wifi

There are many reasons why the mobile phone can not access the Internet, first check whether the mobile phone card is in arrears, if not, check whether it is a problem with the mobile phone settings, eliminate the above problems or not, you can only take the mobile phone to the repair shop to check.

If the mobile phone can't connect to the Internet, we can check the network signal first, and see if the mobile data of the mobile phone, wifi is turned on, and so on.